External work and peak power are reliable measures of ergometer grinding performance when tested under load,deck heel,and grinding direction conditions

The reliability of grinding performance was assessed in 18 current Emirates Team New Zealand America's Cup sailors in two test sessions separated by 5 h using a custom-built ergometer. Sixteen different grinding conditions that varied by load (Light 39 N·m, Moderate 48 N·m, Heavy 68 N·m), deck heel (Flat 0° control, Downhill 25°, Uphill 25°, Right 25°, Left 25°), and grinding direction (forwards, backwards) were assessed using peak power and external work over 5 s during maximal-effort 8-s grinds. Reliability statistics included the difference in mean (M_diff), standard error of measurement (SEM), and intraclass correlation coefficients (ICC). External work (SEM = 1.6–6.9%; ICC = 0.91–0.99) was a more consistent performance measure than peak power (SEM = 1.3–9.6%; ICC = 0.84–0.99) across all test conditions. Testing under different load conditions resulted in external work SEMs of 1.6–3.9% with performance more reliable in lighter load conditions. Grinding performance during different heel conditions was less reliable (external work SEMs = 4.6–6.9%). Grinding direction (forward or backward) did not appear to affect performance reliability, although external work was 10–15% higher in forward grinding. Reliability is acceptable across various loads, but testing under different heel conditions may need some protocol development to allow the detection of smaller differences in performance.     

GT3X+ accelerometer placement affects the reliability of step-counts measured during running and pedal-revolution counts measured during bicycling

Accelerometers provide a measure of step-count. Reliability and validity of step-count and pedal-revolution count measurements by the GT3X+ accelerometer, placed at different anatomical locations, is absent in the literature. The purpose of this study was to investigate the reliability and validity of step and pedal-revolution counts produced by the GT3X+ placed at different anatomical locations during running and bicycling.

Twenty-two healthy adults (14 men and 8 women) completed running and bicycling activity bouts (5 minutes each) while wearing 6 accelerometers: 2 each at the waist, thigh and shank. Accelerometer and video data were collected during activity.

Excellent reliability and validity were found for measurements taken from accelerometers mounted at the waist and shank during running (Reliability: intraclass correlation (ICC) ≥ 0.99; standard error of measurement (SEM) ≤1.0 steps; Validity: Pearson ≥ 0.99) and at the thigh and shank during bicycling (Reliability: ICC ≥ 0.99; SEM ≤1.0 revolutions; Validity: Pearson ≥ 0.99). Excellent reliability was found between measurements taken at the waist and shank during running (ICC ≥ 0.98; SEM ≤1.6 steps) and between measurements taken at the thigh and shank during bicycling (ICC ≥ 0.99; SEM ≤1.0 revolutions). These data suggest that the GT3X+ can be used for measuring step-count during running and pedal-revolution count during bicycling. Only shank placement is recommended for both activities.     

Kinematic and kinetic variability associated with the cable put and seated rotation assessments

ABSTRACT

When new protocols are developed, there is a requirement to investigate test–retest reliability of measures for valid use and interpretation of data in research and practice. Therefore, the aim of this investigation was to determine the inter-day reliability of the cable put and seated rotation assessment protocols. On three occasions, nine resistance-trained men performed cable puts and cable rotations at different loads between 6 and 42 kg on a commercially available cable cross over machine. Load stack movement was recorded using a PT5A linear position transducer from which all kinematic and kinetic variables were calculated. Reliability was excellent for peak velocity and displacement based on intraclass correlation coefficient (ICC) and coefficient of variation (CV) across the majority of loads and movements (cable put: ICC = 0.92 to 0.99, CV = 3.1% to 8.6%; cable seated rotation: ICC = 0.76 to 0.99, CV = ?1.7% to 16.1%). However, kinetic variables demonstrated inadequate reliability across the majority of days, loads and movements (ICC = 0.70, CV >10%). It was concluded that peak velocity is a reliable kinematic measure to assess muscular capability from cable put and seated rotation protocols; however, kinetic measures are too variable to provide reliable outputs across testing occasions.     

