Input-output finite-time stability for networked control systems with memory event-triggered scheme

This paper has investigated the input-output finite time stability (IO-FTS) for a class of networked control systems (NCSs) with network-induced delay. To reduce the frequents of packets transmission, a novel memory event-triggered scheme (METS) has been proposed. Different from existing event-triggered schemes, the proposed METS can make use of certain released packets to generate new event. By this way, the event generator can do more precise decision and better control performance can be expected. By using a Lyapunov functional method, sufficient condition for the IO-FTS of NCSs has been derived. Then a co-design method is proposed to obtain the memory feedback gains and parameters of the METS. Finally, a simulation example is carried out and the effectiveness of the designed METS is validated. The IO-FTS of NCSs with solved memory feedback gains is also confirmed.     

Security-based resilient event-triggered control of networked control systems under denial of service attacks

This paper is concerned with the security control problem of the networked control system (NCSs) subjected to denial of service (DoS) attacks. In order to guarantee the security performance, this paper treats the influence of packet dropouts due to DoS attacks as a uncertainty of triggering condition. Firstly, a novel resilient triggering strategy by considering the uncertainty of triggering condition caused by DoS attacks is proposed. Secondly, the event-based security controller under the resilient triggering strategy is designed while the DoS-based security performance is preserved. At last, the simulation results show that the proposed resilient triggering strategy is resilient to DoS attacks while guaranteing the security performance.     

Quantized control of event-triggered networked systems with time-varying delays

The paper is a study of quantized control for stochastic Markov jump systems with interval time-varying delays and bounded system noise under event-triggered mechanism. A new scheme of Lyapunov–Krasovskii functional which contains the quadratic terms and integral terms is presented. Then quadratic convex technology, the theory of stochastic switching system, and logarithmic quantizer are applied to this paper. The design of quantized controller is obtained with those methodologies. Different from previous results, our derivation applies the idea of second-order convex combination. The conservatism of stability criteria for systems is reduced by using this method. A numerical example under different conditions is given to demonstrate the effectiveness and validity of the new design techniques.     

Novel event-triggered filter design for nonlinear networked control systems

This paper investigates the problem of event-triggered filter design for nonlinear networked control systems (NCSs) in the framework of interval type-2 (IT2) fuzzy systems. A novel IT2 fuzzy filter for ensuring asymptotic stability and H_∞ performance of filtering error system is proposed, where the premise variables are different from those of the fuzzy model. Attention is focused on solving the problem of event-triggered filter design subject to parameter uncertainties, data quantization, and communication delay in a unified frame. It is shown that the proposed event-triggered filter design communication mechanism for IT2 fuzzy NCSs has the advantage of the existing event-triggered approaches to reduce the utilization of limited network resources and provides flexibility in balancing the tracking error and the utilization of network resources. Finally, simulation example is given to validate the advantages of the presented results.     

Improved approaches on adaptive event-triggered output feedback control of networked control systems

This paper studies the static output-feedback control in a class of networked control systems. Different from the existing results, the transmission of control signals is based on a novel adaptive event-triggered scheme, where the adaptive thresholds depend on the dynamic error of the system rather than predetermined constants as the traditional ones. The amount of the releasing data is regulated by the adaptive thresholds that play an essential role in decision of whether releasing the sampled data or not. Through fully using the information on network-induced delay and introducing two adjusting parameters, an augmented Lyapunov–Krasovskii (L–K) functional is constructed. Especially, some novel Wirtinger-based integral inequalities are utilized to reconsider those previously ignored information, which can help reduce the conservatism. Furthermore, a novel constructive method is developed to obtain the controller gain by solving the achieved linear matrix inequalities (LMIs). Finally, three numerical examples are given to illustrate the efficiency of the presented results.     

Networked load frequency control of multi-area uncertain power systems via adaptive event-triggered communication scheme

Load frequency control of power systems is a very important approach to keep stability and security. Unfortunately, the traditional load frequency control is not effective because of the introduction of communication networks in multi-area power systems. In order to overcome this difficulty, sampling-based load frequency control for multi-area power systems is studied via an event-triggered detector. Unlike published works, an adaptive law for event-triggered scheme is given. Since multi-area power systems with event-triggered scheme are hybrid systems, there are a lot of challenges for analysing load frequency control problem. Some lemmas and a new Lyapunov function are developed to overcome these challenges. The obtained stability and stabilization criteria can provide a tradeoff to balance the required communication resources and the desired control performance. Numerical examples verify effectiveness of the obtained results.     

