填字游戏(英文)

8the past participle of misunderstand11the past participle of deal12the past participle of fight17the past participle of fly18the past participle of catch20the past participle of ride21the past participle of drive22the past participle of chooseDOWN1the past participle of wake2the past participle of cost4the past participle of sweep6the past participle of hide7the past participle of spill9the past participle of spoil10the past participle of shake13the past participle of forgive14the past partic…     

Effect of the amplification factor on seismic stability of expanded municipal solid waste landfills using the pseudo-dynamic method

The evaluation of the seismic stability of an expanded municipal solid waste （MSW） landfill is very important in seismic prone zones. In this paper, the pseudo-dynamic method was used to calculate the average safety factor for the expanded landfill with a trapezoidal berm based on under-berm failure conditions. Furthermore, the effects of the variation of parameters such as the amplification factor, seismic coefficient, height of berm, angle of back slope of berm, and depth of waste mass at the back slope on the seismic stability of the landfill were studied. The results indicated that the influences of the vertical seismic coefficient, height of berm, and angle of the back slope of the berm on the seismic stability of the landfill are weakened as the amplification factor increases, but the influence of the horizontal seismic coefficient on the seismic stability of the landfill is strengthened. On the other hand, a certain ratio of the height of the waste mass above the back slope to the depth of waste mass at the back slope, or the reasonable consideration of the magnitude of the amplification factor will be conducive to the seismic design of the landfill. In addition, the results obtained by the pseudo-static and pseudo-dynamic methods were compared.     

Does Physical Activity of Preschool Teachers Impact the Planning and Implementation of Movement Activities in the Kindergartens？

The authors of this paper compared the views of Slovenian and Portuguese preschool teachers about the importance of play and movement for the preschool children. In the paper, they focused on the question： Does physical activity of preschool teachers （spontaneous or planned） impact the planning and implementation of movement activities in their kindergarten group？ They also analyzed the influence of subjective theories on the planning of movement activities and the realization of the curriculum objectives in the field of movement. Most of the preschool teachers in Slovenia and Portugal give priority to natural forms of movement in nature and play, allowing the movement of the fingers, palms, and hands. Research has shown a link between physical activity of preschool teachers and their views on the importance of the implementation of the movement activities of preschool children. The authors also noted that the quality of the implementation of the education process in kindergartens in the area of movement activities depends on their subjective theories to a great extent and on the level of professional competence referred to the discussed topic.     

New Methods in Design Education： The Systemic Methodology and the Use of Sketch in the Conceptual Design Stage

This study describes the application of a new product concurrent design methodologies in the context in the education of industrial design. The use of the sketch has been utilized many times as a tool of creative expression especially in the conceptual design stage, in an intuitive way and a little out of the context of the reality needs that the design should be attended. This methodology systematizes and guides the process of sketching by means of a conceptual model and a geometric model toward a feasible solution, complementing the role of the sketch in the phase of a product conceptual design. The model describes its operating principles, as well as the phases of implementation in the context of teaching the industrial design illustrated with projects carried out in the workshop of conceptual design of the University Technical College of Valencia and University of the Bio-Bio, Chile. Finally, we discuss the implementation of the systemic models, their relation with the optimisation of the sketching process in the conceptual design stage, and their implications in the educational context.     

The Indirect Effect of the Internal Forces on the Linear Angular Momentum of A System of Particles

It is demonstrated that if the vector sum of the external forces and the total external torque are functions of all the positions and the velocities of the particles, the internal forces will affect indirectly the linear momentum and the angular momentum of a system of the particles through the and. In order to ensure that the internal forces have no effect on the and of the system, the external forces must be restricted to a linear function of and. Some examples which show that internal forces do affect the motion of the center of mass and the angular momentum of the system were discussed.     

