Strong γc-γcl H∞ stabilization for networked control systems under denial of service attacks

This paper is concerned with the strong γ_c-γ_cl H_∞ stabilization problem for networked control systems (NCSs) subject to denial of service (DoS) attacks, which are common attack behaviors that affect the packet transmission of measurement or control signals. The purpose of the problem under consideration is to design a stable dynamic output feedback (DOF) controller (strong stabilizing controller) with the prescribed H_∞ performance norm bound γ_c to tolerate multiple packet dropouts caused by DoS attacks, such that, the closed-loop system is mean-square stable and captures the H_∞ disturbance attenuation norm bound γ_cl. Based on the Lyapunov functional and the stochastic control approach, some sufficient conditions with the form of matrix inequalities for the existence of the desired stable DOF controller are established. Then, by an orthogonal complement space technique, the controller gain is parameterized. Next, an iterative linear matrix inequality (LMI) algorithm is developed to obtain the controller gain. Finally, the usefulness of the proposed method is indicated by a numerical simulation example.     

Tyrosinase activity in photosensitive individuals inin-vitro study

A reddish glow localized within the iris was observed in the photographs of some individuals in the dark using an electric-arc flash. On repeated exposure and reprints of the same individuals to photography under similar conditions, the red glow persisted. Studies were under taken to analyze thein vitro effect of cupric ions on the activity of serum tyrosinase. A significant increase in the activity of tyrosinase was observed in the affected individuals as compared to the controls when cupric ion was supplementedin vitro. Studies also confirmed the inhibitory effect of benzoic acid on serum tyrosinase activityin vitro. Our preliminary studies have shown a significant decrease (p<0.001) in tyrosinase activity in the serum of the photosensitive individuals compared to controls which is consistent with the observed red glow on the photographic prints and reprints.     

An integrated actuating and sensing system for light-addressable potentiometric sensor (LAPS) and light-actuated AC electroosmosis (LACE) operation

To develop a lab on a chip (LOC) integrated with both sensor and actuator functions, a novel two-in-one system based on optical-driven manipulation and sensing in a microfluidics setup based on a hydrogenated amorphous silicon (a-Si:H) layer on an indium tin oxide/glass is first realized. A high-intensity discharge xenon lamp functioned as the light source, a chopper functioned as the modulated illumination for a certain frequency, and a self-designed optical path projected on the digital micromirror device controlled by the digital light processing module was established as the illumination input signal with the ability of dynamic movement of projected patterns. For light-addressable potentiometric sensor (LAPS) operation, alternating current (AC)-modulated illumination with a frequency of 800 Hz can be generated by the rotation speed of the chopper for photocurrent vs bias voltage characterization. The pH sensitivity, drift coefficient, and hysteresis width of the Si₃N₄ LAPS are 52.8 mV/pH, −3.2 mV/h, and 10.5 mV, respectively, which are comparable to the results from the conventional setup. With an identical two-in-one system, direct current illumination without chopper rotation and an AC bias voltage can be provided to an a-Si:H chip with a manipulation speed of 20 μm/s for magnetic beads with a diameter of 1 μm. The collection of magnetic beads by this light-actuated AC electroosmosis (LACE) operation at a frequency of 10 kHz can be easily realized. A fully customized design of an illumination path with less decay can be suggested to obtain a high efficiency of manipulation and a high signal-to-noise ratio of sensing. With this proposed setup, a potential LOC system based on LACE and LAPS is verified with the integration of a sensor and an actuator in a microfluidics setup for future point-of-care testing applications.     

Study on stability and stabilizability of discrete-time mean-field stochastic systems

This paper is to study the mean square stabilizability and regional stability of discrete-time mean-field stochastic systems. Firstly, a necessary and sufficient condition is presented via the spectrum of linear operator to illustrate the stabilizability of discrete-time mean-field stochastic systems. B(0, γ)-stabilizability is introduced and transformed into solving linear matrix inequalities (LMIs). Secondly, B_M-stability is characterized, especially, the stabilities of circular region, sector region and annulus regions are discussed extensively. Finally, as applications, it is shown that B(0, γ₁; γ₂)-stability has close relationship with the decay rate of the system state response and the Lyapunov exponent.     

On some n-normed linear space valued difference sequences

The main aim of this article is to extend the notion of strongly Cesàro summable and strongly lacunary summable real sequences to n-normed linear space valued (n-nls valued) difference sequences. Consequently we introduce the spaces |σ₁|(X,?) and N_θ(X,?), respectively, where X is an n-normed space and ? is a difference operator. We investigate these spaces for completeness as well as for the relationship between these spaces.     

