The production of anatomical teaching resources using three‐dimensional (3D) printing technology

The teaching of anatomy has consistently been the subject of societal controversy, especially in the context of employing cadaveric materials in professional medical and allied health professional training. The reduction in dissection‐based teaching in medical and allied health professional training programs has been in part due to the financial considerations involved in maintaining bequest programs, accessing human cadavers and concerns with health and safety considerations for students and staff exposed to formalin‐containing embalming fluids. This report details how additive manufacturing or three‐dimensional (3D) printing allows the creation of reproductions of prosected human cadaver and other anatomical specimens that obviates many of the above issues. These 3D prints are high resolution, accurate color reproductions of prosections based on data acquired by surface scanning or CT imaging. The application of 3D printing to produce models of negative spaces, contrast CT radiographic data using segmentation software is illustrated. The accuracy of printed specimens is compared with original specimens. This alternative approach to producing anatomically accurate reproductions offers many advantages over plastination as it allows rapid production of multiple copies of any dissected specimen, at any size scale and should be suitable for any teaching facility in any country, thereby avoiding some of the cultural and ethical issues associated with cadaver specimens either in an embalmed or plastinated form. Anat Sci Educ 7: 479–486. © 2014 American Association of Anatomists.     

Anatomy Learning from Prosected Cadaveric Specimens Versus Plastic Models: A Comparative Study of Upper Limb Anatomy

Human cadaveric prosections are a traditional, effective, and highly appreciated modality of anatomy learning. Plastic models are an alternative teaching modality, though few studies examine their effectiveness in learning of upper limb musculoskeletal anatomy. The purpose of this study is to investigate which modality is associated with a better outcome, as assessed by students' performance on examinations. Overall, 60 undergraduate medical students without previous knowledge of anatomy participated in the study. Students were assigned into two groups. Group 1 attended lectures and studied from cadaveric prosections (n = 30) and Group 2 attended lectures and used plastic models in the laboratory (n = 30). A knowledge assessment, including examination with tag questions (spot test) and written multiple-choice questions, was held after the end of the study. Students' perceptions were also investigated via an anonymous questionnaire. No significant difference in students' performance was observed between the group using prosections and the group using plastic models (32.2 ± 14.7 vs 35.0 ± 14.8, respectively; P = 0.477). Similarly, no statistically significant difference was found regarding students' satisfaction from using each learning modality (P = 0.441). Plastic models may be a valuable supplementary modality in learning upper limb musculoskeletal anatomy, despite their limitations. Easy to use and with no need for maintaining facilities, they are highly appreciated by students and can be useful when preparing for the use of cadaveric specimens.     

Dual‐extrusion 3D printing of anatomical models for education

Two material 3D printing is becoming increasingly popular, inexpensive and accessible. In this paper, freely available printable files and dual extrusion fused deposition modelling were combined to create a number of functional anatomical models. To represent muscle and bone FilaFlex^3D flexible filament and polylactic acid (PLA) filament were extruded respectively via a single 0.4 mm nozzle using a Big Builder printer. For each filament, cubes (5 mm³) were printed and analyzed for X, Y, and Z accuracy. The PLA printed cubes resulted in errors averaging just 1.2% across all directions but for FilaFlex^3D printed cubes the errors were statistically significantly greater (average of 3.2%). As an exemplar, a focus was placed on the muscles, bones and cartilage of upper airway and neck. The resulting single prints combined flexible and hard structures. A single print model of the vocal cords was constructed which permitted movement of the arytenoids on the cricoid cartilage and served to illustrate the action of intrinsic laryngeal muscles. As University libraries become increasingly engaged in offering inexpensive 3D printing services it may soon become common place for both student and educator to access websites, download free models or 3D body parts and only pay the costs of print consumables. Novel models can be manufactured as dissectible, functional multi‐layered units and offer rich possibilities for sectional and/or reduced anatomy. This approach can liberate the anatomist from constraints of inflexible hard models or plastinated specimens and engage in the design of class specific models of the future. Anat Sci Educ 11: 65–72. © 2017 American Association of Anatomists.     

