Influences affecting the soil-water characteristic curve

INTRODUCTION The soil-water characteristic curve (SWCC) gives the relationship between the amount of water in the soil (i.e. gravimetric or volumetric water content) and soil suction (i.e. matric suction at low suction and total suction at high suction). Many properties of a partially saturated soil such as the coefficient of permeability, shear strength and volume strain, pore size distribution, the amount of water contained in the pores at any suction, can be obtained from the SWCC. …

Influences affecting the soil-water characteristic curve

The soil-water characteristic curve (SWCC) is the primary partially saturated soil information as its behavior and properties can be derived from it. Although there have been many studies of unsaturated soils and the SWCC, there is still no combined constitutive model that can simulate soil characteristics accurately. In cases when hydraulic hysteresis is dominant (e.g.under cyclic loading) it is particularly important to use the SWCC. In the past decades, several mathematical expressions have been proposed to model the curve. There are various influences on the SWCC as a source of information, so the curves obtained from conventional tests often cannot be directly applied;and the mathematical expressions from one scenario cannot be used to simulate another situation. The effects of void ratio, initial water content, stress state and high suction were studied in this work revealing that water content and stress state are more important than the other effects;but that the influences tend to decrease when suction increases. The van Genuchten model was modified to simulate better the changes in the degree of saturation at low values of suction. Predictions were compared with experimental results to determine the simulation capability of the model.