On the rôle of tube walls,and surface and space charges in electrical discharges through rarefied gases

Several matters pertaining to the part played by tube walls, and surface and space charges in electrical discharges through rarefied gases, are briefly discussed, and experiments are described which throw light on some of the processes involved in such discharges. Measurements made under identical conditions of the falls of potential between striæ in the positive columns of discharges in hydrogen at various pressures in two glass tubes of different diameters showed that for pressures above 1.1 mm. these falls were increasingly greater in the larger tube. The results of experiments done with discharges produced under unusual conditions and bearing on the radial and axial fields present in the positive columns of discharges are described, and photographs of some of the discharges are reproduced in a part of which the positive column was made to pass through a long metal tube placed inside of the glass discharge tube, the two ends of the metal tube being at times both open and at other times both closed with wire gauzes of fine mesh. The potential assumed by the metal tube and the current flowing through its walls were measured, and special experiments were done to elucidate the process by which the current manages to penetrate the more or less field-free space inside the metal cylinder. The distributions of the space and surface charges along the length of a glass discharge tube were measured separately, at least roughly, and the nature of these distributions was found to depend markedly upon whether the anode or the cathode of the discharge tube was connected to earth, although the combined effects of the two charges of necessity produced the same field distribution within the discharge tube in both cases. The gases used in the experiments were air and hydrogen.     

Interpolative coding of integer sequences supporting log-time random access

Sequences of integers are common data types, occurring either as primary data or ancillary structures. The sizes of sequences can be large, making compression an interesting option. Effective compression presupposes variable-length coding, which destroys the regular alignment of values. Yet it would often be desirable to access only a small subset of the entries, either by position (ordinal number) or by content (element value), without having to decode most of the sequence from the start. Here such a random access technique for compressed integers is described, with the special feature that no auxiliary index is needed. The solution applies a method called interpolative coding, which is one of the most efficient non-statistical codes for integers. Indexing is avoided by address calculation guaranteeing sufficient space for codes even in the worst case. The additional redundancy, compared to regular interpolative coding, is only about 1 bit per source integer for uniform distribution. The time complexity of random access is logarithmic with respect to the source size for both position-based and content-based retrieval. According to experiments, random access is faster than full decoding when the number of accessed integers is not more than approximately 0.75 · n/log₂n for sequence length n. The tests also confirm that the method is quite competitive with other approaches to random access coding, suggested in the literature.     

Embedding singular linear system with initial condition into distribution space

For inconsistent initial value problem of singular linear system, passing from classical solution to distributional solution is formulated as a process of embedding the system with initial condition into distribution space. Three technical notions, function space on R₊ with given initial value, consistent extension of the pair of the function space and input, and order exchange of the two operations of embedding and differentiating, result in a rigorous definition of distributional solution.     

Anisotropic alignments of hierarchical Li2SiO3/TiO2 @nano-C anode//LiMnPO4@nano-C cathode architectures for full-cell lithium-ion battery

We report on low-cost fabrication and high-energy density of full-cell lithium-ion battery (LIB) models. Super-hierarchical electrode architectures of Li₂SiO₃/TiO₂@nano-carbon anode (LSO.TO@nano-C) and high-voltage olivine LiMnPO₄@nano-carbon cathode (LMPO@nano-C) are designed for half- and full-system LIB-CR2032 coin cell models. On the basis of primary architecture-power-driven LIB geometrics, the structure keys including three-dimensional (3D) modeling superhierarchy, multiscale micro/nano architectures and anisotropic surface heterogeneity affect the buildup design of anode/cathode LIB electrodes. Such hierarchical electrode surface topologies enable continuous in-/out-flow rates and fast transport pathways of Li⁺-ions during charge/discharge cycles. The stacked layer configurations of pouch LIB-types lead to excellent charge/discharge rate, and energy density of 237.6 Wh kg⁻¹. As the most promising LIB-configurations, the high specific energy density of hierarchical pouch battery systems may improve energy storage for long-driving range of electric vehicles. Indeed, the anisotropic alignments of hierarchical electrode architectures in the large-scale LIBs provide proof of excellent capacity storage and outstanding durability and cyclability. The full-system LIB-CR2032 coin cell models maintain high specific capacity of ∼89.8% within a long-term life period of 2000 cycles, and average Coulombic efficiency of 99.8% at 1C rate for future configuration of LIB manufacturing and commercialization challenges.     

Magnetic losses in remanent state ferrites

Magnetic loss in remanent state ferrites¹ has generally been described through the artifice of a magnetic loss tangent (tanδ_m = μ^″?μ′). This characterization is not directly relatable to intrinsic material parameters. The results presented in this paper indicate that magnetic loss in the remanent state can be related to intrinsic material parameters by describing the ferrite mathematically by a complex “average” permeability tensor. The “average” permeability includes the effects of magnetocrystalline anistropy, remanent magnetization, linewidth and an average demagnetizing field appropriate to the distribution of magnetic domains. Experimental examples are given showing that excellent agreement is obtained between theoretically predicted and measured losses.     