Investigating the effectiveness of three-dimensionally printed anatomical models compared with plastinated human specimens in learning cardiac and neck anatomy: A randomized crossover study

Three-dimensional printing (3DP) technology has been increasingly applied in health profession education. Yet, 3DP anatomical models compared with the plastinated specimens as learning scaffolds are unclear. A randomized-controlled crossover study was used to evaluate the objective outcomes of 3DP models compared with the plastinated specimens through an introductory lecture and team study for learning relatively simple (cardiac) and complex (neck) anatomies. Given the novel multimaterial and multicolored 3DP models are replicas of the plastinated specimens, it is hypothesized that 3DP models have the same educational benefits to plastinated specimens. This study was conducted in two phases in which participants were randomly assigned to 3DP (n = 31) and plastinated cardiac groups (n = 32) in the first phase, whereas same groups (3DP, n = 15; plastinated, n = 18) used switched materials in the second phase for learning neck anatomy. The pretest, educational activities and posttest were conducted for each phase. Miller's framework was used to assess the cognitive outcomes. There was a significant improvement in students' baseline knowledge by 29.7% and 31.3% for Phase 1; 31.7% and 31.3% for Phase 2 plastinated and 3DP models. Posttest scores for cardiac (plastinated, 3DP mean ± SD: 57.0 ± 13.3 and 60.8 ± 13.6, P = 0.27) and neck (70.3 ± 15.6 and 68.3 ± 9.9, P = 0.68) phases showed no significant difference. In addition, no difference observed when cognitive domains compared for both cases. These results reflect that introductory lecture plus either the plastinated or 3DP modes were effective for learning cardiac and neck anatomy.     

Simulating the multi‐disciplinary care team approach: Enhancing student understanding of anatomy through an ultrasound‐anchored interprofessional session

Quality of healthcare delivery is dependent on collaboration between professional disciplines. Integrating opportunities for interprofessional learning in health science education programs prepares future clinicians to function as effective members of a multi‐disciplinary care team. This study aimed to create a modified team‐based learning (TBL) environment utilizing ultrasound technology during an interprofessional learning activity to enhance musculoskeletal anatomy knowledge of first year medical (MD) and physical therapy (PT) students. An ultrasound demonstration of structures of the upper limb was incorporated into the gross anatomy courses for first‐year MD (n = 53) and PT (n = 28) students. Immediately before the learning experience, all students took an individual readiness assurance test (iRAT) based on clinical concepts regarding the assigned study material. Students observed while a physical medicine and rehabilitation physician demonstrated the use of ultrasound as a diagnostic and procedural tool for the shoulder and elbow. Following the demonstration, students worked within interprofessional teams (n = 14 teams, 5–6 students per team) to review the related anatomy on dissected specimens. At the end of the session, students worked within interprofessional teams to complete a collaborative clinical case‐based multiple choice post‐test. Team scores were compared to the mean individual score within each team with the Wilcoxon signed‐rank test. Students scored higher on the collaborative post‐test (95.2 ±10.2%) than on the iRAT (66.1 ± 13.9% for MD students and 76.2 ±14.2% for PT students, P < 0.0001). Results suggest that this interprofessional team activity facilitated an improved understanding and clinical application of anatomy. Anat Sci Educ 11: 94–99. © 2017 American Association of Anatomists.     

