Robust sliding mode control of a DC/DC Boost converter with switching frequency regulation

This paper presents the design of a hysteresis band controller to regulate the switching frequency in a sliding mode controlled nonlinear Boost power converter. The proposed architecture relies on a piecewise linear modeling of the switching function behavior within the hysteresis band, and consists of a continuous-time integral-type controller that modifies the amplitude of the hysteresis band of the comparator in accordance with the error between the desired and the actually measured switching period. The study provides the dynamical models of the converter operating in sliding mode and the switching frequency control loop. Moreover, the design of the parameters of both the sliding mode control and the switching frequency controller guarantee the fulfilment of the desired output voltage regulation of the Boost converter and the steady state setting of the switching frequency with a known, taylored dynamics. A Boost power converter prototype has been built to validate the proposal. Experimental results confirm the predicted good performance of the controllers, as well as the robustness with respect to changes in the switching frequency reference and the system parameters.     

Finite-time stabilization of nonlinear time delay systems using LQR based sliding mode control

In this paper, we discussed the robust finite-time stability of conic type nonlinear systems with time varying delays. Some novel conditions are derived to design a linear quadratic regulator (LQR) based sliding mode control (SMC) by proposing an integral switching surface. The sufficient conditions are derived for the considered nonlinear system using Lyapunov–Krasovskii stability theory and linear matrix inequality (LMI) approach. The proposed conditions can be solved using some standard numerical packages. Finally, a practical example is provided to validate the advantages and effectiveness of the proposed results.     

Projective synchronization in fixed time for complex dynamical networks with nonidentical nodes via second-order sliding mode control strategy

This paper is concerned with the global projective synchronization in fixed time for complex dynamical networks (CDNs) with nonidentical nodes in the presence of disturbances. Firstly, in order to realize the fixed-time projective synchronization of CDNs with matched disturbances, the second-order sliding mode is established, and the global fixed-time reachability of sliding manifolds is analyzed. The fixed-time stability of the sliding mode dynamics is also proved analytically based on Lyapunov stability theory. Moreover, the fixed convergence time of both reaching and sliding mode phases can be adjusted to any desired values in advance by the choice of the designable parameters. Secondly, in order to realize the fixed-time projective synchronization of CDNs with mismatched disturbances, a super-twisting-like (STL) controller, which does not require the information of the derivative of the sliding variable, is designed, and the synchronization condition is addressed in terms of linear matrix inequalities (LMIs). By the proposed controllers, continuous control signals can be provided to reduce the chattering effect and improve the control accuracy. Finally, two numerical examples are given to demonstrate the validity of the theoretical results and the the feasibility of the proposed approaches.     

Adaptive fractional order sliding mode controller with neural estimator

In this study, an adaptive fractional order sliding mode controller with a neural estimator is proposed for a class of systems with nonlinear disturbances. Compared with traditional sliding mode controller, the new proposed fractional order sliding mode controller contains a fractional order term in the sliding surface. The fractional order sliding surface is used in adaptive laws which are derived in the framework of Lyapunov stability theory. The bound of the disturbances is estimated by a radial basis function neural network to relax the requirement of disturbance bound. To investigate the effectiveness of the proposed adaptive neural fractional order sliding mode controller, the methodology is applied to a Z-axis Micro-Electro-Mechanical System (MEMS) gyroscope to control the vibrating dynamics of the proof mass. Simulation results demonstrate that the proposed control system can improve tracking performance as well as parameter identification performance.     

Observer based sliding mode controller for vehicles with roll dynamics

In this work, considering the roll dynamics and actuator dynamics, an observer-based control scheme for a vehicle is proposed. The proposal considers a nonlinear higher order sliding mode observer to estimate unmeasurable lateral velocity, roll angle and roll velocity. Using the observer information, a controller based on block control with sliding mode technique is designed for the reference trajectory tracking of the lateral and yaw velocities of the vehicle. The stability of the complete closed-loop system including zero dynamics is analyzed. The effectiveness of the proposed scheme is demonstrated through CarSim simulations.     

