Biomechanical differences in soccer kicking with the preferred and the non-preferred leg

The aims of this study were to examine the release speed of the ball in maximal instep kicking with the preferred and the non-preferred leg and to relate ball speed to biomechanical differences observed during the kicking action. Seven skilled soccer players performed maximal speed place kicks with the preferred and the non-preferred leg; their movements were filmed at 400 Hz. The inter-segmental kinematics and kinetics were derived. A coefficient of restitution between the foot and the ball was calculated and rate of force development in the hip flexors and the knee extensors was measured using a Kin-Com dynamometer. Higher ball speeds were achieved with the preferred leg as a result of the higher foot speed and coefficient of restitution at the time of impact compared with the non-preferred leg. These higher foot speeds were caused by a greater amount of work on the shank originating from the angular velocity of the thigh. No differences were found in muscle moments or rate of force development. We conclude that the difference in maximal ball speed between the preferred and the non-preferred leg is caused by a better inter-segmental motion pattern and a transfer of velocity from the foot to the ball when kicking with the preferred leg.     

Segmental dynamics of soccer instep kicking with the preferred and non-preferred leg

Detailed time-series of the resultant joint moments and segmental interactions during soccer instep kicking were compared between the preferred and non-preferred kicking leg. The kicking motions of both legs were captured for five highly skilled players using a three-dimensional cinematographic technique at 200 Hz. The resultant joint moment (muscle moment) and moment due to segmental interactions (interaction moment) were computed using a two-link kinetic chain model composed of the thigh and lower leg (including shank and foot). The mechanical functioning of the muscle and interaction moments during kicking were clearly illustrated. Significantly greater ball velocity (32.1 vs. 27.1 m . s(-1)), shank angular velocity (39.4 vs. 31.8 rad . s(-1)) and final foot velocity (22.7 vs. 19.6 m . s(-1)) were observed for the preferred leg. The preferred leg showed a significantly greater knee muscle moment (129.9 N . m) than the non-preferred leg (93.5 N . m), while no substantial differences were found for the interaction moment between the two legs (79.3 vs. 55.7 N . m). These results indicate that the highly skilled soccer players achieved a well-coordinated inter-segmental motion for both the preferred and non-preferred leg. The faster leg swing observed for the preferred leg was most likely the result of the larger muscle moment.     

Segmental dynamics of soccer instep kicking with the preferred and non-preferred leg

Abstract

Detailed time-series of the resultant joint moments and segmental interactions during soccer instep kicking were compared between the preferred and non-preferred kicking leg. The kicking motions of both legs were captured for five highly skilled players using a three-dimensional cinematographic technique at 200 Hz. The resultant joint moment (muscle moment) and moment due to segmental interactions (interaction moment) were computed using a two-link kinetic chain model composed of the thigh and lower leg (including shank and foot). The mechanical functioning of the muscle and interaction moments during kicking were clearly illustrated. Significantly greater ball velocity (32.1 vs. 27.1 m · s^?1), shank angular velocity (39.4 vs. 31.8 rad · s^?1) and final foot velocity (22.7 vs. 19.6 m · s^?1) were observed for the preferred leg. The preferred leg showed a significantly greater knee muscle moment (129.9 N · m) than the non-preferred leg (93.5 N · m), while no substantial differences were found for the interaction moment between the two legs (79.3 vs. 55.7 N · m). These results indicate that the highly skilled soccer players achieved a well-coordinated inter-segmental motion for both the preferred and non-preferred leg. The faster leg swing observed for the preferred leg was most likely the result of the larger muscle moment.     

Kinematic comparison of the preferred and non-preferred foot punt kick

Kicking with the non-preferred leg is important in Australian Football and becoming important in the rugby codes. The aim of this study was to examine differences between preferred and non-preferred leg kicking in the drop punt kick. Seventeen elite Australian Football players performed kicks with the preferred and non-preferred leg. Optotrak Certus collected kinematic data of the kick leg and pelvis (200 Hz) from kick leg toe-off until ball contact. Foot speed, knee and shank angular velocity at ball contact, and pelvis range of motion were significantly larger for the preferred leg (P < 0.05). In contrast, hip and thigh angular velocity at ball contact and hip range of motion were significantly larger for the non-preferred leg. This indicates different movement patterns, with preferred-leg kicks making greater use of the pelvis, knee, and shank while non-preferred leg kicks rely relatively more on the hip and thigh (P < 0.05). Reasons for this difference might be due to locking degrees of freedom or sub-optimal sequencing in the non-preferred leg. The thigh-knee continuum identified by Ball ( 2008 ) was also evident in this study. Findings have implications for training non-preferred leg kicking for performance and injury prevention.     