Take away body parts! An investigation into the use of 3D‐printed anatomical models in undergraduate anatomy education

Understanding the three‐dimensional (3D) nature of the human form is imperative for effective medical practice and the emergence of 3D printing creates numerous opportunities to enhance aspects of medical and healthcare training. A recently deceased, un‐embalmed donor was scanned through high‐resolution computed tomography. The scan data underwent segmentation and post‐processing and a range of 3D‐printed anatomical models were produced. A four‐stage mixed‐methods study was conducted to evaluate the educational value of the models in a medical program. (1) A quantitative pre/post‐test to assess change in learner knowledge following 3D‐printed model usage in a small group tutorial; (2) student focus group (3) a qualitative student questionnaire regarding personal student model usage (4) teaching faculty evaluation. The use of 3D‐printed models in small‐group anatomy teaching session resulted in a significant increase in knowledge (P = 0.0001) when compared to didactic 2D‐image based teaching methods. Student focus groups yielded six key themes regarding the use of 3D‐printed anatomical models: model properties, teaching integration, resource integration, assessment, clinical imaging, and pathology and anatomical variation. Questionnaires detailed how students used the models in the home environment and integrated them with anatomical learning resources such as textbooks and anatomy lectures. In conclusion, 3D‐printed anatomical models can be successfully produced from the CT data set of a recently deceased donor. These models can be used in anatomy education as a teaching tool in their own right, as well as a method for augmenting the curriculum and complementing established learning modalities, such as dissection‐based teaching. Anat Sci Educ 11: 44–53. © 2017 American Association of Anatomists.     

Differences Between Attached and Detached Cadaveric Prosections on Students' Identification Ability During Practical Examinations

Cadaveric prosections are effective learning tools in anatomy education. They range from a fully dissected, sometimes plastinated, complete cadaver (in situ prosections), to a single, carefully dissected structure detached from a cadaver (ex situ prosections). While most research has focused on the advantages and disadvantages of dissection versus prosection, limited information is available on the instructional efficacy of different prosection types. This contribution explored potential differences between in situ and ex situ prosections regarding the ability of undergraduate students to identify anatomical structures. To determine if students were able to recognize the same anatomical structure on both in situ and ex situ prosections, or on either one individually, six structures were tagged on both prosection types as part of three course summative examinations. The majority of students (61%–68%) fell into one of the two categories: those that recognized or failed to recognize the same structure on both in situ and ex situ prosections. The percentage of students who recognized a selected structure on only one type of prosection was small (1.6%–31.6%), but skewed in favor of ex situ prosections (P ≤ 0.01). These results suggest that overall students' identification ability was due to knowledge differences, not the spatial or contextual challenges posed by each type of prosection. They also suggest that the relative difficulty of either prosection type depends on the nature of the anatomical structure. Thus, one type of prosection might be more appropriate for teaching some structures, and therefore the use of both types is recommended.     

The diverse utility of wet prosections and plastinated specimens in teaching gross anatomy in New Zealand

Anatomical education has traditionally used cadaveric material to study the human body, with both wet prosections and plastinated (PP) material commonly utilized. However, the frequency of use of these different preparation modes in a tertiary institution has not been previously examined. An audit of PP use in the Department of Anatomy and Structural Biology at the University of Otago was performed for 2009, assessing the number of courses, variety, and number of PP used throughout 2009. Results indicate the unique and diverse nature of PP utilization and are discussed with reference to their relative strengths and weaknesses. Such information is useful to those wishing to initiate or maintain programs that involve the teaching of human anatomy with cadaveric material.     

Novel dissection of the central nervous system to bridge gross anatomy and neuroscience for an integrated medical curriculum

Medical schools in the United States continue to undergo curricular change, reorganization, and reformation as more schools transition to an integrated curriculum. Anatomy educators must find novel approaches to teach in a way that will bridge multiple disciplines. The cadaveric extraction of the central nervous system (CNS) provides an opportunity to bridge gross anatomy, neuroanatomy, and clinical neurology. In this dissection, the brain, brainstem, spinal cord, cauda equina, optic nerve/tract, and eyes are removed in one piece so that the entire CNS and its gateway to the periphery through the spinal roots can be appreciated. However, this dissection is rarely, if ever, performed likely due to time constraints, perceived difficulty, and lack of instructions. The goals of this project were (i) to provide a comprehensive, step‐by‐step guide for an en bloc CNS extraction and (ii) to determine effective strategies to implement this dissection/prosection within modern curricula. Optimal dissection methods were determined after comparison of various approaches/tools, which reduced dissection time from approximately 10 to 4 hours. The CNS prosections were piloted in small group sessions with two types of learners in two different settings: graduate students studied wet CNS prosections within the dissection laboratory and medical students used plastinated CNS prosections to review clinical neuroanatomy and solve lesion localization cases during their neurology clerkship. In both cases, the CNS was highly rated as a teaching tool and 98% recommended it for future students. Notably, 90% of medical students surveyed suggested that the CNS prosection be introduced prior to clinical rotations. Anat Sci Educ 11: 185–195. © 2017 American Association of Anatomists.     