Light-addressable electrodeposition of cell-encapsulated alginate hydrogels for a cellular microarray using a digital micromirror device

This paper describes a light-addressable electrolytic system used to perform an electrodeposition of calcium alginate hydrogels using a digital micromirror device (DMD). In this system, a patterned light illumination is projected onto a photoconductive substrate serving as a photo-anode to electrolytically produce protons, which can lead to a decreased pH gradient. The low pH generated at the anode can locally release calcium ions from insoluble calcium carbonate (CaCO₃) to cause gelation of calcium alginate through sol-gel transition. By controlling the illumination pattern on the DMD, a light-addressable electrodeposition of calcium alginate hydrogels with different shapes and sizes, as well as multiplexed micropatterning was performed. The effects of the concentration of the alginate and CaCO₃ solutions on the dimensional resolution of alginate hydrogel formation were experimentally examined. A 3 × 3 array of cell-encapsulated alginate hydrogels was also successfully demonstrated through light-addressable electrodeposition. Our proposed method provides a programmable method for the spatiotemporally controllable assembly of cell populations into cellular microarrays and could have a wide range of biological applications in cell-based biosensing, toxicology, and drug discovery.     

A novel dropout mechanism with label extension schema toward text emotion classification

Researchers have been aware that emotion is not one-hot encoded in emotion-relevant classification tasks, and multiple emotions can coexist in a given sentence. Recently, several works have focused on leveraging a distribution label or a grayscale label of emotions in the classification model, which can enhance the one-hot label with additional information, such as the intensity of other emotions and the correlation between emotions. Such an approach has been proven effective in alleviating the overfitting problem and improving the model robustness by introducing a distribution learning component in the objective function. However, the effect of distribution learning cannot be fully unfolded as it can reduce the model’s discriminative ability within similar emotion categories. For example, “Sad” and “Fear” are both negative emotions. To address such a problem, we proposed a novel emotion extension scheme in the prior work (Li, Chen, Xie, Li, and Tao, 2021). The prior work incorporated fine-grained emotion concepts to build an extended label space, where a mapping function between coarse-grained emotion categories and fine-grained emotion concepts was identified. For example, sentences labeled “Joy” can convey various emotions such as enjoy, free, and leisure. The model can further benefit from the extended space by extracting dependency within fine-grained emotions when yielding predictions in the original label space. The prior work has shown that it is more apt to apply distribution learning in the extended label space than in the original space. A novel sparse connection method, i.e., Leaky Dropout, is proposed in this paper to refine the dependency-extraction step, which further improves the classification performance. In addition to the multiclass emotion classification task, we extensively experimented on sentiment analysis and multilabel emotion prediction tasks to investigate the effectiveness and generality of the label extension schema.     

Secondary electron emission from oxide-coated cathodes

The secondary electron emission from alkaline-earth oxide-coated cathodes has been investigated under both continuous and pulsed bombardment. Various factors affecting the yield, such as dependence upon primary voltage, collecting voltage, temperature, time, and angle of incidence, are noted, and the present state of the theory is discussed.Experiments have been performed with three types of apparatus. Yield vs. Energy data reveal values of δ of 4–7 at room temperature, with a more or less flat maximum at approximately 1,000 volts primary energy.The yield increases with temperature in an exponential manner, and plots of log Δδ (i.e. δ_K° ? δ_300°K) vs. 1/T give straight lines. Values of Q₁ between 0.9 – 1.5 eV. are generally indicated, and from extrapolation of these curves, yields exceeding 100 at 850° C. are deduced. The secondary emission depends upon the degree of activation, and increases with enhancement of the thermionic emission characteristics. Short-time effects such as growth or decay of secondary current after the onset of primary bombardment or persistence after the cessation of bombardment have not been observed, and values of yield obtained by pulsed methods are in accord with those obtained under D.C. conditions. Tail phenomena reported by J. B. Johnson and interpreted as “enhanced thermionic emission” from oxidecoated cathodes become manifest only under experimental conditions characterized by certain space-charge effects, and have been effectively simulated by bombarding a tantalum target adjacent to an electron-emitting tungsten filament. Various measurements of the energy distribution of secondary electrons as a function of primary voltage and temperature have been obtained. It was observed that the average energy of the secondary electrons decreases with temperature at a rate which more than compensates for the increase in the number of secondaries emitted per incident primary. The mechanism of the observed dependence of yield upon temperature is not well understood. Various alternative explanations are discussed and, in the light of the present state of our knowledge, regarded as untenable.     