The effect of muscle fatigue on instep kicking kinetics and kinematics in association football

The aim of this study was to examine the effect of leg muscle fatigue on the kinetics and kinematics of the instep football kick. Fatigue was induced by repeated, loaded knee extension (40% body weight) and flexion (50% body weight) motions on a weight-training machine until exhaustion. The kicking motions of seven male players were captured three-dimensionally at 500 Hz before and immediately after the fatigue protocol. The significantly slower ball velocity observed in the fatigue condition was due to both reduced lower leg swing speed and poorer ball contact. The reduced leg swing speed, represented by a slower toe linear velocity immediately before ball impact and slower peak lower leg angular velocity, was most likely due to a significantly reduced resultant joint moment and motion-dependent interactive moment during kicking. These results suggest that the specific muscle fatigue induced in the present study not only diminished the ability to generate force, but also disturbed the effective action of the interactive moment leading to poorer inter-segmental coordination during kicking. Moreover, fatigue obscured the eccentric action of the knee flexors immediately before ball impact. This might increase the susceptibility to injury.     

Mechanical factors associated with the development of high ball velocity during an instep soccer kick

The purpose of this study was to determine whether joint velocities and segmental angular velocities are significantly correlated with ball velocity during an instep soccer kick. We developed a deterministic model that related ball velocity to kicking leg and pelvis motion from the initiation of downswing until impact. Three-dimensional videography was used to collect data from 16 experienced male soccer players (age = 24.8 ± 5.5 years; height = 1.80 ± 0.07 m; mass = 76.73 ± 8.31 kg) while kicking a stationary soccer ball into a goal 12 m away with their right foot with maximal effort. We found that impact velocities of the foot center of mass (CM), the impact velocity of the foot CM relative to the knee, peak velocity of the knee relative to the hip, and the peak angular thigh velocity were significantly correlated with ball velocity. These data suggest that linear and angular velocities at and prior to impact are critical to developing high ball velocity. Since events prior to impact are critical for kick success, coordination and summation of speeds throughout the kicking motion are important factors. Segmental coordination that occurs during a maximal effort kick is critical for completing a successful kick.     

优势脚与非优势脚正脚背踢球的运动学特征对比研究

足球运动中踢球脚有优势脚与非优势脚之分,优势脚踢球主要表现为踢球力量大、出球准确,而非优势脚则与之相反。两者摆动腿摆动特征具有相似性,但运用生物力学手段对其研究发现,优势脚与非优势脚摆动腿的摆动特征存在很多差异性,主要表现在非优势脚摆动腿的蹬地不充分、股后肌群力量较弱、小腿屈曲不充分、小腿前摆时间过早、膝关节制动太早以及小腿前摆不充分等一系列差异上。因此,平时应该加强非优势脚训练,以形成正确动力定型。     

Kinematic effects of a short-term fatigue protocol on punt-kicking performance

The punt kick is a fundamental skill used in several team sports; however, there has been a lack of research on how fatigue affects its technique. The purpose of this study was to determine the effects of short-term fatigue on punt-kicking performance. Eight elite and sub-elite Australian Football players performed maximal drop punt kicks on their preferred leg prior to, during and after a match-specific fatigue protocol. Optotrak Certus collected kinematic data from kick foot toe-off until ball contact. Repeated-measures analysis of variance showed a significant increase in 20 m sprint times after each short-term protocol, indicating fatigue. Foot speed did not significantly change with fatigue; however, increases in the range of motion at the pelvis and kicking thigh, along with increases in kicking thigh angular velocity, occurred. For the support leg, maximum knee flexion angular velocity increased while there was greater flexion found at the knee and hip, and greater range of motion at the knee. Players are able to make kinematic adaptations in order to maintain foot speed while punting for maximal distance after short-term efforts.     