Production of accurate skeletal models of domestic animals using three‐dimensional scanning and printing technology

Access to adequate anatomical specimens can be an important aspect in learning the anatomy of domestic animals. In this study, the authors utilized a structured light scanner and fused deposition modeling (FDM) printer to produce highly accurate animal skeletal models. First, various components of the bovine skeleton, including the femur, the fifth rib, and the sixth cervical (C6) vertebra were used to produce digital models. These were then used to produce 1:1 scale physical models with the FDM printer. The anatomical features of the digital models and three‐dimensional (3D) printed models were then compared with those of the original skeletal specimens. The results of this study demonstrated that both digital and physical scale models of animal skeletal components could be rapidly produced using 3D printing technology. In terms of accuracy between models and original specimens, the standard deviations of the femur and the fifth rib measurements were 0.0351 and 0.0572, respectively. All of the features except the nutrient foramina on the original bone specimens could be identified in the digital and 3D printed models. Moreover, the 3D printed models could serve as a viable alternative to original bone specimens when used in anatomy education, as determined from student surveys. This study demonstrated an important example of reproducing bone models to be used in anatomy education and veterinary clinical training. Anat Sci Educ 11: 73–80. © 2017 American Association of Anatomists.     

National Survey on Canadian Undergraduate Medical Programs: The Decline of the Anatomical Sciences in Canadian Medical Education

The anatomical sciences have always been regarded as an essential component of medical education. In Canada, the methodology and time dedicated to anatomy teaching are currently unknown. Two surveys were administered to course directors and discipline leaders to gain a comprehensive view of anatomical education in Canadian medical schools. Participants were queried about contact hours (classroom and laboratory), content delivery and assessment methods for gross anatomy, histology, and embryology. Twelve schools responded to both surveys, for an overall response rate of 64%. Overall, Canadian medical students spend 92.8 (± 45.4) hours (mean ± SD) studying gross anatomy, 25.2 (± 21.0) hours for histology, and 7.4 (± 4.3) hours for embryology. Gross anatomy contact hours statistically significantly exceeded those for histology and embryology. Results show that most content is delivered in the first year of medical school, as anatomy is a foundational building block for upper-year courses. Laboratory contact time for gross anatomy was 56.8 (± 30.7) hours, histology was 11.4 (± 16.2) hours, and embryology was 0.25 (± 0.6) hours. Additionally, 42% of programs predominantly used instructor/technician-made prosections, another 33% used a mix of dissection and prosections and 25% have their students complete cadaveric dissections. Teaching is either completely or partially integrated into all Canadian medical curricula. This integration trend in Canada parallels those of other medical schools around the world where programs have begun to decrease contact time in anatomy and increase integration of the anatomical sciences into other courses. Compared to published American data, Canadian schools offer less contact time. The reason for this gap is unknown. Further investigation is required to determine if the amount of anatomical science education within medical school affects students' performance in clerkship, residency and beyond.     