Effects of a power-focussed resistance training intervention on backward grinding performance in America's Cup sailing

This study determined whether backward grinding performance in America's Cup sailing could be improved using a training intervention to increase power capability in the upper-body pull movement. Fourteen elite male sailors (34.9 ± 5.9 years; 98.1 ± 14.4 kg; 186.6 ± 7.7 cm) were allocated into experimental (speed-focussed) and control groups. Grinding performance was assessed using a grinding ergometer and an instrumented Smith machine measured force, velocity and power during the bench pull exercise. Conventional training produced significant improvements in bench pull 1 RM (5.2 ± 4.0%; p = 0.016) and maximum force production (5.4 ± 4.0%; p = 0.014). Speed-focussed training improved maximum power (7.8 ± 4.9%; p = 0.009), power at 1RM (10.3 ± 8.9%; p = 0.019) and maximum velocity (8.4 ± 2.6%; p = 0.0002). Backward grinding performance showed greater improvements in the experimental group than the control group for moderate (+1.8%) and heavy load (+6.0%) grinding. Changes in maximum power output and power at 1 RM had large correlations (r = 0.56–0.61) with changes in both moderate and heavy load grinding performance. Time to peak force had the strongest relationship, explaining 70% of the change in heavy load grinding performance. Although the performance benefit was not entirely clear the likelihood of a detrimental effect was low ( < 5%) and therefore implementation could be recommended.     

Comparison of three-dimensional lower extremity running kinematics of young adult and elderly runners

The objective of this study was to compare the three-dimensional lower extremity running kinematics of young adult runners and elderly runners. Seventeen elderly adults (age 67-73 years) and 17 young adults (age 26-36 years) ran at 3.1 m x s(-1) on a treadmill while the movements of the lower extremity during the stance phase were recorded at 120 Hz using three-dimensional video. The three-dimensional kinematics of the lower limb segments and of the ankle and knee joints were determined, and selected variables were calculated to describe the movement. Our results suggest that elderly runners have a different movement pattern of the lower extremity from that of young adults during the stance phase of running. Compared with the young adults, the elderly runners had a substantial decrease in stride length (1.97 vs. 2.23 m; P = 0.01), an increase in stride frequency (1.58 vs. 1.37 Hz; P = 0.002), less knee flexion/extension range of motion (26 vs. 33 degrees ; P = 0.002), less tibial internal/external rotation range of motion (9 vs. 12 degrees ; P < 0.001), larger external rotation angle of the foot segment (toe-out angle) at the heel strike (-5.8 vs. -1.0 degrees ; P = 0.009), and greater asynchronies between the ankle and knee movements during running. These results may help to explain why elderly individuals could be more susceptible to running-related injuries.     

Practical precooling: effect on cycling time trial performance in warm conditions

The purpose of this study was to compare the effects of two practical precooling techniques (skin cooling vs. skin + core cooling) on cycling time trial performance in warm conditions. Six trained cyclists completed one maximal graded exercise test (VO2(peak) 71.4 +/- 3.2 ml x kg(-1) x min(-1)) and four approximately 40 min laboratory cycling time trials in a heat chamber (34.3 degrees C +/- 1.1 degrees C; 41.2% +/- 3.0% rh) using a fixed-power/variable-power format. Cyclists prepared for the time trial using three techniques administered in a randomised order prior to the warm-up: (1) no cooling (control), (2) cooling jacket for 40 min (jacket) or (3) 30-min water immersion followed by a cooling jacket application for 40 min (combined). Rectal temperature prior to the time trial was 37.8 degrees C +/- 0.1 degrees C in control, similar in jacket (37.8 degrees C +/- 0.3 degrees C) and lower in combined (37.1 degrees C +/- 0.2 degrees C, P < 0.01). Compared with the control trial, time trial performance was not different for jacket precooling (-16 +/- 36 s, -0.7%; P = 0.35) but was faster for combined precooling (-42 +/- 25 s, - .8%; P = 0.009). In conclusion, a practical combined precooling strategy that involves immersion in cool water followed by the use of a cooling jacket can produce decrease in rectal temperature that persist throughout a warm-up and improve laboratory cycling time trial performance in warm conditions.     

