Instructional design and technology grounded in enactivism: A paradigm shift?

Although traditional instructional design and technology (IDT) has largely been based on objectivism, in the past 20 years, constructivism has emerged as a dominant framework for IDT. Both perspectives, however, present shortcomings. This paper explores enactivism—an emerging new philosophical world view—as an alternative paradigm. It also investigates the possibilities offered by this new paradigm to IDT. The philosophical world view known as enactivism is reviewed to illustrate the similarities and differences among the three philosophical paradigms, namely, objectivism, constructivism and enactivism. Finally, details of enactivism and its implications for IDT are explored.     

Instructional design and project management: complementary or divergent?

This paper reports the results of a study to identify the extent to which organizations that develop educational/training products are committed to project management, as measured by their project management implementation maturity, as a methodology that is separate and distinct from the processes of instructional design. A Web survey was conducted among 103 public and private sector organizations worldwide that develop educational/training products. Results show no significant difference by project management maturity level in the roles of instructional designer and project manager, although there is some relationship between maturity level and how organizations perceive the skills/competencies of project managers versus those of instructional designers. Further, organizational decision-makers have very specific expectations about the formal education and training of educational/training product development project leaders. The findings should be of value to institutions of higher education in evaluating programs that prepare students for careers in instructional design.     

To Spin or Not to Spin?

The alarm has just gone off. Do I really have to get up? I wonder. Originally, signing up for an early-morning spinning class seemed like a good idea; it jump-starts the day with some well-needed exercise.     

What works to improve the quality of student learning in developing countries?

We conducted a systematic review to identify policy interventions that improve education quality and student learning in developing countries. Relying on a theory of change typology, we highlight three main drivers of change of education quality: (1) supply-side capability interventions that operate through the provision of physical and human resources, and learning materials; (2) policies that through incentives seek to influence behaviour and intertemporal preferences of teachers, households, and students; (3) bottom-up and top-down participatory and community management interventions, which operate through decentralisation reforms, knowledge diffusion, and increased community participation in the management of education systems. Overall, our findings suggest that interventions are more effective at improving student performance and learning when social norms and intertemporal choices are factored in the design of education policies, and when two or more drivers of change are combined. Thus, supply-side interventions alone are less effective than when complemented by community participation or incentives that shift preferences and behaviours.     

Learner managed learning: managing to learn or learning to manage?

A central assumption behind innovations in education and training over the last 20 years has been that learners need to take greater responsibility for the direction and pace of their own learning. The rationale for this is provided by an analysis of the contemporary social and economic order which highlights instability and change as core conditions. A discourse of ‘learner-management’ has emerged, linked with techniques of personal development planning and recording achievement, which appears to offer learners the possibility for individual autonomy and control. The article examines some of the assumptions embedded in this discourse, questioning the relevance of the rational decision making model, and the origins of the ‘character’ of the self-managing learner. ‘Learner management’ is viewed as a discursive form of power, shaping subjective understandings of what it means to be a learner, a manager, a person. It is suggested that this is not the only discourse of learner management available, and that education has a role to play in mapping more creative and diverse forms of learner identity.     

Understanding students’ learning practices: challenges for design and integration of mobile technology into distance education

This study explores the design requirements for mobile applications for second language learning in online/distance higher education settings. We investigate how students use technology and how they perceive that these technologies-in-practice facilitate their language learning. Structuration Theory is used for the analysis. Results show that design needs to consider that (i) students use their private mobile technologies frequently when conducting self-initiated learning tasks, (ii) students’ mobile technologies-in-practice are important, and course designers should design materials and tools for such use practices, and (iii) students prefer to work on their own due to the limited time they want to devote to their learning. Consequently, in regard to the pervasive nature of mobile technology integration in society and into students’ habitual use, they need various software tools on such devices to support individual learning.     

Improving teachers’ skills to integrate the microcontroller technology in computer engineering education

Education and Information Technologies - Currently, the study of microcontroller and microcircuits by students is becoming very important and in demand when acquiring competencies in the computer...     

Active and passive technology integration: a novel approach for managing technology’s influence on learning experiences in context-aware learning spaces

Technology integration is the process of overcoming different barriers that hinder efficient utilisation of learning technologies. The authors divide technology integration into two components based on technology’s role in the integration process. In active integration, the technology integrates learning resources into a learning space, making it adaptive to the changes in the context. In passive integration, the technology is integrated into a learning space so that it does not disturb the learner and the context. Using this division, the authors investigate technology integration in context-aware learning spaces (CALSs), which emphasise context-sensitiveness and utilise surrounding resources. UFractions is a CALS combining a mobile-based story and fraction rods. The authors analyse active and passive integration in UFractions among 305 middle schools pupils in South Africa, Finland and Mozambique. In the analysis the authors support quantitative questionnaire data with qualitative insights from questionnaires, interviews and observations. The findings indicate that technology integration, particularly active integration, in UFractions is incomplete. The concepts of active and passive integration are necessary in order to manage technology’s influence on learning experiences in CALSs. Active and passive integration can also be helpful in CALS design, deployment and evaluation, and they could be applied in other learning technology scenarios in the future.     