Three-dimensional Printing in Anatomy Education: Assessing Potential Ethical Dimensions

New technological developments have frequently had major consequences for anatomy education, and have raised ethical queries for anatomy educators. The advent of three-dimensional (3D) printing of human material is showing considerable promise as an educational tool that fits alongside cadaveric dissection, plastination, computer simulation, and anatomical models and images. At first glance its ethical implications appear minimal, and yet the more extensive ethical implications around clinical bioprinting suggest that a cautious approach to 3D printing in the dissecting room is in order. Following an overview of early groundbreaking studies into 3D printing of prosections, organs, and archived fetal material, it has become clear that their origin, using donated bodies or 3D files available on the Internet, has ethical overtones. The dynamic presented by digital technology raises questions about the nature of the consent provided by the body donor, reasons for 3D printing, the extent to which it will be commercialized, and its comparative advantages over other available teaching resources. In exploring questions like these, the place of 3D printing within a hierarchical sequence of value is outlined. Discussion centers on the significance of local usage of prints, the challenges created by regarding 3D prints as disposable property, the importance of retaining the human side to anatomy, and the unacceptability of obtaining 3D-printed material from unclaimed bodies. It is concluded that the scientific tenor of 3D processes represents a move away from the human person, so that efforts are required to prevent them accentuating depersonalization and commodification.     

The Effects of a Functional Three-dimensional (3D) Printed Knee Joint Simulator in Improving Anatomical Spatial Knowledge

In recent decades, three-dimensional (3D) printing as an emerging technology, has been utilized for imparting human anatomy knowledge. However, most 3D printed models are rigid anatomical replicas that are unable to represent dynamic spatial relationships between different anatomical structures. In this study, the data obtained from a computed tomography (CT) scan of a normal knee joint were used to design and fabricate a functional knee joint simulator for anatomical education. Utility of the 3D printed simulator was evaluated in comparison with traditional didactic learning in first-year medical students (n = 35), so as to understand how the functional 3D simulator could assist in their learning of human anatomy. The outcome measure was a quiz comprising 11 multiple choice questions based on locking and unlocking of the knee joint. Students in the simulation group (mean score = 85.03%, ±SD 10.13%) performed significantly better than those in the didactic learning group, P < 0.05 (mean score = 70.71%, ±SD 15.13%), which was substantiated by large effect size, as shown by a Cohen’s d value of 1.14. In terms of learning outcome, female students who used 3D printed simulators as learning aids achieved greater improvement in their quiz scores as compared to male students in the same group. However, after correcting for the modality of instruction, the sex of the students did not have a significant influence on the learning outcome. This randomized study has demonstrated that the 3D printed simulator is beneficial for anatomical education and can help in enriching students’ learning experience.     

Three‐dimensional printing of X‐ray computed tomography datasets with multiple materials using open‐source data processing

Advances in three‐dimensional (3D) printing allow for digital files to be turned into a “printed” physical product. For example, complex anatomical models derived from clinical or pre‐clinical X‐ray computed tomography (CT) data of patients or research specimens can be constructed using various printable materials. Although 3D printing has the potential to advance learning, many academic programs have been slow to adopt its use in the classroom despite increased availability of the equipment and digital databases already established for educational use. Herein, a protocol is reported for the production of enlarged bone core and accurate representation of human sinus passages in a 3D printed format using entirely consumer‐grade printers and a combination of free‐software platforms. The comparative resolutions of three surface rendering programs were also determined using the sinuses, a human body, and a human wrist data files to compare the abilities of different software available for surface map generation of biomedical data. Data shows that 3D Slicer provided highest compatibility and surface resolution for anatomical 3D printing. Generated surface maps were then 3D printed via fused deposition modeling (FDM printing). In conclusion, a methodological approach that explains the production of anatomical models using entirely consumer‐grade, fused deposition modeling machines, and a combination of free software platforms is presented in this report. The methods outlined will facilitate the incorporation of 3D printed anatomical models in the classroom. Anat Sci Educ 10: 383–391. © 2017 American Association of Anatomists.     