Inter-session Reliability of Glenohumeral Internal and External Rotation Range-of-motion Measurements is Unaffected by Use of Applied Load Feedback

ABSTRACT

This study evaluated whether real-time applied load feedback and a predefined applied load limit improved inter-session reliability and measurement error of passive glenohumeral rotation range-of-motion measurements. Twenty-one male recreational overhead athletes completed two data collection sessions, approximately 1-week apart. Measurements of internal and external rotation range-of-motion and clinician-applied loads were obtained and side-to-side differences were calculated. A load limit of 4 Nm was used for feedback trials. Perception of a capsular end-feel was used for no-feedback trials. Intraclass correlation coefficients (ICCs), standard errors of measurement (SEMs) and minimal detectable changes (MDCs) were derived. ICCs from single trials with and without feedback ranged from 0.72–0.93 and 0.63–0.89, respectively. SEMs ranged from 2.6°-6.1° with feedback and 3.3°-6.0° without feedback. MDCs from single trials with and without feedback ranged from 7.2°-16.8° and 9.1°-16.7°, respectively. Applied load feedback did not improve, already moderate to excellent, inter-session reliability and SEM for passive glenohumeral rotation range-of-motion measurements.     

Kinematics and kinetics of the drive off the front foot in cricket batting

A cinematographic analysis of the drive off the front foot (D) and the forward defensive stroke (FD) was undertaken to establish the kinematic and kinetic factors involved in playing these strokes against medium-fast bowling. Fourteen provincial cricket batsmen were filmed at 100 Hz while batting on a turf pitch with a specially instrumented bat. Results for the drive off the front foot revealed that the movement and stroke pattern were generally supportive of the coaching literature, with the forward defensive stroke forming the basis of the drive. Certain mechanical differences, although non-significant, were evident to facilitate the attacking nature of the front foot drive and included a higher backlift (FD = 0.65 m; D = 0.74 m), later commencement of the stride (FD = 0.64 s pre-impact; D = 0.58 s pre-impact) and downswing of the bat (FD = 0.38 s pre-impact; D = 0.36 s pre-impact), a shorter front foot stride (FD = 0.72 m; D = 0.68 m) with the front foot placement taking place later (FD = 0.14 s pre-impact; D = 0.06 s pre-impact), and the back foot dragging further forward at impact (FD = 0.05 m; D = 0.10 m). The front upper limb moved as a multi-segmental series of levers, which resulted in the drive showing significantly greater (P< 0.05) peak bat horizontal velocity at 0.02 s pre-impact (FD = 3.53 +/- 3.44 m s(-1); D = 11.8 +/- 4.61 m x s(-1)) and 0.02 s post-impact (FD = 2.73 +/- 2.88 m x s(-1); D = 11.3 +/- 4.21 m x s(-1)). The drive showed a significantly greater (P < 0.05) bat-ball closing horizontal velocity (FD = 24.2 +/- 4.65 m x s(-1); D = 32.3 +/- 5.06 m x s(-1)) and post-impact ball horizontal velocity (FD = 6.85 +/- 5.12 m x s(-1); D = 19.5 +/- 2.13 m x s(-1)) than for the forward defensive stroke. The point of bat-ball contact showed nonsignificant differences, but occurred further behind the front ankle (FD = 0.09 +/- 0.17 m; D = 0.20 +/- 0.13 m), with the bat more vertical at impact (FD = 62.6 +/- 6.53 degrees ; D = 77.8 +/- 7.05 degrees). Significant differences (P< 0.01) occurred between the grip forces of the top and bottom hands for the two strokes, with the principal kinetic finding that the top hand plays the dominant role during the execution of the drive with the bottom hand reinforcing it at impact. Similar grip force patterns for the two strokes occurred during the initial part of the stroke, with the drive recording significantly greater (P < 0.05) forces at 0.02 s pre-impact (top hand: FD = 129 +/- 41.6 N; D = 199 +/- 40.9 N; bottom hand: FD = 52.2 +/- 16.9 N; D = 91.8 +/- 41.1 N), at impact (top hand: FD = 124 +/- 29.3 N; D = 158 +/- 56.2 N; bottom hand: FD = 67.1 +/- 21.5 N; D = 86.2 +/- 58.2 N) and 0.02 s post-impact (top hand: FD = 111 +/- 22.2 N; D = 126 +/- 28.5 N; bottom hand: FD = 65.5 +/- 26.9 N; D = 82.4 +/- 28.6 N).     