Robust packet-based nonlinear fuzzy networked control systems

A class of networked nonlinear control systems with norm-bounded uncertainties is presented in this paper. The class is represented by Takagi–Sugeno (T-S) fuzzy models with packet processing. The network loop delay is considered either as known delay or random delay. For the former case, we develop conditions that guarantee the robust asymptotic stability and state-feedback stabilization with strict dissipativity and cast the results in linear matrix inequality (LMI) framework. Next employing a probabilistic-based delay partitioning method to deal with random delay, we establish novel LMI criteria for strict dissipative stability analysis and feedback synthesis. The efficacy of the ensuing techniques is demonstrated by numerical solution of typical examples and Mont Carlo simulation.     

Distributed impulsive control for heterogeneous multi-agent systems based on event-triggered scheme

In this paper, the distributed impulsive control for heterogeneous multi-agent systems based on event-triggered approach is investigated. According to whether the information transfer of the dynamic compensator is continuous or not, two different kinds of impulsive controllers are designed, respectively. Based on these two kinds of controllers, the corresponding distributed event-triggered conditions are provided, which make the impulsive instants of all agents do not need occur simultaneously. Moreover, the lower bound of impulsive intervals can also be guaranteed for all the event-triggered conditions, which means that the control schemes given in this paper can avoid the Zeno-behavior successfully. Eventually, a simulation example is proposed to support the effectiveness of the results obtained in this paper.     

Resilient event-triggered consensus control for nonlinear muti-agent systems with DoS attacks

The distributed event-triggered secure consensus control is discussed for multi-agent systems (MASs) subject to DoS attacks and controller gain variation. In order to reduce unnecessary network traffic in communication channel, a resilient distributed event-triggered scheme is adopted at each agent to decide whether the sampled signal should be transmitted or not. The event-triggered scheme in this paper can be applicable to MASs under denial-of-service (DoS) attacks. We assume the information of DoS attacks, such as the attack period and the consecutive attack duration, can be detected. Under the introduced communication scheme and the occurrence of DoS attacks, a new sufficient condition is achieved which can guarantee the security consensus performance of the established system model. Moreover, the explicit expressions of the triggering matrices and the controller gain are presented. Finally, simulation results are provided to verify the effectiveness of the obtained theoretical results.     

Subspace predictive control with the data-driven event-triggered law for linear time-invariant systems

In this paper, a subspace predictive control (SPC) method with a novel data-driven event-triggered law is proposed for linear time-invariant systems with unknown model parameters. Based on the conventional SPC method, the event-triggered law is introduced to substitute the typical receding horizon optimization, which reduces the data computation load of the traditional SPC method. The key parameters of the event-triggered law are derived by the Q-learning method via system data and the input-to-state stability of the system can be ensured with the designed event-triggered law. The simulation results illustrate the effect and merits of the proposed method with comparisons.     

Event-triggered fault estimation and sliding mode fault-tolerant control for a class of nonlinear networked control systems

This paper is concerned with integrated event-triggered fault estimation (FE) and sliding mode fault-tolerant control (FTC) for a class of discrete-time Lipschtiz nonlinear networked control systems (NCSs) subject to actuator fault and disturbance. First, an event-triggered fault/state observer is designed to estimate the system state and actuator fault simultaneously. And then, a discrete-time sliding surface is constructed in state-estimation space. By the use of a reformulated Lipschitz property and delay system analysis method, the sliding mode dynamics and state/fault error dynamics are converted into a unified linear parameter varying (LPV) networked system model by taking into account the event-triggered scheme, actuator fault, external disturbance and network-induced delay. Based on this model and with the aid of Lyapunov–Krasovskii functional method, a delay-dependent sufficient condition is derived to guarantee the stability of the resulting closed-loop system with prescribed H_∞ performance. Furthermore, an observed-based sliding mode FTC law is synthesized to make sure the reachability of the sliding surface. Finally, simulation results are conducted to verify the effectiveness of the proposed method.     

An improved memory-event-triggered control for networked control systems

In this paper, the H_∞ control problem is investigated for a class of networked control systems with network-induced delay. A memory event-triggered scheme (METS) is proposed to reduce the redundant packet transmission in the network channel. Different from the normal event-triggered scheme (ETS), some recent released packets are stored at the event generator and controller sides, which are utilized for the first time to generate the triggered events and design the memory-based controller. The proposed METS has the following two merits. (1) The information of certain recent released signals are first utilized, which helps to improve the triggering instants at the crest or trough of the responses. (2) A state-dependent time-varying threshold parameter is designed, which can adjust the packet transmission rate according to the information of the state. Based on the proposed METS, a memory event-triggered controller is designed, the controller feedback gains and triggering parameters can be co-designed by solving a set of linear matrix inequalities. Finally, an example is given to illustrate the effectiveness of the proposed method.     

Event-triggered nonlinear filtering for networked systems with correlated noises

This paper focuses on the filtering problem for nonlinear networked systems with event-triggered data transmission and correlated noises. An event-triggered data transmission mechanism is introduced to reduce excessive measurements transmitted over a bandwidth-constrained network. Considering that process noise and measurement noise are one-step cross-correlated, an UKF-based filtering algorithm which depends on correlation parameter and trigger threshold is presented. Then sufficient conditions are established to ensure stability of the designed filter, where a critical value of the correlation parameter exists. Finally, the effectiveness of the proposed filtering algorithm is demonstrated by comparative simulations.     

