Population extremal optimization-based extended distributed model predictive load frequency control of multi-area interconnected power systems

How to design a set of optimal distributed load frequency controllers for a multi-area interconnected power system is an important but still challenging issue in the field of modern electric power systems. This paper presents an adaptive population extremal optimization-based extended distributed model predictive load frequency control method called PEO-EDMPC for a multi-area interconnected power system. The key idea behind the proposed method is formulating the dynamic load frequency control issue of each area power system as an extended distributed discrete-time state-space model based on an extended state vector, obtaining a distributed dynamic extended predictive model, and rolling optimization of real-time control output signal by adopting an adaptive population extremal optimization algorithm, where the fitness is evaluated by the weighted sum of square predicted errors and square future control values. The superiority of the proposed PEO-EDMPC method to a traditional distributed model predictive control method, a population extremal optimization-based distributed proportional-integral control algorithm and a traditional distributed integral control method is demonstrated by the simulation studies on two-area and three-area interconnected power systems in cases of normal, perturbed system parameters and dynamical load disturbances.     

Convexity of the Energy Domain

A basic theorem describing the convexity of the energy domain for the general family of linear time-invariant (active or passive, reciprocal or non-reciprocal, lumped or distributed, single variable or multivariable) physical system {T} is proved.Theorem: Let F = P + jQ represent the complex energy associated with any linear physical system T (n-port). For any specified excitation of frequency s and the family of constant energy content input signals {i:∥i∥= constant}, the point F describes a convex domain in the {P;Q} plane.Part I contains a mathematical and a network theoretic proof of the foregoing theorem. In Part II the geometric nature of the energy loci for the two-ports is examined. It is shown that for all two-ports with double eigenvalves the energy domain is circular. For two-ports with distinct eigenvalves, the convex energy domain is an ellipse. The geometric characterization of this elliptic domain is examined and examples verified by computer.The concept of convexity is frequently exploited in optimization of energy in electric power system and quadratic cost functions in control theory. In this respect the central theorem of this paper, its proof and geometric ramifications should prove to be of basic interest for all linear systems.     

基于“三流合一”视角的碳中和贡献力评价研究 ——以传统能源企业为例

针对学术界对于微观主体碳中和贡献的评价不足、维度单一化等问题，基于“三流合一”的研究视角，构建涵盖物质流、价值流和信息流三大系统维度共24项指标的企业碳中和贡献力评价指标体系；并采用熵值法、层次分析法与灰色关联分析法相结合的综合评价模型，选取传统能源企业为案例对象进行评估分析。结果表明：目前我国火电企业碳中和贡献力的不均衡发展问题突出，不同火电企业之间、同一火电企业内各系统维度间以及同一企业同一系统维度内各要素间均存在着明显差异。其中，物质流系统是主导性影响因素，但价值流和信息流系统的影响效果不可忽视。因此，传统能源企业应当充分调动市场、技术、金融等多元要素，促进碳素物质流、价值流与信息流系统的耦合，以提升碳中和行动的全面性与高效性。     

Modeling and stabilization of networked control systems with bounded packet dropouts and occasionally missing control inputs subject to multiple sampling periods

The paper is concerned with the modeling and stabilization problem of networked control systems under simultaneous consideration of bounded packet dropouts and occasionally missing control inputs. In particular, the focus of the paper is to capture the case where the packet dropouts and control inputs missing are subject to multiple sampling periods, and not periodic as in existing results. By input-delay approach and then fully considering the probability distribution characteristic of packet dropouts in the modeling, the original linear system is firstly transformed to a switched stochastic time-delay system. Meanwhile, the probability distribution values of stochastic delay taking values in m(m ≥ 2) given intervals can be explicitly obtained, which is of vital importance to analyse the stabilization problem of considered system. Secondly, by means of the average dwell time technique, some sufficient conditions in terms of linear matrix inequalities for the existence of desired stabilizing controller are derived. Finally, an illustrative example is given to illustrate the effectiveness of the proposed stabilizing controller and some less conservative results are obtained.     

Transmission capacity expansion planning with economic dispatching and flow evaluation

A new method based on statistical simulation for production costing, reliability evaluation and transmission expansion planning of electric power systems is developed. This method considers apparatus outage probabilities and load forecast uncertainties. Random numbers are generated, according to appropriate laws, to simulate the state of the apparatus and the demand of the bus loads. Through successive applications of the minimum cost-maximum flow algorithm, it is capable of handling the economic dispatch problem embodied in the procedures. An expansion algorithm is introduced, which selects the element with the highest full load ratio (FLR) for capacity addition. This method generates, as a byproduct, the expected power flow pattern which is valuable for power system planner. Application of the method is demonstrated using the IEEE five-bus test system.     