Ad libitum fluid intakes and thermoregulatory responses of female distance runners in three environments.

Ad libitum fluid intakes and thermoregulatory responses were compared in eight female marathon runners during a 30 km treadmill run at individual best marathon race pace (range = 2.45-4.07 m x s(-1)) under three wet bulb globe temperature conditions (25 degrees C, 17 degrees C and 12 degrees C, corresponding to hot, moderate and cool conditions, respectively). Rectal temperature, mean skin temperature and heart rate were recorded at 10 min intervals and expired air was collected every 5 km during exercise. Simulated water stations were also provided at 5 km intervals with voluntary fluid intake being recorded. Blood was drawn before and after exercise for the determination of plasma volume changes and osmolarity. Ad libitum fluid intakes in the hot trial (0.70+/-0.31 l x h(-1); mean+/-s) were greater (P< 0.05) than in the cool (0.47+/-0.13 l x h(-1)) but not the moderate (0.54+/-0.26 l x h(-1)) trial. Each volume replaced 63%, 68% and 73% of total sweat losses in each condition, respectively, and kept dehydration below approximately 3% of body mass. After the initial 30 min of exercise, rectal temperature was maintained well below 39 degrees C for > 2 h of continuous running. The results demonstrate that the thermoregulatory responses of female distance runners to exercise in variable, but compensable, weather conditions is well maintained when ad libitum fluid intakes replace approximately 60-70% of sweat losses.     

The influence of a 6.5% carbohydrate-electrolyte solution on performance of prolonged intermittent high-intensity running at 30 degrees C

Nine male student games players consumed either flavoured water (0.1 g carbohydrate, Na+ 6 mmol x l(-1)), a solution containing 6.5% carbohydrate-electrolytes (6.5 g carbohydrate, Na+ 21 mmol x l(-1)) or a taste placebo (Na+ 2 mmol x l(-1)) during an intermittent shuttle test performed on three separate occasions at an ambient temperature of 30 degrees C (dry bulb). The test involved five 15-min sets of repeated cycles of walking and variable speed running, each separated by a 4-min rest (part A of the test), followed by 60 s run/60 s rest until exhaustion (part B of the test). The participants drank 6.5 ml x kg(-1) of fluid as a bolus just before exercise and thereafter 4.5 ml x kg(-1) during every exercise set and rest period (19 min). There was a trial order effect. The total distance completed by the participants was greater in trial 3 (8441 +/- 873 m) than in trial 1 (6839 +/- 512, P < 0.05). This represented a 19% improvement in exercise capacity. However, the trials were performed in a random counterbalanced order and the participants completed 8634 +/- 653 m, 7786 +/- 741 m and 7099 +/- 647 m in the flavoured water (FW), placebo (P) and carbohydrate-electrolyte (CE) trials, respectively (P = 0.08). Sprint performance was not different between the trials but was impaired over time (FW vs P vs CE: set 1, 2.41 +/- 0.02 vs 2.39 +/- 0.03 vs 2.39 +/- 0.03 s; end set, 2.46 +/- 0.03 vs 2.47 +/- 0.03 vs 2.47 +/- 0.02 s; main effect time, P < 0.01). The rate of rise in rectal temperature was greater in the carbohydrate-electrolyte trial (rise in rectal temperature/duration of trial, degrees C x h(-1); FW vs CE, P < 0.05; P vs CE, N.S.). Blood glucose concentrations were higher in the carbohydrate-electrolyte than in the other two trials (FW vs P vs CE:rest, 4.4 +/- 0.1 vs 4.3 +/- 0.1 vs 4.2 +/- 0.1 mmol x l(-1); end of exercise, 5.4 +/- 0.3 vs 6.4 +/- 0.6 vs 7.2 +/- 0.5 mmol x l(-1); main effect trial, P < 0.05; main effect time, P < 0.01). Plasma free fatty acid concentrations at the end of exercise were lower in the carbohydrate-electrolyte trial than in the other two trials (FW vs P vs CE: 0.57 +/- 0.08 vs 0.53 +/- 0.11 vs 0.29 +/- 0.04 mmol x l(-1); interaction, P < 0.01). The correlation between the rate of rise in rectal temperature (degrees C x h(-1)) and the distance completed was -0.91, -0.92 and -0.96 in the flavoured water, placebo and carbohydrate-electrolyte conditions, respectively (P < 0.01). Heart rate, blood pressure, plasma ammonia, blood lactate, plasma volume and rate of perceived exertion were not different between the three fluid trials. Although drinking the carbohydrate-electrolyte solution induced greater metabolic changes than the flavoured water and placebo solutions, it is unlikely that in these unacclimated males carbohydrate availability was a limiting factor in the performance of intermittent running in hot environmental conditions.     

