Femtosecond laser cleaning of historical paper with sizing

Lasers have served as cleaning tools for historical objects and artworks for about 40 years. In many cases, superior results of laser cleaning were achieved with respect to traditional methods. In this technique, contaminations on the surface of the object are ablated by laser irradiation. In order to apply laser cleaning method to fragile materials such as paper made of cellulose or parchment, heat deposition to the bulk should be minimal, to prevent damage. In this work, it is demonstrated that laser pulses with femtosecond (fs) duration can exhibit non-thermal ablation of contaminants on paper samples. In particular, laser cleaning studies are concentrated on paper samples with sizing. Fs laser cleaning is performed on artificially soiled and aged samples, as well as on historical ones. The laser used in the experiments has pulse duration of 550 fs and 1030 nm center wavelength. The fluence of the laser is varied and the post-cleaning statuses of samples are investigated. The analyses are color changes, fiber integrity, chemical composition changes and mechanical strengths. These results show that fs lasers can be very efficient in cleaning paper samples, yielding minimal discoloration and no damage to fibers distinguishable on microscopic examination. The presence of sizing also provides further protection against possible side effects.     

First experiments for the use of microblasting technique with powdered cellulose as a new tool for dry cleaning artworks on paper

This research evaluates the use of microblasting technique with powdered cellulose as a new tool for dry cleaning documents. Different cleaning tests were conducted on three documents with different properties following this new approach and the results were compared to those obtained with traditional dry cleaning with erasers. In order to assess changes caused to the supports, the treated documents were examined both before and after cleaning with optical and 3D stereomicroscopy, SEM-EDS and spectrophotometry. The results allow the conclusion that microblasting with powdered cellulose is a feasible technique to remove surface dirt or grime on paper documents. This research proves that the new use of the technique does not entail changes to the surface properties of the treated supports. Moreover, powdered cellulose is chemically stable and compatible with paper documents, preventing negative long-term effects derived from the presence of rubber residues that may remain in paper fibres when using erasers in dry cleaning treatments.     

Assessment of the state of conservation of stone artworks after laser cleaning: comparison with conventional cleaning results on a two-decade follow up

The utilization of laser light to produce fine and selective cleaning of superficial deposits and encrustation from stones was originally proposed more than 20 years ago by John Asmus who performed pioneering trials of laser cleaning on stone façades in Venice, Cremona and Padua. The opportunity to collect stone samples from these sites allowed us to carry out an original study aimed at evaluating the conservation state of stone surfaces cleaned 10–20 years ago by means of three different techniques: Nd:YAG laser radiation, micron sandblasting and chemical pads. Samples of various stone types, as Istria limestone, Botticino limestone and Nanto sandstone were collected and examined by means of optical and SEM microscopy, FT/IR, and EDAX analyses. The results provided preliminary indications that the state of conservation of stone surfaces previously subjected to laser cleaning is generally better in comparison with those which concurrently underwent mechanical and chemical cleaning.     

Investigations regarding the behaviour of historic glass and its surface layers towards different wavelengths applied for laser cleaning

The application of lasers for the removal of superficial deposits from historic stained glass is a comparatively new field of scientific interest. Experimental studies concerning the behaviour of glass substrates and the corresponding superficial deposits towards different laser wavelengths were carried out. The experiments were performed using wavelengths of λ = 193 nm (ArF-Excimer), 308 nm (XeCl-Excimer), 355 nm (Nd:YAG third harmonic) and 1 064 nm (Nd:YAG fundamental) in comparison to λ = 248 nm (KrF-Excimer). This comparison is due to the fact that the present knowledge is based on the 248 nm wavelength. Specially prepared model glass samples representing the original fragments and samples of organic polymers (formerly used as a protective material for historic stained glasses) were used to study the effects of laser radiation and were subsequently characterised by optical microscopy.     

Documentation of cultural heritage using digital photogrammetry and laser scanning

Precise documentation of cultural heritage status is essential for its protection and scientific studies carried out during the restoration and renovation process. The close range photogrammetry has been used successfully for documentation of cultural heritage. With recent developments in computer and information technologies, this well-known traditional method has been replaced with digital close-range photogrammetry. This new method offers us new opportunities such as automatic orientation and measurement procedures, generation of 3D vector data, digital ortho-image and digital surface model. Terrestrial laser scanning is another technology that in recent years has become increasingly popular for documentation which provides very dense 3D points on an object surface with high accuracy. In addition, the 3D model and digital ortho-image can be easily generated using generated 3D point cloud and recorded digital images.     

Characteristics of Italian art restoration firms and factors influencing their adoption of laser technology

Given the limited number of studies on this topic, the aim of this study is to better understand the characteristics of art restoration firms in Italy, with particular reference to their use of innovative technologies such as laser technology. The paper is supported by a survey conducted in a sample of 100 companies. The factors that have led firms to adopt or resist the adoption of the laser were identified and analysed. The results show that the main determinants of laser adoption are collaborative activities between the firms and universities and specific requests made by public institutions to use this technology.