To trust or not to trust?—teacher marking versus external marking of national tests

In the Swedish educational system, teachers have the dual responsibility of assigning final grades and marking their own students’ national tests. The Government has mandated the Swedish Schools Inspectorate to remark samples of the national tests to see if teacher marking can be trusted. Reports from this project have concluded that intermarker consistency is low and that teachers’ markings are generous as compared to those of the external markers. These findings have been heavily publicized, leading to distrust in teachers’ assessments. In the article, we analyze and discuss the remarking studies from methodological as well as substantive angles. We conclude that the design applied in the reanalysis does not allow inferences about bias in marking across schools or teachers. We also conclude that there are several alternative explanations for the observation that teacher marks are higher than the external marks: The external markers did not form a representative sample, they read copies with sometimes marginal legibility, and they used a different scale for marking than the teachers had used. The results are thus not as clearcut as suggested by the reports and media releases, which is because a school inspections logic rather than a research logic was applied in designing, conducting, and reporting the studies.     

Using technology supported learning to develop active learning in higher education： A case study

John Dewey believed that the education should educate individuals ＂not as passive recipients of educational content, but as active makers of meaning, capable of exercising independent judgement and of democratic collaboration＂ （Gregory, 2001, p. 399）. With this philosophical viewpoint, the author strongly believes that teachers should engage students in becoming actively involved and responsible for their own learning. One way in which to get students involved in their own learning is by using technology supported learning. This method is important in relation to the diverse student population now enrolling in universities. This case study was carried out to assess the implementation of technology supported learning within a first year module. Three online tasks were made available for students within this course. A questionnaire was used to solicit information on the online task. The findings suggested that there are many benefits that can be derived from the effective utilization of technology within higher education.     

To see or not to see? Comparing the effectiveness of examinations and end of module assessments in online distance learning

Research comparing continuous assessment (e.g. coursework) with examinations generally reveals a student preference for the former. The perceived increased use of continuous assessment periodically captures media attention, with claims of greater numbers of higher degree classifications being awarded. This paper takes a case-study approach to investigate the extent to which different types of assessment allow students to effectively demonstrate and apply their learning. By considering data gathered from second-level, undergraduate students completing 60 point, online psychology modules, this paper investigates assessment effectiveness in terms of student satisfaction, pass rate and level of pass rate. Findings reveal that modules with an end of module assessment (EMA), rather than an examination, have higher completion and pass rates. Whilst students who took a seen examination also performed well, those who completed an unseen examination recorded the lowest overall pass and completion rates, despite high ratings of student satisfaction. Findings are discussed in terms of implications for improved pedagogy and student experience.     

Learning to teach 3D printing in schools: how do teachers in Korea prepare to integrate 3D printing technology into classrooms?

3D printing implementation in educational contexts has gained considerable attention in recent years. However, research shows that both in-service and pre-service teachers lack digital literacy and the confidence required to teach this emerging technology. This study reports the current challenges and opportunities in 3D printing education in Korea and identifies the range of knowledge required for teachers to integrate 3D printing technology into classrooms in meaningful ways. The technological, pedagogical, and content knowledge (TPACK) framework was used to analyze the certificate program for 3D printing educators and in-service teachers’ practices. The findings from interviews with 10 in-service teachers and participant observation in the 3D printing training workshop for pre-service teachers revealed that technological knowledge is overly emphasized in the 3D printing teacher training curriculum. Thus, many in-service teachers develop their content knowledge and pedagogical knowledge by exchanging ideas with other teachers online and running project-based courses with flipped classroom approaches. Two potential paths were discovered for developing curricula that cross over the domains of the TPACK framework to successfully integrate the technology into classrooms: collaboration between teachers in different subject areas and industry experts to develop technical knowledge and curriculum, and contextualizing 3D printing technology in relation to open-source digital culture.     