Postural control quantification in minimally and moderately impaired persons with multiple sclerosis: The reliability of a posturographic test and its relationships with functional ability

BackgroundPostural control has been associated with the functional impairment in persons with multiple sclerosis (pwMS). However, there is a need for reliable methods to assess postural control in early stages of the disease, when subtle changes can be difficult to detect. The aims of this study were to assess the absolute and relative reliability of a standing and a sitting posturographic protocol in minimally (Expanded Disability Status Scale ≤ 2) and moderately (2.5 ≤ Expanded Disability Status Scale ≤ 4) impaired pwMS, and to analyze relationships among postural control and functional mobility and gait performance.MethodsTo assess postural control in an upright stance, 14 minimally and 16 moderately impaired pwMS performed six 70 s trials in tandem stance, 3 with their weaker leg behind (TS_WL) and 3 with their stronger leg behind (TS_SL). Additionally, participants completed five 70 s trials using an unstable sitting protocol (US) to assess trunk stability. The mean radial errors of TS_WL, TS_SL, and US trials were calculated as postural control indexes. Furthermore, participants performed the Timed Up and Go test (TUG) and the Timed 25-foot Walk test (T25FW) to measure their functional mobility and gait speed, respectively. Reliability was evaluated using the intraclass correlation coefficient (ICC_3,1) and the standard error of measurement (SEM). Analyses of variances were carried out to assess between-group differences. Hedges’ g index (d_g) was used to estimate the effect size of differences. Pearson correlation analyses (r) were performed to examine the relationships among the postural control and the functional tests.ResultsPosturographic tests showed a high reliability in both minimally (0.87 ≤ ICC ≤ 0.92; 9.32% ≤ SEM ≤ 11.76%) and moderately (0.80 ≤ ICC ≤ 0.92; 10.33% ≤ SEM ≤ 15.33%) impaired pwMS. Similarly, T25FW and TUG displayed a high consistency in minimally (0.89 ≤ ICC ≤ 0.94; 3.43% ≤ SEM ≤ 5.17%) and moderately (0.85 ≤ ICC ≤ 0.93; 5.57% ≤ SEM ≤ 6.56%) impaired individuals. Minimally impaired pwMS showed a better performance on the TUG, T25FW, and TS_WL than moderately impaired individuals (p < 0.05; d_g ≥ 0.8). The TS_WL, TS_SL, and US variables correlated with TUG scores (0.419 ≤ r ≤ 0.604; p < 0.05), but TS_WL also correlated with T25FW scores (r = 0.53; p < 0.01). Furthermore, US scores correlated with both tandem stance parameters (TS_WL: r = 0.54, p < 0.01; TS_SL: r = 0.43, p < 0.05).ConclusionTandem and sitting posturographic tests provide reliable measures of postural control in pwMS, even in individuals with a homogeneous disease profile. Gait speed, functional mobility, and weaker leg status seem decisive in assessing the degree of physical activity limitation in pwMS. Finally, although trunk stability does not seem to be so affected by the course of the disease, it remains relevant for postural control and functional capacity.     