New extremal binary self-dual codes of length 66 as extensions of self-dual codes over Rk

We obtain extremal binary self-dual codes of parameters [64,32,12] as binary images of self-dual codes over R₁, R₂ and R₃ by employing different methods. We then apply the extension theorem to these codes to obtain a number of extremal binary self-dual codes of length 66 with trivial automorphism groups. Fifteen of the codes we obtain have new β$\beta$ values in W_66,3, of which only three were known to exist before. We also find nine codes with new β$\beta$ values in W_66,1, thus updating the list of such known codes.     

Bond graphs for thermal energy transport and entropy flow

The transport of thermal energy in thermodynamics is described as the product of entropy flow and of the absolute temperature, in analogy to the volume flow and pressure in oil hydraulics and to electric charge flow (= current) and voltage in electronics. Bond graphs are shown to be especially suitable to describe the splitting of applied thermal energy into internal energy and external mechanical work. Transformers and the 0- and 1-junctions of Paynter can illustrate various entropy flow processes, including Carnot engines and heat exchangers. Entropy flow in heat conduction is distinguished from entropy convection, or transport by moving mass, where the entropy/temperature characteristic or equation of state is important. Irreversibilities are represented by impedance transformers reducing temperature and increasing entropy flow but conserving power.     

基于ERA-Interim再分析数据的OE-W01区块波浪能资源评估

波浪能是一种重要的海洋可再生能源,开发利用波浪能资源可以有效地缓解常规能源短缺所带来的能源问题,波浪能资源分布状况的可靠评估是开发利用波浪能资源的前提条件。利用ECMWF ERA-Interim 1992-2011年0.75°×0.75°的较高精度的海浪场数据,计算了OE-W01区块(中国渤海、黄海及东海的部分区域)的波浪能流密度以及波能资源的可用度频率、富集度频率、变化指数等评价指标。对该海域的波浪能资源进行了全面评估。研究发现:渤海海域波浪能资源呈现非常明显的季节分布特征,秋冬季较丰富、春夏季较贫乏,秋冬季为波浪能资源的主要利用期,波浪能资源的相对富集区集中在渤海海峡以及渤海和黄海相连通的区域;黄海海域(包括东海部分海域)波浪能资源也呈现季节分布特征,与渤海不同,该海域90%的区域年平均波浪能流密度均在2kW/m以上,波浪能资源的可用范围较大,时间较长,波浪能资源的富集区集中在长江口东部海域以及舟山群岛东南部海域。在此基础上确定了波浪能资源的重点开发利用区,可为该海域的波浪能资源的开发利用提供参考依据。     

Estimate for the root-location of linear systems via the lyapunov matrix equation

It is well known that the Lyapunov matrix equation can be utilized to obtain the estimate for the transient behavior of linear constant systems. This paper shows that the equation gives information not only on the maximum real part of the characteristic roots of system matrix but also on other extremal values to these roots.     

Application of graph theory to the determination of potential energy of systems consisting of rigid bodies and springs

The process of determining the potential energy, as a function of generalized coordinates, of a system consisting of rigid bodies and springs is often extremely laborious. In this paper, a method is presented by means of which all the potential energy terms of a system are calculated in a systematic manner. It is assumed that the system of rigid bodies has a topological tree structure, and that linear springs are situated arbitrarily between the rigid bodies. The method is based on a graph-theoretical approach and is consistent with that of the calculation of kinetic energy presented in (2, J. Franklin Inst., Vol. 324, No. 3, pp. 351–367, 1987). The paper contains the derivation of general formulae for potential energies of gravity and elastic forces. These formulae are implemented for the case of a planar system; an example is also provided.     

Dynamic radial positioning of a hydrodynamically focused particle stream enabled by a three-dimensional microfluidic nozzle

The ability to confine flows and focus particle streams has become an integral component of the design of microfluidic systems for the analysis of a wide range of samples. Presented here is the implementation of a 3D microfluidic nozzle capable of both focusing particles as well as dynamically positioning those particles in selected flow lamina within the downstream analysis channel. Through the independent adjustment of the three sheath inlet flows, the nozzle controlled the size of a focused stream for 6, 10, and 15 μm polystyrene microparticles. Additional flow adjustment allowed the nozzle to dynamically position the focused particle stream to a specific area within the downstream channel. This unique ability provides additional capability and sample flexibility to the system. In order to gain insight into the fluidic behavior of the system, experimental conditions and results were duplicated within 4.75 μm using a COMSOL Multiphysics^® model to elucidate the structure, direction, proportion, and fate of fluid lamina throughout the nozzle region. The COMSOL Multiphysics model showed that the position and distribution of particles upon entering the nozzle have negligible influence over its focusing ability, extending the experimental results into a wider range of particle sizes and system flow rates. These results are promising for the application of this design to allow for a relatively simple, fast, fully fluidically controlled nozzle for selective particle focusing and positioning for further particle analysis and sorting.     