A novel event-triggered mechanism for networked cascade control system with stochastic nonlinearities and actuator failures

This paper deals with the event-triggered control for networked cascade control systems. Unlike conventional event-triggered schemes that predetermine a fixed threshold to reduce the data-releasing rate, this paper proposes a novel event-triggered mechanism (ETM) in an adaptive way. Under this ETM, it has the following merits: (1) the data-releasing rate remains at a lower level so as to save limited network bandwidth; (2) the reliability of control systems can be improved since the threshold of ETM is increased gradually with the elapse of time till the next event is generated. An integrated model of networked cascade control systems with consideration of stochastic nonlinearity, actuator failures and ETM is established. Sufficient conditions are obtained to ensure the mean-square stability and stabilization of networked cascade control systems. Finally, two examples are exploited to show the effectiveness of the proposed method.     

Event-triggered fault estimation and fault-tolerant control for networked control systems

This paper is concerned with the event-triggered fault estimation and fault-tolerant control for continuous-time dynamic systems subject to system fault and external disturbance under network environment. Firstly, based on the event-triggered sampling, a fault diagnosis observer is constructed to estimate both the system state and the system fault simultaneously, and a multi-objective constraint is established to guarantee the estimation accuracy. Based on the estimated system state and fault signal, a fault-tolerant controller is proposed to compensate the influence of occurred faults and maintain the system performance. The event-triggered scheme and the fault-tolerant controller are co-designed to guarantee the required performance of faulty system and reduce the consumption of communication resources. Finally, simulation results of an F-404 aircraft engine system are provided to demonstrate the effectiveness of the proposed method.     

Distributed event-triggered control co-design for large-scale systems via static output feedback

This work investigates the problem of distributed control for large-scale systems, in which a communication network is available to exchange information. To avoid the unnecessary communication, an event-triggered control (ETC) mechanism is introduced, in which the transmission occurs only when a certain event is triggered. Under the assumption that only the output signal is available, the static output feedback (SOF) is considered in this work. The aim of the co-design is to design an SOF controller and an ETC condition simultaneously such that the overall closed-loop system is stabilized with a certain level of performance. To this end, an event-triggering scheme based on output signals is proposed to determine when the event is triggered. Then the closed-loop system is modeled as a linear perturbed system. The distributed control co-design is formulated as a convex optimization problem with linear matrix inequalities (LMIs) constraints. Finally, a numerical example is presented to show the effectiveness of the proposed design method.     

Distributed adaptive event-triggered protocol for tracking control of leader-following multi-agent systems

A novel adaptive event-triggered control protocol is developed to investigate the tracking control problem of multi-agent systems with general linear dynamics. By introducing the event-triggered control strategy, each agent can decide when to transfer its state to its neighbors at its own triggering instants, which can greatly reduce communication burden of agents. It is shown that the “Zeno phenomenon” does not occur by verifying that there exists a positive lower bound on the inter-event time intervals of agents under the proposed adaptive event-triggered control algorithm. Finally, an example is provided to testify the effectiveness of the obtained theoretical results.     

Optimal tracking performance for networked control systems with quantization

This paper investigates the optimal tracking performance of the multiple-input multiple-output (MIMO) discrete-time networked control systems (NCSs) considering the quantization of communication channel. The tracking performance is adopted for the H₂ square error criterion. The optimal tracking performance expression is obtained by using the co-prime factorization, the partial factorization, the inner–outer factorization and the spectral decomposition methods. Moreover, the paper also includes the exploration of the optimal tracking performance with input power constraint. The obtained results have demonstrated that the optimal tracking performance is influenced by the non-minimum phase zeros, unstable poles and their directions, the reference signal and the quantization interval. Moreover the theoretical results have also been proven using a number of different examples.     

Improving the performance of networked control systems with time delay and data dropouts based on fuzzy model predictive control

This paper proposes a fuzzy model predictive control (FMPC) combined with the modified Smith predictor for networked control systems (NCSs). The network delays and data dropouts are problems, which greatly reduce the controller performance. For the proposed controller, the model of the controlled system is identified on-line using the Takagi – Sugeno (T-S) fuzzy models based on the Lyapunov function. There are two internal loops in the proposed structure. The first is the loop around the FMPC, which predicts the future outputs. The other is the loop around the plant to give the error between the system model and the actual plant. The proposed controller is designed for controlling a DC servo system through a wireless network to improve the system response. The practical results based on MATLAB/SIMULINK are established. The practical results are indicated that the proposed controller is able to respond the networked time delay and data dropouts compared to other controllers.