The reliability of force-velocity-power profiling during over-ground sprinting in children and adolescents

ABSTRACT

Anaerobic performance in youth has received little attention partly due to the lack of a “gold-standard” measurement. However, force-velocity-power (F-v-P) profiling recently showed high reliability and validity in trained adults. Therefore, the aim was to determine the reliability of F-v-P profiling in children and adolescents. Seventy-five children (60 boys, 15 girls; age: 14.1 ± 2.6 years) completed three 30 m sprints. Velocity was measured at 46.875 Hz using a radar device. The F-v-P profile was fitted to a velocity-time curve allowing instantaneous power variables to be calculated. Reliability was assessed using the intra-class correlation coefficient (ICC), coefficient of variation (CV), standard error of measurement (SEM) and smallest worthwhile change (SWC). High reliability was evident for absolute peak (P_peak) and mean power (P_mean), P_peak and P_mean expressed relative to body mass, peak and mean velocity, 30 m sprint time, peak horizontal force (F₀), relative F₀, mechanical efficiency index and fatigue rate (ICC: 0.75–0.88; CV: 1.9–9.4%) with time to peak power demonstrating moderate reliability (ICC: 0.50; CV: 9.5%). The F-v-P model demonstrated at least moderate reliability for all variables. This therefore provides a potential alternative for paediatric researchers assessing sprint performance and the underlying kinetics.     

The effect of crank inertial load on the physiological and biomechanical responses of trained cyclists

The existing literature suggests that crank inertial load has little effect on the responses of untrained cyclists. However, it would be useful to be aware of any possible effect in the trained population, particularly considering the many laboratory-based studies that are conducted using relatively low-inertia ergometers. Ten competitive cyclists (mean VO(2max) = 62.7 ml x kg(-1) x min(-1), s = 6.1) attended the human performance laboratories at the University of Wolverhampton. Each cyclist completed two 7-min trials, at two separate inertial loads, in a counterbalanced order. The inertial loads used were 94.2 kg x m(2) (high-inertia trial) and 2.4 kg x m(2) (low-inertia trial). Several physiological and biomechanical measures were undertaken. There were no differences between inertial loads for mean peak torque, mean minimum torque, oxygen uptake, blood lactate concentration or perceived exertion. Several measures showed intra-individual variability with blood lactate concentration and mean minimum torque, demonstrating coefficients of variation > 10%. However, the results presented here are mostly consistent with previous work in suggesting that crank inertial load has little direct effect on either physiology or propulsion biomechanics during steady-state cycling, at least when cadence is controlled.     

最大吸氧量间接测算全新通用方程及其应用

作者论证了最大吸氧量间接测算全新通用议程组男VO2m,Ka;女,VO2mKa.式中：P,运动强度,单位,瓦;f,运动心率,次／分;n＝0.16－0．21,人机效率;Ka＝1．25~0．01A,A,年龄系数。在A＝25、P＝50~200瓦、f＝120~170次／分之间,方程组VO2m测算范围（1．6~6．0）升／分,包括体力弱者及世界级马拉松运动员,与奥斯特兰德实测数序表偏差不大于3％。     

Effect of bovine colostrum on anaerobic exercise performance and plasma insulin-like growth factor I