Heuristic maximization of the number of spanning trees in regular graphs

This paper deals with the problem of finding graphs (directed and undirected) maximizing the number of spanning trees among the regular graphs with the same number of nodes and edges. The approach is based on heuristic algorithms such as k-optimal and evolutionary. The emphasis is rather on checking whether these techniques are applicable to solving extremal graph problems than investigating generic structures of optimal graphs. For this reason circulant graphs, for which computationally effective tree counting formulas exist, are discussed first and then the results extended to cover the class of regular graphs.     

Stochastic synchronization of semi-Markovian jump chaotic Lur’e systems with packet dropouts subject to multiple sampling periods

This paper is concerned with the problem of stochastic synchronization for semi-Markovian jump chaotic Lur’e systems. Firstly, packet dropouts and multiple sampling periods are both considered. By input-delay approach and then fully considering the probability distribution characteristic of packet dropouts in the modeling, the original system is transformed to a stochastic time-delay system. Secondly, by getting the utmost out of the usable information on the actual sampling pattern, the probability distribution values of stochastic delay taking values in m given intervals can be explicitly obtained. Then, a newly augmented Lyapunov-Krasovskii functional is constructed. Based on that, some sufficient conditions in terms of linear matrix inequalities (LMIs) are derived to ensure the stochastic stability of the error system, and thus, the master system stochastically synchronize with the slave system. Finally, the effectiveness and potential of the obtained results is verified by a simulation example.     

Characteristics of character usage in Chinese Web searching

The use of non-English Web search engines has been prevalent. Given the popularity of Chinese Web searching and the unique characteristics of Chinese language, it is imperative to conduct studies with focuses on the analysis of Chinese Web search queries. In this paper, we report our research on the character usage of Chinese search logs from a Web search engine in Hong Kong. By examining the distribution of search query terms, we found that users tended to use more diversified terms and that the usage of characters in search queries was quite different from the character usage of general online information in Chinese. After studying the Zipf distribution of n-grams with different values of n, we found that the curve of unigram is the most curved one of all while the bigram curve follows the Zipf distribution best, and that the curves of n-grams with larger n (n = 3–6) had similar structures with β-values in the range of 0.66–0.86. The distribution of combined n-grams was also studied. All the analyses are performed on the data both before and after the removal of function terms and incomplete terms and similar findings are revealed. We believe the findings from this study have provided some insights into further research in non-English Web searching and will assist in the design of more effective Chinese Web search engines.     

A new optimized fuzzy FOPI-FOPD controller for automatic generation control of electric power systems

In the rapidly expanding size and complexity of the electricity network, automatic generation control (AGC) is contemplated to be the most remarkable option for offering good quality electric power supply to the end users. An AGC system entails highly vigorous, competent and intelligent control technique to deliver a healthy power under stochastic nature of consumers’ power demand. Hence, in this paper, a hybrid fuzzy fractional order proportional integral-fractional order proportional derivative (FFOPI-FOPD) controller is proposed as a new expert control technique to tackle AGC profitably in isolated and interconnected multi-area power systems. A recently developed imperialist competitive algorithm (ICA) is utilized for the optimization of the output gains (K_P/K_P1/K_I/K_D) and other parameters such as order of integrator (λ) and differentiator (μ) of FFOPI-FOPD controller exercising integral of squared error criterion. The proposed technique is firstly implemented on 1-area thermal system, then to express its potential and extensibility, the work is extended to 2-area hydro-thermal and 3-area thermal power systems widespread in the literature. The eminence of the method is betokened by comparing the results with the various newly published control methodologies and FPI/FFOPI controller designed in the study via ICA in terms of minimum values of various error criteria and undershoots/overshoots/settling times of frequency and tie-line power deviations following a sudden load demand in an area. The sensitivity analysis substantiates that the suggested controller is robust and performs staunchly under the wide variations in the system parameters, random load pattern and in the company of physical constraints to produce more clean electricity.     