Effects of a flexible joint on instability of a free-free jointed bipartite beam under the follower and transversal forces

This paper deals with the problem of the instability regions of a free-free flexible jointed bipartite beam under the follower and transversal forces as a realistic simulation of a two-stage aerospace structure. The aim of this study is to analyze the effects of the characteristics of a flexible joint on the beam instability to use maximum bearable propulsion force. A parametric study is conducted to investigate the effects of the stiffness and the location of the joint on the critical follower force by the Ritz method and the Newmark method, then to research the vibrational properties of the structure. It has been shown that the nature of instability is quite unpredictable and dependent on the stiffness and the location of the joint. The increase of the follower force or the transversal force will increase the vibration of the model and consequently cause a destructive phenomenon in the control system of the aerospace structure. Furthermore, this paper introduces a new concept of the parametric approach to analyze the characteristics effects of a flexible two-stage aerospace structure joint design.     

On Strategies for CE Translation of Tourist Materials

After making an analysis of the deficiencies of the present translation of tourist materials and discussion of the causes of the deficiencies in linguistic differences and cultural differences, the present paper proposes some practical translation methods of tourist materials with the help of the strategy of foreignization.     

Multistage Extractive Reaction for Hydrogen Peroxide Production by Anthraquinone Process

The extractive reaction process of oxygen-working solution-water three-phase system for the production of hydrogen peroxide by the anthraquinone method was investigated in a sieve plate column of 50 mm in internal diameter. The oxidation reaction of anthrahydroquinone in the working solution with oxygen and the extraction of hydrogen peroxide from the working solution into aqueous phase occurred simultaneously in the countercurrent mode. The agitating effect caused by gaseous phase made the droplets of the dispersed phase become smaller, thus, increasing the liquid-liquid interfacial contact areas and resulting in the improvement of the mass transfer velocity. Results showed that the gas-agitation had a beneficial effect on the extraction of hydrogen peroxide from the working solution into the aqueous phase： the concentration of hydrogen peroxide in the raffinate decreased with the increase of the gaseous superficial velocities： and the concentration of H2O2 in the raffinate increased with the increase of the dispersed phase superficial velocity at the same superficial velocity of the gaseous phase. In the G-L-L extractive reaction process, with the increase of the gaseous superficial velocities, both the conversion of the anthrahydroquinone oxidation and the extraction efficiency of hydrogen peroxide first increased significantly, then increased gradually.     

双栅极空气计数管的工作电压研究

Based on analysis of the discharging course in double grid air counter(DGAC),the dischargin model is built up by applying the conception of average ionizaing free path.An effective algorithm is presented for the working voltage of DGAC using this model.The working voltage is nearly related to the geometric parameters of DGAC,the sensitivity of the circuitry and the number of discharges,computing results confirm that the working voltage increases with the ratio of the radius of the anode to that of the cathode.The number of discharges follows the similar rule.     

A Study on Translation Approaches to Commercial Letters of Credit under the Guidance of Skopos Theory

According to the customs,by the end of 2011,the whole value of Chinese foreign trade is two thousand nine hundred and ninety four billion dollars,by the end of 2009,5 percents of the accounts of Chinese foreign trade with a value of fifty hundred billion dollars are unpaid.Most of the financial loss are caused by wrong translation of documents.The letter of credit is the most important way of payment in the international trade,so great attention should be paid to the translation of this type of document.Until now,the study against the translation of the letter of credit is scant.This paper will apply the skopos theory put forward by Hans Vermeer and developed in Germany in the late 1970s to guide the translation practice of the letter of credit.     

Flexural Capacity Formula of Diaphragm-Through Joints of Concrete-Filled Square Steel Tubular Columns

Finite element analysis and parametric studies were performed to investigate the flexural capacity of the panel zone of diaphragm-through joints between concretefilled square steel tubular columns and H-shaped steel beams.Through the comparisons of failure modes,load–displacement curves,and bearing capacity,it was found that the flexural capacity of the panel zone of diaphragmthrough joints was determined by the tensile action and influence of the web of H-shaped steel beams,and the axial load should be taken into account.The steel tube and the diaphragm were the major parts of the joint that resisted the bending moment.The contribution of in-filled concrete had little influence on the flexural capacity of the panel zone of the joint and could be neglected.According to the results of these numerical studies,a formula that considered the influence of the web of H-shaped steel beams and the axial load was developed based on the yield lines in the diaphragm and the steel tube.The results of the proposed formula were in good agreement with the numerical data of this investigation.     