A Three-Dimensional Print Model of the Pterygopalatine Fossa Significantly Enhances the Learning Experience

The pterygopalatine fossa (PPF) is a bilateral space deep within the skull that serves as a major neurovascular junction. However, its small volume and poor accessibility make it a difficult space to comprehend using two-dimensional illustrations and cadaveric dissections. A three-dimensional (3D) printed model of the PPF was developed as a visual and kinesthetic learning tool for completely visualizing the fossa, its boundaries, its communicating channels, and its neurovascular structures. The model was evaluated by analyzing student performance on pre- and post-quizzes and a student satisfaction survey based on the five-point Likert scale. The first cohort comprised of 88 students who had never before studied the PPF. The second cohort consisted of 30 students who were previously taught the PPF. Each cohort was randomly divided into a control group who were provided with a half skull and an intervention group that were provided with the 3D printed model. The intervention group performed significantly better on the post-quiz as compared to the control group in cohort I (P = 0.001); while not significant, it also improved learning in cohort II students (P = 0.124). Satisfaction surveys indicated that the intervention group found the 3D printed model to be significantly more useful (P < 0.05) as compared to the half skull used by the control group. Importantly, the effect sizes for cohorts I and II (0.504 and 0.581, respectively) validated the statistical results. Together, this study highlights the importance of 3D printed models as teaching tools in anatomy education.     

Effectiveness of three‐dimensional digital animation in teaching human anatomy in an authentic classroom context

Three‐dimensional (3D) digital animations were used to teach the human musculoskeletal system to first year kinesiology students. The purpose of this study was to assess the effectiveness of this method by comparing two groups from two different academic years during two of their official required anatomy examinations (trunk and upper limb assessments). During the upper limb section, the teacher used two‐dimensional (2D) drawings embedded into PowerPoint^® slides and 3D digital animations for the first group (2D group) and the second (3D group), respectively. The same 3D digital animations were used for both groups during the trunk section. The only difference between the two was the multimedia used to present the information during the upper limb section. The 2D group surprisingly outperformed the 3D group on the trunk assessment. On the upper limb assessment no difference in the scores on the overall anatomy examination was found. However, the 3D group outperformed the 2D group in questions requiring spatial ability. Data supported that 3D digital animations were effective instructional multimedia material tools in teaching human anatomy especially in recalling anatomical knowledge requiring spatial ability. The importance of evaluating the effectiveness of a new instructional material outside laboratory environment (e.g., after a complete semester and on official examinations) was discussed. Anat Sci Educ 7: 430–437. © 2014 American Association of Anatomists.     

Learning in Stereo: The Relationship Between Spatial Ability and 3D Digital Anatomy Models

Three-dimensional (3D) digital anatomical models show potential to demonstrate complex anatomical relationships; however, the literature is inconsistent as to whether they are effective in improving the anatomy performance, particularly for students with low spatial visualization ability (Vz). This study investigated the educational effectiveness of a 3D stereoscopic model of the pelvis, and the relationship between learning with 3D models and Vz. It was hypothesized that participants learning with a 3D pelvis model would outperform participants learning with a two-dimensional (2D) visualization or cadaveric specimen on a spatial anatomy test, particularly when comparing those with low Vz. Participants (n = 64) were stratified into three experimental groups, who each attended a learning session with either a 3D stereoscopic model (n = 21), 2D visualization (n = 21), or cadaveric specimen (n = 22) of the pelvis. Medical and pre-medical student participants completed a multiple-choice pre-test and post-test during their respective learning session, and a long-term retention (LTR) test 2 months later. Results showed no difference in anatomy test improvement or LTR performance between the experimental groups. A simple linear regression analysis showed that within the 3D group, participants with high Vz tended to retain more than those with low Vz on the LTR test (R² = 0.31, P = 0.01). The low Vz participants may be cognitively overloaded by the complex spatial cues from the 3D stereoscopic model. Results of this study should inform resource selection and curriculum design for health professional students, with attention to the impact of Vz on learning.     