Is there creativity in design? From a perspective of school design and technology in Hong Kong

As creativity is likely to become a crucial aspect of living in the future, it is important for educators to teach students to think creatively when solving constantly evolving and increasingly complex problems. Supported by the idea that creativity can be taught and learnt, elements of creativity are now embedded in secondary school education. Among all school subjects, design and technology (D&T) is one of the best examples for fostering and cultivating students?? creativity, as the subject offers creative activities that enable students to realize their ideas in the context of the real world. This paper analyzes the creative elements in the D&T curriculum in Hong Kong as seen in the exemplar projects on the Education Bureau website. Some problems and difficulties encountered in fostering creativity in the context of Hong Kong are identified, based on the current teaching environment. The paper also draws attention to East Asian beliefs and implicit theories, which greatly influence teachers?? underlying assumptions about learning and teaching, and at the same time notes that these beliefs may be detrimental to the development of creativity among students. The paper then identifies the problems and inadequacies in fostering creativity in design at the secondary school level and expects to raise awareness of the importance of creativity in D&T.     

The value simulation‐based learning added to machining technology in Singapore

This study seeks to understand the value simulation‐based learning (SBL) added to the learning of Machining Technology in a 15‐week core subject course offered to university students. The research questions were: (1) How did SBL enhance classroom learning? (2) How did SBL help participants in their test? (3) How did SBL prepare participants for workshop practice? The findings suggest that SBL enlivened the learning of Machining Technology, and promoted autonomous and mastery learning. SBL made a deep impression on the participants’ visual experience, helping them remember the machine processes. SBL also helped learners to conceptualize their answers and provided them with opportunities to become familiar with the conventional machines before workshop practice. An infusion of SBL has the potential to add value to the learning of Machining Technology.     

How should the higher education workforce adapt to advancements in technology for teaching and learning?

In a time of change, higher education is in the position of having to adapt to external conditions created by widespread adoption of popular technologies such as social media, social networking services and mobile devices. For faculty members, there must be opportunities for concrete experiences capable of generating a personal conviction that a given technology is worth using and an understanding of the contexts in which it is best used. The paper examines approaches to educational professional development at The Open University, including recent initiatives related to faculty development in relation to mobile learning. The paper reflects on what can be learnt from these experiences and proposes a lifelong learning perspective which can help the higher education workforce to adapt. Faculty members have to commit to lifelong learning, remembering that ‘professional role model’ to students is one of the main roles of the teacher.     

Feeling good,learning better? Effectivity of an emotional design procedure in multimedia learning

Emotional designing describes the elicitation of positive affect during learning through specific design elements of the learning environment to enhance learning. This experimental study examined the effectivity of an emotional design procedure on learning performance. Moreover, the learner’s affective states before learning were taken into consideration as possible moderators. 145 university students learned for 20?min either in a multimedia positive affect inducing learning environment (n?=?85) or a neutral multimedia learning environment (n?=?60). The Affect was measured before, during, and after learning. Performance was tested afterwards. To control for possible confounding effects, achievement motivation, emotion regulation, and situational interest were measured. In contrast to earlier findings, no superiority effect of the emotional design procedure was found. Furthermore, the effectivity of the emotional design procedure was not moderated by student’s prior effective states. However, there was a main influence of student’s positive affect on transfer performance.     

Preparing beginning teachers for technology integration in education: ready for take-off?

The overall aims of this study are to explore (1) how beginning teachers integrate technology in their practice and (2) the connections between teachers’ technology uses and their pre-service education programmes. Data of this follow-up study were collected through in-depth interviews with beginning teachers. The results reveal that all beginning teachers used a wide range of technological applications, mainly for structured learning approaches, while few created opportunities for student-centred technology use. Further, pre-service learning experiences that impact graduate teachers’ technology use are identified. While teacher educators modelling technology use are an important motivator for beginning teachers to use technology in their own teaching, field experiences seem to be the most critical factor influencing their current practice. Based on the results of this study, recommendations about how to prepare and support pre-service and beginning teachers for technology integration are discussed.     

Subitizing or counting as possible screening variables for learning disabilities in mathematics education or learning?

This paper aims to highlight the significance of a particular aspect of magnitude processing, namely counting and subitizing or the rapid enumeration of small sets of items, for learning. Emphasis is laid on the historical roots and the conceptual framework as well as on studies on pre-verbal and school-age children. Evidence of the potential value of this research for the assessment of children at risk of mathematical learning disabilities, is presented. Inherent to its nature, subitizing relies on rapid, preverbal analogue magnitude comparisons being triggered. We will highlight the differences with counting, and the implications of shortcomings in counting and subitizing in children with mathematical learning disabilities for the automaticity of number magnitude processing. Furthermore we especially look in this paper at the varying assessment paradigms which are used in research with different age groups, something which has received insufficient attention in the past. Finally, we outline the challenges for future research on mathematical learning disabilities.