A novel miniature dynamic microfluidic cell culture platform using electro-osmosis diode pumping

An electro-osmosis (EOS) diode pumping platform capable of culturing cells in fluidic cellular micro-environments particularly at low volume flow rates has been developed. Diode pumps have been shown to be a viable alternative to mechanically driven pumps. Typically electrokinetic micro-pumps were limited to low-concentration solutions (≤10 mM). In our approach, surface mount diodes were embedded along the sidewalls of a microchannel to rectify externally applied alternating current into pulsed direct current power across the diodes in order to generate EOS flows. This approach has for the first time generated flows at ultra-low flow rates (from 2.0 nl/s to 12.3 nl/s) in aqueous solutions with concentrations greater than 100 mM. The range of flow was generated by changing the electric field strength applied to the diodes from 0.5 Vpp/cm to 10 Vpp/cm. Embedding an additional diode on the upper surface of the enclosed microchannel increased flow rates further. We characterized the diode pump-driven fluidics in terms of intensities and frequencies of electric inputs, pH values of solutions, and solution types. As part of this study, we found that the growth of A549 human lung cancer cells was positively affected in the microfluidic diode pumping system. Though the chemical reaction compromised the fluidic control overtime, the system could be maintained fully functional over a long time if the solution was changed every hour. In conclusion, the advantage of miniature size and ability to accurately control fluids at ultra-low volume flow rates can make this diode pumping system attractive to lab-on-a-chip applications and biomedical engineering in vitro studies.     

Analysis of integrated STATCOM-SMES based on three-phase three-level multi-pulse voltage source inverter for high power utility applications

This paper is aimed to investigate the operating characteristics of a static synchronous compensator (STATCOM) integrated with superconducting magnetic energy storage (SMES) for high power applications in the transmission network level. The STATCOM controller topology comprises multi-level multi-pulse neutral-point clamped-type (NPC) voltage source inverters (VSIs) using the harmonics cancellation technique, and incorporates a SMES coil. An innovative two-quadrant multi-level dc-dc converter is proposed to effectively interface the STATCOM with the superconducting coil using a buck-boost topology with neutral point voltage control capabilities; thus enabling to simultaneously control both active and reactive power exchange with the high voltage power system. A detailed analysis of major system variables is presented, including analytical results and digital simulations using the MATLAB/Simulink environment. Moreover, a three-level control scheme is designed, including a full decoupled current control strategy in the d-q reference frame with a novel controller to prevent the STATCOM dc bus capacitors voltage drift/imbalance and an enhanced power system frequency controller.     

Investigation on CO(2) laser irradiation inducing glass strip peeling for microchannel formation

The study investigates the use of CO₂ laser to induce glass strip peeling off to form microchannels on soda lime gass substrate. The strip peeling exhibits a strong dependence on the energy deposition rate on the glass surface. In spite of the vast difference in the combination of laser power and scanning speed, when the ratio of the two makes the energy deposition rate in the range 3.0-6.0 J/(cm² s), the temperature rising inside glass will be above the strain point and reach the softening region of the glass. As a result, glass strip peeling is able to occur and form microchannels with dimensions of 20-40 μm in depth and 200-280 μm in width on the glass surface. Beyond this range, higher energy depsotion rate would lead to surface melting associated with solidification cracks and lower energy deposition rate causes the generation of fragment cracks.     

Nanoparticle image velocimetry at topologically structured surfaces

Nanoparticle image velocimetry (nano-PIV), based on total internal reflection fluorescent microscopy, is very useful to investigate fluid flows within ∼100 nm from a surface; but so far it has only been applied to flow over smooth surfaces. Here we show that it can also be applied to flow over a topologically structured surface, provided that the surface structures can be carefully configured not to disrupt the evanescent-wave illumination. We apply nano-PIV to quantify the flow velocity distribution over a polydimethylsiloxane surface, with a periodic gratinglike structure (with 215 nm height and 2 μm period) fabricated using our customized multilevel lithography method. The measured tracer displacement data are in good agreement with the computed theoretical values. These results demonstrate new possibilities to study the interactions between fluid flow and topologically structured surfaces.     

Maximum entropy method spectral estimation applied to power cable diagnostics via cepstrum processing

The Cepstrum processing method has been used on power cables (1, 2) for determining regions of damage. The method consists of: (1) observing the spectrum of an original broad band signal source, (2) introducing the signal into the cable, (3) computing the change in the observed spectrum (as a result of echos from regions of cable non-uniformity) when the signal is injected into the cable, and finally (4) computing the power-spectrum of the change in observed spectrum. A limitation of this technique is the use of band-limiting spectrum analyzers. Their limited bandwidth reduces range resolution estimation when used with the Fast Fourier Transform (FFT) technique. The maximum entropy method (MEM) is a more useful spectral estimator for this measurement technique. Examples are presented which show a comparison of the FFT and MEM techniques applied to practical cables.