In this study, we examined the effects of bovine colostrum on peak vertical jump power (VJpeak), peak cycle power (CPpeak), alactic anaerobic work capacity, resistance exercise one-repetition maxima (1-RM) and plasma insulin-like growth factor I (IGF-I) concentrations. Using a randomized, double-blind, placebo-controlled, parallel design, 51 males completed 8 weeks of resistance and plyometric training while consuming 60 g x day(-1) of bovine colostrum (n = 26) or concentrated whey protein powder (n = 25). Peak vertical jump power, peak cycle power, alactic anaerobic work capacity, 1-RM and plasma IGF-I were not different between groups at baseline (P > 0.33). Peak vertical jump power and peak cycle power were still not significantly different between groups by week 4 (VJpeak: bovine colostrum, 7231 +/- 488 W; whey protein, 7214 +/- 530 W; P = 0.99; CPpeak: bovine colostrum, 1272 +/- 202 W; whey protein, 1232 +/- 208 W; P = 0.99). By week 8, however, peak vertical jump power (bovine colostrum, 7370 +/- 503 W; whey powder, 7237 +/- 481 W; 95% confidence intervals, 54 to 170 W; P < 0.01) and peak cycle power (bovine colostrum, 1400 +/- 215 W; whey protein, 1311 +/- 192 W; 95% confidence intervals, 20 to 61 W; P < 0.01) were significantly higher in the bovine colostrum condition. Alactic anaerobic work capacity and 1-RM increased (P < 0.001), but the increases were not different between groups (P > 0.08). Plasma IGF-I did not change in either group (P = 0.55). We conclude that bovine colostrum supplementation during training significantly increased peak anaerobic power, but had no effect on alactic anaerobic work capacity, 1-RM or plasma IGF-I.     

Muscle fatigue induced by exercise simulating the work rate of competitive soccer

Fatigue represents a reduction in the capability of muscle to generate force. The aim of the present study was to establish the effects of exercise that simulates the work rate of competitive soccer players on the strength of the knee extensors and knee flexors. Thirteen amateur soccer players (age 23.3+/-3.9 years, height 1.78+/-0.05 m, body mass 74.8+/-3.6 kg; mean+/-s) were tested during the 2000-2001 soccer season. Muscle strength of the quadriceps and hamstrings was measured on an isokinetic dynamometer. A 90 min soccer-specific intermittent exercise protocol, incorporating a 15 min half-time intermission, was developed to provide fatiguing exercise corresponding in work rate to a game of soccer. The exercise protocol, performed on a programmable motorized treadmill, consisted of the different intensities observed during soccer match-play (e.g. walking, jogging, running, sprinting). Muscle strength was assessed before exercise, at half-time and immediately after exercise. A repeated-measures analysis of variance showed significant reductions (P < 0.001) in peak torque for both the quadriceps and hamstrings at all angular velocities (concentric: 1.05, 2.09, 5.23 rad x s(-1); eccentric: 2.09 rad x s(-1)). The peak torque of the knee extensors (KE) and knee flexors (KF) was greater before exercise [KE: 232+/-37, 182+/-34, 129+/-27, 219+/-41 N x m at 1.05, 2.09 and 5.23 rad x s(-1) (concentric) and 2.09 rad x s(-1) (eccentric), respectively; KF: 126+/-20, 112+/-19, 101+/-16, 137+/-23 N x m] than at half-time (KE: 209+/-45, 177+/-35, 125+/-36, 214+/-43 N x m; KF: 114+/-31, 102+/-20, 92+/-15, 125+/-25 N x m) and greater at half-time than after exercise (KE: 196+/-43, 167+/-35, 118+/-24, 204+/-43 N x m; KF: 104+/-25, 95+/-21, 87+/-13, 114+/-27 N x m). For the hamstrings:quadriceps ratio, significant changes were found (P < 0.05) for both legs, the ratio being greater before than after exercise. For fast:slow speed and left:right ratios, no significant changes were found. We conclude that there is a progressive reduction in muscle strength that applies across a range of functional characteristics during exercise that mimics the work rate in soccer.     