A Markovian system approach to distributed H∞ filtering for sensor networks with stochastic sampling

This paper is concerned with the distributed H_∞ filtering problem for a class of sensor networks with stochastic sampling. System measurements are collected through a sensor network stochastically and the phenomena such as random measurement missing and quantization are also considered. Firstly, the stochastic sampling process of the sensor network is modeled as a discrete-time Markovian system. Then, the logarithmic quantization effect is transformed into the parameter uncertainty of the filtering system, and a set of binary variables is introduced to model the random measurement missing phenomenon. Finally, the resulting augmented system is modeled as an uncertain Markovian system with multiple random variables. Based on the Lyapunov stability theory and the stochastic system analysis method, a sufficient condition is obtained such that the augmented system is stochastically stable and achieves an average H_∞ performance level γ; the design procedure of the optimal distributed filter is also provided. A numerical example is given to demonstrate the effectiveness of the proposed results.     

中国二氧化碳排放的分布动态与演进趋势

研究二氧化碳排放的动态分布特征及其演进规律对于制定合理的碳减排政策并最终实现碳减排目标具有重要理论意义和参考价值.本文采用IPCC的计算方法,以中国大陆29个省(区、直辖市)1995-2010年期间不同年份的化石能源消费量精确测算了各省的二氧化碳排放量,并以碳强度为指标,采用动态分布分析方法(MEDD)对中国省际和区域二氧化碳排放的分布动态及其演进进行了实证分析.研究结论显示: ① GIS可视化方法表明中国二氧化碳排放存在显著的空间非均衡性;②基尼系数测算结果表明,在样本考察期内中国二氧化碳排放空间分布的总体差距呈现扩大趋势.其中,中西部地区均呈现扩大趋势,只有东部地区呈现下降趋势;③Kernel密度估计表明,中国二氧化碳排放的地区差距在样本考察期内呈下降态势,三大区域也均呈下降态势;④Markov链分析表明,不同水平的碳强度的组间流动性较低,表明中国碳排放具有一定的稳定性.整体来看,中国碳排放有下降趋势,整体向着低和中低水平的趋势发展.     

Central suboptimal H∞ filtering for nonlinear polynomial systems with multiplicative noise

This paper presents the central finite-dimensional H_∞ filter for nonlinear polynomial systems with multiplicative noise, that is suboptimal for a given threshold γ with respect to a modified Bolza-Meyer quadratic criterion including the attenuation control term with the opposite sign. In contrast to the previously obtained results, the paper reduces the original H_∞ filtering problem to the corresponding optimal H₂ filtering problem, using the technique proposed in [1]. The paper presents the central suboptimal H_∞ filter for the general case of nonlinear polynomial systems with multiplicative noise, based on the optimal H₂ filter given in [31]. The central suboptimal H_∞ filter is also derived in a closed finite-dimensional form for third (and less) degree polynomial system states. Numerical simulations are conducted to verify performance of the designed central suboptimal filter for nonlinear polynomial systems against the central suboptimal H_∞ filters available for polynomial systems with state-independent noise and the corresponding linearized system.     

Periodic solutions for a fourth-order p-Laplacian neutral functional differential equation

By means of Mawhin's continuation theorem, we study a kind of fourth-order p-Laplacian neutral functional differential equation with a deviating argument in the form:

(φ_p(x(t)−cx(t−δ))^″)^″=f(x(t))x^′(t)+g(t,x(t−τ(t,|x|_∞)))+e(t).     

A high-capacity cathode for rechargeable K-metal battery based on reversible superoxide-peroxide conversion

As a promising low-cost energy storage device, the development of a rechargeable potassium-ion battery (KIB) is severely hindered by the limited capacity of cathode candidates. Regarded as an attractive capacity-boosting strategy, triggering the O-related anionic redox activity has not been achieved within a sealed KIB system. Herein, in contrast to the typical gaseous open K-O₂ battery (O₂/KO₂ redox), we originally realize the reversible superoxide/peroxide (KO₂/K₂O₂) interconversion on a KO₂-based cathode. Controlled within a sealed cell environment, the irreversible O₂ evolution and electrolyte decomposition (induced by superoxide anion (O₂⁻) formation) are effectively restrained. Rationally controlling the reversible depth-of-charge at 300 mAh/g (based on the mass of KO₂), no obvious cell degradation can be observed during 900 cycles. Moreover, benefitting from electrolyte modification, the KO₂-based cathode is coupled with a limited amount of K-metal anode (merely 2.5 times excess), harvesting a K-metal full-cell with high energy efficiency (∼90%) and long-term cycling stability (over 300 cycles).