Biomechanical considerations of distance kicking in Australian Rules football

Kicking for distance in Australian Rules football is an important skill. Here, I examine technical aspects that contribute to achieving maximal kick distance. Twenty-eight elite players kicked for distance while being videoed at 500 Hz. Two-dimensional digitized data of nine body landmarks and the football were used to calculate kinematic parameters from kicking foot toe-off to the instant before ball contact. Longer kick distances were associated with greater foot speeds and shank angular velocities at ball contact, larger last step lengths, and greater distances from the ground when ball contact occurred. Foot speed, shank angular velocity, and ball position relative to the support foot at ball contact were included in the best regression predicting distance. A continuum of technique was evident among the kickers. At one end, kickers displayed relatively larger knee angular velocities and smaller thigh angular velocities at ball contact. At the other end, kickers produced relatively larger thigh angular velocities and smaller knee angular velocities at ball contact. To increase kicking distance, increasing foot speed and shank angular velocity at ball contact, increasing the last step length, and optimizing ball position relative to the ground and support foot are recommended.     

Biomechanical considerations of distance kicking in Australian Rules football

Kicking for distance in Australian Rules football is an important skill. Here, I examine technical aspects that contribute to achieving maximal kick distance. Twenty-eight elite players kicked for distance while being videoed at 500 Hz. Two-dimensional digitized data of nine body landmarks and the football were used to calculate kinematic parameters from kicking foot toe-off to the instant before ball contact. Longer kick distances were associated with greater foot speeds and shank angular velocities at ball contact, larger last step lengths, and greater distances from the ground when ball contact occurred. Foot speed, shank angular velocity, and ball position relative to the support foot at ball contact were included in the best regression predicting distance. A continuum of technique was evident among the kickers. At one end, kickers displayed relatively larger knee angular velocities and smaller thigh angular velocities at ball contact. At the other end, kickers produced relatively larger thigh angular velocities and smaller knee angular velocities at ball contact. To increase kicking distance, increasing foot speed and shank angular velocity at ball contact, increasing the last step length, and optimizing ball position relative to the ground and support foot are recommended.     

Strategies to improve impact efficiency in football kicking

In football, kicking with high ball velocity can increase scoring opportunities and reduce the likelihood of interception. Efficient energy transfer from foot to ball during impact is important to attain a high ball velocity. It is considered impact efficiency can be increased by reducing the change in ankle plantarflexion during foot–ball impact. However, conflicting evidence exists, questioning its effectiveness as a coaching cue. The aim of the present study was to systematically analyse joint stiffness, foot velocity and impact location with a mechanical kicking machine to determine if change in ankle plantarflexion during foot–ball impact and ball velocity are influenced. Sagittal plane data of the shank, foot and ball were measured using high-speed video (4,000 Hz). Increasing joint stiffness reduced change in ankle plantarflexion and increased ball velocity from a greater effective mass. Increasing foot velocity increased change in ankle plantarflexion and increased ball velocity. Distal impact locations increased change in ankle plantarflexion and reduced ball velocity as coefficient of restitution decreased. These results identify that change in ankle plantarflexion is a dependent variable during foot–ball impact and does not directly influence ball velocity. Coaches can assess ankle motion during impact to provide feedback to athletes on their impact efficiency.     

Ground reaction forces and kinematics of plant leg position during instep kicking in male and female collegiate soccer players

The players' ability to achieve the greatest distance in kicking is determined by their efficiency in transferring kinetic energy from the body to the ball. The purpose of this study was to compare the kinetics and kinematics of the plant leg position between male and female collegiate soccer players during instep kicking. Twenty-three soccer players (11 males and 12 females) were filmed in both the sagittal and posterior views while performing a maximal instep kick. Plant leg kinetic data were also collected using an AMTI 1000 force platform. There were no significant differences between the sexes in plant leg position, but females had significantly greater trunk lean, plant leg angle, and medial-lateral ground reaction force than the males. Males showed higher vertical ground reaction forces at ball contact, but there were no significant differences in ball speed at take-off between the sexes. Ball speed at take-off was inversely related to peak anterior-posterior ground reaction force (-0.65). The anatomical differences between the sexes were reflected in greater trunk lean and lower leg angle in the females.     