Flatness-based adaptive sliding mode tracking control for a quadrotor with disturbances

In this paper, a flatness-based adaptive sliding mode control strategy is presented to solve the trajectory tracking problem of a quadrotor. According to the differential flatness theory, the typical under-actuated quadrotor dynamics is transformed into a fully-actuated one. Based on this model, backstepping sliding mode controllers are designed to solve the trajectory tracking problem. To improve the robustness to disturbances, extended state observers are applied as a feedforward compensation of disturbances. Moreover, considering the high-order dynamics and possible instability caused by large observer gains, the adaptive method is applied to compensate for the estimation error. The effectiveness of the proposed control scheme is verified in simulations.     

Neural dynamic sliding mode control of nonlinear systems with both matched and mismatched uncertainties

Mismatched uncertainty and chattering appear as two challenges in sliding mode control. To overcome the problem of mismatched uncertainty, multiple sliding surfaces with virtual inputs are proposed. Accordingly, we have proposed two new methods based on designed neural observer: sliding mode control (SMC) and dynamic sliding mode control (DSMC) methods. Although, the proposed SMC can significantly cope with the mismatched uncertainties, but it suffers from chattering phenomenon. The chattering problem can be removed in DSMC, because an integrator is placed before the system. This results in increased number of the system states. This new state can be identified with the proposed neural observer. Note that in both proposed approaches, the robust performance (invariance property) of system is reserved, even in the presence of mismatch uncertainties. Then, to have a valid comparison the proposed DSMC is also designed using loop transfer recovery observer (LTRO). This comparison shows the good performance of the DSMC based neural networks. Moreover, the upper bound of uncertainties is not used in SMC and DSMC controllers and also in the neural observer and LTRO, which is important in practical implementation. Finally, comparing the equations, one can see the simplicity of DSMC in concept and also in realization.     

Optimized sliding mode current controller for power converters with non-minimum phase nature

This paper proposes a unified method to design an optimized type of the hysteresis modulation-based sliding mode current controller for non-minimum phase power converters in continuous conduction mode. The traditional sliding mode controlled converters have a slow transient voltage response at heavy loads, a large overshoot at light loads and during abrupt output resistance variations. To solve these problems, an optimized feedback control scheme is used according to the output resistance to adjust the coefficients of the controller. The basic idea of this controller is to suggest a new way for reduction of the sensitivity function amplitude of the closed loop system. The presented approach is developed for three basic DC/DC converters; i.e. boost, buck-boost and quadratic boost converters. Generally, the certain advantages of the suggested control approach are: (i) a fast transient response can be achieved in heavy load conditions, (ii) the voltage overshoot can be effectively reduced during load variations; (iii) the transient voltage overshoot can be eliminated in light load conditions; (iv) the closed loop control sensitivity can be reduced and therefore, the performance specification of a control system can be improved compared with the conventional sliding mode current control. To show the reliability of the suggested control scheme, simulations and experimental results for the derived systems are developed. Several conditions are performed to confirm the effectiveness of the proposed controller.     

Sparsely distributed sliding mode control for interconnected systems

This paper proposes a framework for the design of sparsely distributed output feedback discrete-time sliding mode control (ODSMC) for interconnected systems. The major target here is to develop an observer based discrete-time sliding mode controller employing a sparsely distributed control network structure in which local controllers exploit some other sub-systems’ information as well as its own local information. As the local controllers/observers have access to some other sub-systems’ states, the control performance will be improved and the applicability region will be widened compared to the decentralised structure. As the first step, a stability condition is derived for the overall closed-loop system obtained from applying ODSMC to the underlying interconnected system, by assuming a priori known structure for the control/observer network. The developed LMI based controller design scheme provides the possibility to employ different information patterns such as fully distributed, sparsely distributed and decentralised patterns. In the second step, we propose a methodology to identify a sparse control/observer network structure with the least possible number of communication links that satisfies the stability condition given in the first step. The boundedness of the obtained overall closed-loop system is analysed and a bound is derived for the augmented system state which includes the closed-loop system state and the switching function.     