Whole-body pre-cooling and heat storage during self-paced cycling performance in warm humid conditions

The aim of this study was to establish the effect that pre-cooling the skin without a concomitant reduction in core temperature has on subsequent self-paced cycling performance under warm humid (31 degrees C and 60% relative humidity) conditions. Seven moderately trained males performed a 30 min self-paced cycling trial on two separate occasions. The conditions were counterbalanced as control or whole-body pre-cooling by water immersion so that resting skin temperature was reduced by approximately 5-6 degrees C. After pre-cooling, mean skin temperature was lower throughout exercise and rectal temperature was lower (P < 0.05) between 15 and 25 min of exercise. Consequently, heat storage increased (P < 0.003) from 84.0+/-8.8 W x m(-2) to 153+/-13.1 W x m(-2) (mean +/- s(mean)) after pre-cooling, while total body sweat fell from 1.7+/-0.1 l x h(-1) to 1.2+/-0.1 l h(-1) (P < 0.05). The distance cycled increased from 14.9+/-0.8 to 15.8+/-0.7 km (P < 0.05) after pre-cooling. The results indicate that skin pre-cooling in the absence of a reduced rectal temperature is effective in reducing thermal strain and increasing the distance cycled in 30 min under warm humid conditions.     

Characteristics impacting on session rating of perceived exertion training load in Australian footballers

The relationship between external training load and session rating of perceived exertion (s-RPE) training load and the impact that playing experience, playing position and 2-km time-trial performance had on s-RPE training load were explored. From 39 Australian Football players, 6.9 ± 4.6 training sessions were analysed, resulting in 270 samples. Microtechnology devices provided external training load (distance, average speed, high-speed running distance, player load (PL) and player load_slow (PL_slow)). The external training load measures had moderate to very large associations (r, 95% CI) with s-RPE training load, average speed (0.45, 0.35–0.54), high-speed running distance (0.51, 0.42–0.59), PL_slow (0.80, 0.75–0.84), PL (0.86, 0.83–0.89) and distance (0.88, 0.85–0.90). Differences were described using effect sizes (d ±95% CL). When controlling for external training load, the 4- to 5-year players had higher s-RPE training load than the 0- to 1- (0.44 ± 0.33) and 2- to 3-year players (0.51 ± 0.30), ruckmen had moderately higher s-RPE training load than midfielders (0.82 ± 0.58), and there was a 0.2% increase in s-RPE training load per 1 s increase in time-trial (95% CI: 0.07–0.34). Experience, position and time-trial performance impacted the relationship between external training load and s-RPE training load. This suggests that a given external training load may result in different internal responses between athletes, potentially leaving individuals at risk of overtraining or failing to elicit positive adaptation. It is therefore vital that coaches and trainers give consideration to these mediators of s-RPE training load.     

Neuromuscular variables affecting the magnitude of force loss after eccentric exercise

The aim of this study was to examine neuromuscular variables contributing to differences in force loss after participants were exposed to the same relative bout of eccentric exercise. Thirty-six males performed 50 maximal eccentric contractions of the elbow flexors and were stratified into high responders (n = 10) and low responders (n = 10) based on force loss 36 h after exercise. Maximal voluntary isometric contractions (MVCs) and electromyography (EMG) were measured at baseline and 36 h after exercise. During eccentric exercise, mean peak torque, mean end-range torque from the final 25% of each trial and total angular impulse were computed over 25 contractions in each of two bouts. The slope of the change in these values for each 25 eccentric contractions was calculated for each participant using linear regression. At baseline, MVC was not different between groups (low responders: 97.0 +/- 9.6 N x m; high responders: 82.7 +/- 6.4 N x m; P = 0.08). High responders demonstrated a 68% (range 62-78%) reduction in MVC and low responders a 39% (29-48%) reduction after exercise. Peak torque, end-range torque and total angular impulse were 13%, 40% and 33% higher, respectively, in the low than in the high responders (peak torque: P = 0.0002; end-range torque: P < 0.0001; total angular impulse: P < 0.001). The rate of decline in peak torque slope was greater in high than in low responders (P = 0.044). In conclusion, lower peak torque, end-range torque and total angular impulse during eccentric contractions and a greater peak torque slope may identify high responders to eccentric exercise.