The dynamic impact characteristics of tennis balls with tennis rackets

The dynamic properties of six types of tennis balls were measured using a force platform and high-speed digital video images of ball impacts on rigidly clamped tennis rackets. It was found that the coefficient of restitution reduced with velocity for impacts on a rigid surface or with a rigidly clamped tennis racket. Pressurized balls had the highest coefficient of restitution, which decreased by 20% when punctured. Pressureless balls had a coefficient of restitution approaching that of a punctured ball at high speeds. The dynamic stiffness of the ball or the ball-racket system increased with velocity and pressurized balls had the highest stiffness, which decreased by 35% when punctured. The characteristics of pressureless balls were shown to be similar to those of punctured balls at high velocity and it was found that lowering the string tension produced a smaller range of stiffness or coefficient of restitution. It was hypothesized that players might consider high ball stiffness to imply a high coefficient of restitution. Plots of coefficient of restitution versus stiffness confirmed the relationship and it was found that, generally, pressurized balls had a higher coefficient of restitution and stiffness than pressureless balls. The players might perceive these parameters through a combination of sound, vibration and perception of ball speed off the racket.     

Ground reaction forces and kinematics of plant leg position during instep kicking in male and female collegiate soccer players

The players' ability to achieve the greatest distance in kicking is determined by their efficiency in transferring kinetic energy from the body to the ball. The purpose of this study was to compare the kinetics and kinematics of the plant leg position between male and female collegiate soccer players during instep kicking. Twenty-three soccer players (11 males and 12 females) were filmed in both the sagittal and posterior views while performing a maximal instep kick. Plant leg kinetic data were also collected using an AMTI 1000 force platform. There were no significant differences between the sexes in plant leg position, but females had significantly greater trunk lean, plant leg angle, and medial-lateral ground reaction force than the males. Males showed higher vertical ground reaction forces at ball contact, but there were no significant differences in ball speed at take-off between the sexes. Ball speed at take-off was inversely related to peak anterior–posterior ground reaction force ( ? 0.65). The anatomical differences between the sexes were reflected in greater trunk lean and lower leg angle in the females.     

The dynamic impact characteristics of tennis balls with tennis rackets

Abstract

The dynamic properties of six types of tennis balls were measured using a force platform and high-speed digital video images of ball impacts on rigidly clamped tennis rackets. It was found that the coefficient of restitution reduced with velocity for impacts on a rigid surface or with a rigidly clamped tennis racket. Pressurized balls had the highest coefficient of restitution, which decreased by 20% when punctured. Pressureless balls had a coefficient of restitution approaching that of a punctured ball at high speeds. The dynamic stiffness of the ball or the ball-racket system increased with velocity and pressurized balls had the highest stiffness, which decreased by 35% when punctured. The characteristics of pressureless balls were shown to be similar to those of punctured balls at high velocity and it was found that lowering the string tension produced a smaller range of stiffness or coefficient of restitution. It was hypothesized that players might consider high ball stiffness to imply a high coefficient of restitution. Plots of coefficient of restitution versus stiffness confirmed the relationship and it was found that, generally, pressurized balls had a higher coefficient of restitution and stiffness than pressureless balls. The players might perceive these parameters through a combination of sound, vibration and perception of ball speed off the racket.     

Technique analysis of the kuda and sila serves in sepaktakraw

The aims of this study were to gain insights on sepaktakraw serves, identify technique differences, and establish factors influencing ball speeds. The best successful kuda and sila serves of nine elite male national sepaktakraw players were captured using seven ProReflex 1000 optical cameras operating at 240 Hz. The kuda and sila serves are non-planar kicking techniques exhibiting a non proximal-to-distal sequence. Differences in kicking kinematics (P < 0.05) signify differences between techniques. Compared with the sila, the kuda kicking limb is a longer rigid segment that moves over a greater range of motion. Together with a greater increase in foot and shank angular accelerations approaching ball contact, this leads to marginally higher kuda foot impact speeds. Since foot speeds were not at their peak during impact, a longer rigid kuda kicking limb was the primary determinant of kuda ball release speeds. Greater range of motion enables the longer rigid kuda lever to generate greater kicking angular momentum, resulting in greater impact impulse. This immediately translated to the significantly higher ball release speeds based on the impulse-momentum relationship. Coaching implications include improving hip joint flexibility and working on a fluid movement of a longer rigid segment kicking technique.     