Real time implementation of indirect rotor flux oriented control of a five-phase induction motor with novel rotor resistance adaption using sliding mode observer

High performance multiphase motor drive requires precise knowledge of the state quantities and the machine parameters. Access to these state quantities is through measurement using sensors whose accuracy is paramount to achieve the performance level required by industrial applications. However, the problems of the parameters variations, inaccessibility to the measurement of some states, no-observability of the machine in some regions, the cost of the sensors and their lack of precision, make this very difficult task. To address these problems, it is necessary to resort to soft sensors through the design of observers and estimators. In multiphase induction motor drive, the observation problem arises especially for rotor flux that is not accessible for measurement. About the parameters variations, the rotor resistance and the stator resistance are the most critical parameters of the machine because their influence is crucial for the control and observation. The change in the resistances can be as large as 40–50% of the rated value, which may affect the control adversely. This paper develops a new structure of an adaptive sliding mode observer based on an online estimation of the rotor resistance value in order to avoid the effect of its variation in the rotor flux oriented control. The results show convergent (the errors in the transient and steady states are 5% and 1%, respectively) behavior of the drive using the proposed control scheme for large rotor resistance variation under loaded condition. The stability of the drive is proved using Lyapunov criteria. The simulation results are validated using real time implementation.     

Controller design for discrete-time hybrid linear parameter-varying systems with semi-Markov mode switching

The paper is concerned with the stability and stabilization problems for a family of hybrid linear parameter-varying systems with stochastic mode switching. The switching phenomenon is modeled by a semi-Markov stochastic process which is more generalized than a Markov stochastic process. With the construction of a Lyapunov function that depends on both the parameter variation and operating mode, numerical testable stability and stabilization criteria are established in the sense of σ-error mean square stability with the aid of some mathematical techniques that can eliminate the terms containing products of matrices. To test the effectiveness of the designed stabilizing controller, we apply the developed theoretical results to a numerical example.     

Super-twisting observer-based sliding mode control with fuzzy variable gains and its applications to fully-actuated hexarotors

In this paper, we consider the super-twisting observer-based sliding mode control algorithm with fuzzy variable gains (STOSMC) for the fully-actuated hexarotor. Our hexarotor has full actuation due to six titled propellers that allows to control position and orientation (attitude) simultaneously, and resolves the singularity problem of the rotational matrix by using the quaternion modeling framework. We show that the proposed STOSMC for the hexarotor guarantees finite-time convergence of the estimation error and asymptotic stability of the hexarotor. In simulations, we demonstrate the nonsingularity and fully-actuated control performance of the hexarotor by considering extreme position and attitude control scenarios. Moreover, the simulation results show that the hexarotor achieves the fast and precise tracking performance to the desired position and the desired attitude and the chattering phenomenon is reduced compared with the fixed-gains observer-based super-twisting sliding mode control due to the fuzzy mechanism.     

Novel integral sliding mode control for small-scale unmanned helicopters

Integral sliding mode (ISM) control which consists of a nominal control and a sliding-mode motion control, provides a nice framework for high tracking performance and good disturbance reduction. Our work develops ISM to attenuate the adverse effect of mismatched perturbations. By properly choosing sliding-manifold surface, the elimination of disturbances on control outputs enables to be achieved. Additionally, the chattering of sliding-mode control part is attenuated based on second-order sliding mode idea. Then, the proposed novel ISM control scheme is applied to address trajectory tracking problem for helicopters under perturbations. Approximated input-output linearization is implemented, such that the obtained linearized model is suitable for applying the proposed ism control. The stability of the closed-loop system for helicopter and its convergence to zeros of tracking errors are demonstrated by Lyapunov theory analysis. Several comparison simulations illustrate the effectiveness and superiority of the proposed methods.     

Adaptive sliding mode trajectory tracking control of robotic airships with parametric uncertainty and wind disturbance

An adaptive sliding mode trajectory tracking controller is developed for fully-actuated robotic airships with parametric uncertainties and unknown wind disturbances. Based on the trajectory tracking model of robotic airships, an adaptive sliding mode control strategy is proposed to ensure the asymptotic convergence of trajectory tracking errors and adaptive estimations. The crucial thinking involves an adaptive scheme for the controller gains to avoid the off-line tuning. Specially, the uncertain physical parameters and unknown wind disturbances are rejected by variable structure control, and boundary layer technique is employed to avoid the undesired control chattering phenomenon. Computer experiments are performed to demonstrate the performance and advantage of the proposed control method.     

