Investigation of Separated Flow around a Curved Air Intake

Nomenclaturex,y,g,11Cartcsiatlandcurvilinearcoordinatesif,v,U.j,'physicalvelocitycomponentsandcontl'avat7ian[velocitycomponCntsk,eturbulen[bineticcnet'gyanditsdissipationA)nl,nctlturbulent,lanlinarandof'l'ectivcviscositiesfdin\lsioncoel'tlcientRe.,Reynold…     

Inverstigation on the Separated Turbulent Flow Field in Dual Rectangular Jets

In the present paper,the flow field of dual rectangular jets was numerically simulated by solving the full Reynolds averaged Navier-Stokes equations,where the RNG κ-ε model and the finite volume method were used.The flow structure in dual rectangular jets and the effects of the velocity were investigated.The numerical results agree qualitatively with the experimental data.     

Numerical simulation and experimental research on indoor environment separated with down-feed air curtain

Indoor environment separated with down.feed air curtain was numerically simulated and experimentally researched.Indoor airflow and temperature fields separated with air curtain were numerically simulated.Resuits show that both polluted airflow and thermal air current can be separated with a down.feed air curtain to prevent contaminants from spreading in the room space.In a test chamber.the smoke of burning Tibetan incense served as the source of contaminants.and the probe test shows that 1.0 pm is the prevailing diameter of the smoke particles.During the release of the smoke.the particle concentration of the indoor air was tested with a laser particle counter at the points of three different heights from the floor when the air curtain was running or not.Experimental results show that the higher the test point is located,the lower the particle concentration is,implying that the separating or isolating eflfect decreases as the air velocity of the curtain reduces along with the height descends.According to both simulation and experimental results.down.feed air curtain can separate indoor environment effectively when the supply air velocity of air curtain is not less than 3 m/s.In order to strengthen separation effect,it is suggested that the supply air velocity be speeded up to 5 m/s.     

Numerical simulation of wind flow fields around buildings using the lattice Boltzmann method

This paper presents the simulation results of the wind environment around a single high-rise building and that around two tall buildings in tandem arrangement by using the lattice Boltzmann method with an aim to understand the ventilation issues around high-rise buildings in an urban environment. We analyzed the velocity distribution around the buildings and performed numericl simulations to reveal the formation and evolution law of the complex vortex system around the high-rise buildings. Numerical simulation results manifest a periodicity phenamenon in the process of the vortex evolution. For the case of two high-rise buildings, wind velocity in the space between the two buildings is very small, which is nearly a silent regime. Wind velocity above the front building is relatively larger and the maximum wind velocity is approximately 2.5 times the incoming wind velocity. The numerical results can be used in layout planning of high-rise residential buildings to create better environment for ventilation purpose in an urban area.     

Numerical simulation of interaction between laminar flow and elastic sheet

A numerical simulation of the interaction between laminar flow with low Reynolds number and a highly flexible elastic sheet is presented. The mathematical model for the simulation includes a three-dimensional finitevolume based fluid solver for incompressible viscous flow and a combined finite-discrete element method for the three-dimensional deformation of solid. An immersed boundary method is used to couple the simulation of fluid and solid. It is implemented through a set of immersed boundary points scattered on the solid surface. These points provide a deformable solid wall boundary for the fluid by adding body force to Navier-Stokes equations. The force from the fluid is also obtained for each point and then applied on the boundary nodes of the solid. The vortex-induced vibration of the highly flexible elastic sheet is simulated with the established mathematical model. The simulated results for both swing pattern and oscillation frequency of the elastic sheet in low Reynolds number flow agree well with experimental data.     

圆柱周围湍流场的数值模拟

In practical problems, the variation of the free surface around a circular pier is severe. For the Fluent CFD, the multiphase flow models cannot be used together with the LES model to calculate the free surface. Present paper provides a two-step method which joints the 2D compressible ideal-gas equations and the LES model to calculate the 3D flow field with free surface around the pier. The effects of the free surface on the flow structures are studied in detail.     

二维轴对称电子回旋共振等离子体磁场的数值模拟

本文根据大连理工大学三束材料改性国家重点实验室的电子回旋共振(ECR)微波等离子实验装置,结合等离子体源中的各种物理参量,采用一种简便快捷的方法在计算机上对ECR等离子体的磁场位形进行了数值模拟,数值模拟结果表明在共振区磁场强度的值达到最大值,这与实验结果一致.     

Numerical investigation of cavitating flow behind the cone of a poppet valve in water hydraulic system

Computational Fluid Dynamics (CFD) simulations of cavitating flow through water hydraulic poppet valves were performed using advanced RNGk-epsilon turbulence model. The flow was turbulent, incompressible and unsteady, for Reynolds numbers greater than 43000. The working fluid was water, and the structure of the valve was simplified as a two dimensional axisymmetric geometrical model. Flow field visualization was numerically achieved. The effects of inlet velocity, outlet pressure, opening size as well as poppet angle on cavitation intensity in the poppet valve were numerically investigated. Experimental flow visualization was conducted to capture cavitation images near the orifice in the poppet valve with 30° poppet angle using high speed video camera. The binary cavitating flow field distribution obtained from digital processing of the original cavitation image showed a good agreement with the numerical result. Project supported by the National Natural Science Foundation of China (No. 59835160) and Scientific Research Foundation for Returned Overseas Chinese Scholars, State Education Ministry of China (No. 50175097)     

螺旋折流片强化管壳式换热器内管束传热数值模拟

介绍了一种用于强化管壳式换热器壳侧传热和支撑管束的螺旋折流片新型结构,该结构是对换热器管子相间地套上螺旋折流片以产生旋涡流动.研究模型是在正方形布置的4个管子中的2个对角管子套上螺旋折流片后形成的通道,利用FLUENT软件对该上述四管通道模型的流场和温度分布情况进行了数值模拟;分析了四管通道模型中螺旋折流片对强化传热和流动阻力随雷诺数的变化关系的影响.算例结果显示该新型结构可比相同尺寸的光管通道中的情形传热系数提高约40%～55%,同时也将伴随较高的流动阻力.可以相信螺旋折流片式换热器将会在许多工业领域有良好的应用前景.     

河道一维水沙运动的数值模拟

研究河道一维水沙数学模型,提出了一个简单易行的计算方法.经实例验证,该模型具有计算程序容易实现,计算结果较合理的优点.且利用该模型,还可研究短期或长期的河流冲淤变化问题。     

对锥形扩散器内紊流的数值仿真与分析

本文用DLR（近壁低雷诺数）型k-ε紊流模型·BFC（边界拟合曲线坐标变换）法对锥形扩散器内的紊流进行了数值仿真与分析。通过对数值仿真结果和实验结果的比较,分析不同模型常数组、模型函数组和时间步长对时均速度和紊流动能的影响。