Technique analysis of the kuda and sila serves in sepaktakraw

The aims of this study were to gain insights on sepaktakraw serves, identify technique differences, and establish factors influencing ball speeds. The best successful kuda and sila serves of nine elite male national sepaktakraw players were captured using seven ProReflex 1000 optical cameras operating at 240 Hz. The kuda and sila serves are non-planar kicking techniques exhibiting a non proximal-to-distal sequence. Differences in kicking kinematics (P < 0.05) signify differences between techniques. Compared with the sila, the kuda kicking limb is a longer rigid segment that moves over a greater range of motion. Together with a greater increase in foot and shank angular accelerations approaching ball contact, this leads to marginally higher kuda foot impact speeds. Since foot speeds were not at their peak during impact, a longer rigid kuda kicking limb was the primary determinant of kuda ball release speeds. Greater range of motion enables the longer rigid kuda lever to generate greater kicking angular momentum, resulting in greater impact impulse. This immediately translated to the significantly higher ball release speeds based on the impulse–momentum relationship. Coaching implications include improving hip joint flexibility and working on a fluid movement of a longer rigid segment kicking technique.     

Kinematics of preferred and non-preferred handballing in Australian football

In Australian football (AF), handballing proficiently with both the preferred and non-preferred arm is important at elite levels; yet, little information is available for handballing on the non-preferred arm. This study compared preferred and non-preferred arm handballing techniques. Optotrak Certus (100 Hz) collected three-dimensional data for 19 elite AF players performing handballs with the preferred and non-preferred arms. Position data, range of motion (ROM), and linear and angular velocities were collected and compared between preferred and non-preferred arms using dependent t-tests. The preferred arm exhibited significantly greater forearm and humerus ROM and angular velocity and significantly greater shoulder angular velocity at ball contact compared to the non-preferred arm. In addition, the preferred arm produced a significantly greater range of lateral bend and maximum lower-trunk speed, maximum strike-side hip speed and hand speed at ball contact than the non-preferred arm. The non-preferred arm exhibited a significantly greater shoulder angle and lower- and upper-trunk orientation angle, but significantly lower support-elbow angle, trunk ROM, and trunk rotation velocity compared to the preferred arm. Reduced ROM and angular velocities found in non-preferred arm handballs indicates a reduction in the degrees of freedom and a less developed skill. Findings have implication for development of handballing on the non-preferred arm.     

The relationship between leg preference and knee mechanics during sidestepping in collegiate female footballers

This study examined the relationship between leg preference and knee mechanics in females during sidestepping. Three-dimensional data were recorded on 16 female collegiate footballers during a planned 45° sidestep manoeuvre with their preferred and non-preferred kicking leg. Knee kinematics and kinetics during initial contact, weight acceptance, peak push-off, and final push-off phases of sidestepping were analysed in both legs. The preferred leg showed trivial to small increases (ES = 0.19–0.36) in knee flexion angle at initial contact, weight acceptance, and peak push-off, and small increases (ES = 0.21–0.34) in peak power production and peak knee extension velocity. The non-preferred leg showed a trivial increase (ES = 0.10) in knee abduction angle during weight acceptance; small to moderate increases (ES = 0.22–0.64) in knee internal rotation angle at weight acceptance, peak push-off, and final push-off; a small increase (ES = 0.22) in knee abductor moment; and trivial increases (ES = 0.09–0.14) in peak power absorption and peak knee flexion velocity. The results of this study show that differences do exist between the preferred and non-preferred leg in females. The findings of this study will increase the knowledge base of anterior cruciate ligament injury in females and can aid in the design of more appropriate neuromuscular, plyometric, and strength training protocols for injury prevention.     

Dynamics of submaximal effort soccer instep kicking

During a soccer match, players are often required to control the ball velocity of a kick. However, little information is available for the fundamental qualities associated with kicking at various effort levels. We aimed to illustrate segmental dynamics of the kicking leg during soccer instep kicking at submaximal efforts. The instep kicking motion of eight experienced university soccer players (height: 172.4 ± 4.6 cm, mass: 63.3 ± 5.2 kg) at 50, 75 and 100% effort levels were recorded by a motion capture system (500 Hz), while resultant ball velocities were monitored using a pair of photocells. Between the three effort levels, kinetic adjustments were clearly identified in both proximal and distal segments with significantly different (large effect sizes) angular impulses due to resultant joint and interaction moments. Also, players tended to hit an off-centre point on the ball using a more medial contact point on the foot and with the foot in a less upright position in lower effort levels. These results suggested that players control their leg swing in a context of a proximal to distal segmental sequential system and add some fine-tuning of the resultant ball velocity by changing the manner of ball impact.