Dissipative consensus problems for multi-agent networks via sliding mode control

In this paper, dissipative consensus problems are discussed for multi-agent networks. Firstly, sufficient conditions are proposed to ensure $(Q,S,R)?$dissipative consensus for multi-agent networks with external disturbances. Then, by designing an integral-type sliding surface function, a controller is obtained and the corresponding sufficient conditions are given to guarantee $(Q,S,R)?$dissipative consensus for multi-agent networks with external disturbances. Moreover, the sliding mode control law is formulated such that multi-agent networks drive onto the predefined surface in finite time. Finally, an example is given to illustrate the effectiveness of the obtained results.     

Adaptive fuzzy sliding mode command-filtered backstepping control for islanded PV microgrid with energy storage system

This study focuses on the control of islanded photovoltaic (PV) microgrid and design of a controller for PV system. Because the system operates in islanded mode, the reference voltage and frequency of AC bus are provided by the energy storage system. We mainly designed the controller for PV system in this study, and the control objective is to control the DC bus voltage and output current of PV system. First, a mathematical model of the PV system was set up. In the design of PV system controller, command-filtered backstepping control method was used to construct the virtual controller, and the final controller was designed by using sliding mode control. Considering the uncertainty of circuit parameters in the mathematical model and the unmodeled part of PV system, we have integrated adaptive control in the controller to achieve the on-line identification of component parameters of PV system. Moreover, fuzzy control was used to approximate the unmodeled part of the system. In addition, the projection operator guarantees the boundedness of adaptive estimation. Finally, the control effect of designed controller was verified by MATLAB/Simulink software. By comparing with the control results of proportion-integral (PI) and other controllers, the advanced design of controller was verified.     

Event-triggered sliding mode control of uncertain switched systems under denial-of-service attacks

This study is concerned with the event-triggered sliding mode control problem for a class of cyber-physical switched systems, in which the Denial-of-Service (DoS) attacks may randomly occur according to the Bernoulli distribution. A key issue is how to design the output feedback sliding mode control (SMC) law for guaranteeing the dynamical performance of the closed-loop system under DoS attacks. To this end, an event-triggered mechanism is firstly introduced to reduce the communication load, under which the measurement signal is transmitted only when a certain triggering condition is satisfied. An usable output signal for the controller is constructed to compensate the effect of unmeasured states and DoS attacks. And then, a dynamic output feedback sliding mode controller is designed by means of the attack probability and the compensated output signals. Both the reachability and the mean-square exponential stability of sliding mode dynamics are investigated and the corresponding sufficient conditions are obtained. Finally, some numerical simulation results are provided.     

Security control for Markov jump system with adversarial attacks and unknown transition rates via adaptive sliding mode technique

This paper is concerned with the security control problem for a class of Markov jump systems subject to false data injection attack and incomplete transition rates. An on-line estimation strategy is provided for the time-variant and unknown cyber-attack modes. And then, an adaptive sliding mode controller is synthesized with different robust terms for different modes to guarantee the reachability of the specified sliding surface. Moreover, the sufficient conditions for the stability of the closed-loop systems are derived. Finally, it is shown from simulation results that the effect of both false data injection attack and incomplete TRs can be effectively attenuated by the present adaptive SMC method.     

Lag synchronization for fractional-order memristive neural networks with time delay via switching jumps mismatch

This paper studies drive-response synchronization in fractional-order memristive neural networks (FMNNs) with switching jumps mismatch. A comparison theorem for fractional-order systems with variable order is provided first. Theories of fractional order Filippov differential inclusions are used to treat FMNNs because the parameters of FMNNs are state dependent and the FMNNs has discontinuous right hand sides. Based on Laplace transform and linear feedback control, some lag quasi-synchronization conditions are obtained with variable order α: 0?<?α?<?1 and 1?<?α?<?2. The error level is estimated and the larger synchronization regain is discussed. Finally, two numerical examples are presented to illustrate the effectiveness of our proposed theorems.