Analysis of Private Higher Education in China

Considering the nature of education, the author holds that the fundamental function of education is to serve the customers, with relation to the internationalization of higher education in China. This paper illustrates the inevitability of development and the relative differences, by the discussion of benefit or non-benefit orientation of China＇s private higher education. It points out the direction of its development and the conjuncture of survival with the conclusion that the best option is development, provided the maintenance of our education sovereignty.     

Times Variations of Cinderella——on Evaluation of the Cinderella Complex

From the awakening and the development of feminism, to the formation of the Cinderella complex, much attention has been paid. As we know the reason of the popularity of Cinderella complex is patriarchal rule forces that reigns the world, the only way to remove this psychological problem is the reconstruction of the concept of gender relationship. This essay tries to find some reasons for the popularity of the Cinderella complex by some analysis of the developing of Cinderella mode and Cinderella complex, thus giving some measures.     

Research on control method for machining non-cylinder pin hole of piston

INTRODUCTION With the development of engine power and ro- tational speed, the load of pin hole of piston is more and more heavy. By analyzing the load of common cylindrical pin hole, the load of each part of the pin hole is asymmetric when the engine is working. The stress of inner side is the most and that of the outer side is the least. So, to improve engine performance, people reduce the stress concentration of the inner side of the pin hole by changing the geometric shape and improve …     

Internal force and deformation matrixes and their applications in load path

This paper deals with the internal force and the deformation matrixes, both of which can be used to analyze the topological relationship of a structure. Based on the reciprocal theorem, the relationship between the two matrixes is established, which greatly simplifies the computation of the internal force matrix. According to the characteristics of the internal force matrix, the transfer law of the matrix itself（due to the removal of components） is established based on the principle of linear superposition. With the relation of the two matrixes, the transfer law of the deformation matrix is also obtained. The transfer law illuminates the change regularity of internal force or deformation of the remnant structure when certain members are cut offone after another. The results of numerical examples show that the proposed methods are correct, reliable and effective.     

An Analysis on the Symbolic Meaning of the Green Light in The Great Gatsby

The Great Gatsby is considered the finest achievement of Fitzgerald’s literary career. The novel is successful for its narrative skill, graceful and delicate prose style, and especially, the employment of symbolism which contributes most to the depth and broadness of its theme. There is an abundance of images which are full of symbolic meaning through the whole story, among which the most important one is unquestionably the employment of "the green light". This paper, through analyzing the skillful employment of symbolism in the term of "the green light" in the novel, discusses the deep connotation that is imparted by the novelist and explains the decisive role of the symbolism of this term in the novel in shaping the figures, developing the plot of the story, and deepening the themes of the work.     

Analysis of Hamlet''''s Complex Character By Hamlet''''s Relationship with Other Major Characters

This paper is an attempt to reveal the complexity of the character of Hamlet in Shakespeare's tragedy—Hamlet and the importance of the role that his pretense of lunacy plays in the plot. The different sides of his personality are revealed by the analysis of some of Hamlet's behavior. The argument is also established that the hero's pretense of lunacy is a device in the plot which allows the full display of the character's complexity.     

A Study of Humor of The Actor’ s Lines in If You Are the One from the Perspective of Cooperative Principle

In the thesis the author explores the humor of the actor’ s lines in If You Are the One from the perspective of cooperative princi ple and its four maxims in the context of pragmatics.Through analyzing the purposeful violation of the maxims in the environment of the cooperation principle,the author intends to probe into the ways the actors figure out the implicature of humorous utterances and manage to carry on the conversation and the reproduction of the amusing effect.     

All-round Translation Teaching Approach Suitable for Adult Learners of the Open Distance Education

Through the analysis of the characteristics of the adult students in the open distance education and on the basis of constructivism,the researcher tentatively proposed an All-round Translation Teaching Approach under the guidance of the theories of constructivism in order to improve translation teaching of the open distance education.