Perspectives on Multi‐Material Craft in Basic Education

In Finland, the National Core Curriculum for basic education from 2014 discusses holistic and multi‐material craft, which includes technical work and textile work aiming to break down the gender‐based tradition in craft education. However, teachers have been confused about the concept of multi‐materiality; it has raised tension between textile work and technical work, and teachers have not found practical pedagogical solutions for teaching these subjects. In this systematic literature review, the main aim is to open the concept of multi‐materiality and give examples to implement multi‐materiality in craft during basic education. Twenty articles dealing with craft, multi‐materiality, material or materialisation formed the basis of the analysis. According to the results, the concept of multi‐materiality is open, it does not define the means by which the design and making process is supposed to be implemented or who is the actor. However, the clear impetus is non‐gender‐based and material‐free knowledge‐building and learning activities in craft education. The pedagogical examples presented in this article indicate that multi‐materiality is not an end itself. In advancing creativity, critical thinking, discovering and understanding of the technological and cultural world through multi‐materiality, student learning can have different starting points and can be implemented in diverse ways.     

Criss-cross heart three-dimensional printed models in medical education: A multicenter study on their value as a supporting tool to conventional imaging

The utility of three-dimensional (3D) printed models for medical education in complex congenital heart disease (CHD) is sparse and limited. The purpose of this study was to evaluate the utility of 3D printed models for medical education in criss-cross hearts covering a wide range of participants with different levels of knowledge and experience, from medical students, clinical fellows up to senior medical personnel. Study participants were enrolled from four dedicated imaging workshops developed between 2016 and 2019. The study design was a non-randomized cross-over study to evaluate 127 participants' level of understanding of the criss-cross heart anatomy. This was evaluated using the scores obtained following teaching with conventional images (echocardiography and magnetic resonance imaging) versus a 3D printed model learning approach. A significant improvement in anatomical knowledge of criss-cross heart anatomy was observed when comparing conventional imaging test scores to 3D printed model tests [76.9% (61.5%–87.8%) vs. 84.6% (76.9%–96.2%), P < 0.001]. The increase in the questionnaire marks was statistically significant across all academic groups (consultants in pediatric cardiology, fellows in pediatric cardiology, and medical students). Ninety-four percent (120) and 95.2% (121) of the participants agreed or strongly agreed, respectively, that 3D models helped them to better understand the medical images. Participants scored their overall satisfaction with the 3D printed models as 9.1 out of 10 points. In complex CHD such as criss-cross hearts, 3D printed replicas improve the understanding of cardiovascular anatomy. They enhanced the teaching experience especially when approaching medical students.     

A validated instrument measuring students' perceptions on plastinated and three-dimensional printed anatomy tools

Due to the modernization of the medical curriculum and technological advancements, anatomy education has evolved beyond cadaveric dissection alone. Plastination techniques, three-dimensional (3D) modeling, and 3D printing technologies have progressively gained importance. However, there are limited valid and reliable surveys to evaluate students' perceptions of these new anatomy tools. Hence, this study aimed to develop a validated instrument to measure students' learning satisfaction, self-efficacy, humanistic values, and perceived limitations of plastinated and 3D printed models. A 41-item survey (five-point Likert scale, 1 = strongly disagree to 5 = strongly agree) was administered to Year 1 undergraduate medical students following a randomized controlled crossover study that evaluated plastinated and 3D printed cardiac and neck models. Ninety-six responses were received, and a factor analysis was performed with the Kaiser–Meyer–Olkin sampling adequacy of 0.878. The confirmatory factor analysis yielded a 4-factor, 19 items model that had a good fit with the latent constructs of $x$² (147) = 211.568, P < 0.001, root mean square error of approximation = 0.068, root mean square residual = 0.064, comparative fit index = 0.946, and Tucker Lewis index = 0.937. The Cronbach's alpha for the individual factors ranged from 0.74 to 0.95, indicating good internal consistency. This demonstrated a psychometrically valid and reliable instrument to measure students' perceptions toward plastinated and 3D printed models.