Comparison of biomechanical characteristics between male and female elite fast bowlers

This study investigated ball release speed and performance kinematics between elite male and female cricket fast bowlers. Fifty-five kinematic parameters were collected for 20 male and 20 female elite fast bowlers. Group means were analysed statistically using an independent samples approach to identify differences. Significant differences were found between: ball release speed; run-up speed; the kinematics at back foot contact (BFC), front foot contact (FFC), and ball release (BR); and the timings between these key instants. These results indicate that the female bowlers generated less whole body linear momentum during the run-up than the males. The male bowlers also utilised a technique between BFC and FFC which more efficiently maintained linear momentum compared to the females. As a consequence of this difference in linear momentum at FFC, the females typically adopted a technique more akin to throwing where ball release speed was contributed to by both the whole body angular momentum and the large rotator muscles used to rotate the pelvis and torso segments about the longitudinal axis. This knowledge is likely to be useful in the coaching of female fast bowlers although future studies are required to understand the effects of anthropometric and strength constraints on fast bowling performance.     

The effect of coaching intervention on elite fast bowling technique over a two year period

Fast bowling in cricket is an activity that is well recognised as having high injury prevalence and there has been debate regarding the most effective fast bowling technique. The aim of this study was to determine whether two-year coaching interventions conducted in a group of elite young fast bowlers resulted in fast bowling technique alteration. Selected kinematics of the bowling action of 14 elite young fast bowlers were measured using an 18 camera Vicon Motion Analysis system before and after two-year coaching interventions that addressed specific elements of fast bowling technique. Mann-Whitney tests were used to determine whether any changes in kinematic variables occurred pre- and post-intervention between those who had the coaching interventions and those who didn't. The coaching interventions, when applied, resulted in a more side-on shoulder alignment at back foot contact (BFC) (p = 0.002) and decreased shoulder counter-rotation (p = 0.001) however, there was no difference in the degree of change in back and front knee flexion angles or lower trunk side-flexion. This study has clearly shown that specific aspects of fast bowling technique are changeable over a two-year period in elite level fast bowlers and this may be attributed to coaching intervention.     

The relationship between bowling action classification and three-dimensional lower trunk motion in fast bowlers in cricket

Abstract

Lower back injuries, specifically lumbar stress fractures, account for the most lost playing time in professional cricket. The aims of this study were to quantify the proportion of lower trunk motion used during the delivery stride of fast bowling and to examine the relationship between the current fast bowling action classification system and potentially injurious kinematics of the lower trunk. Three-dimensional kinematic data were collected from 50 male professional fast bowlers during a standing active range of motion trial and three fast bowling trials. A high percentage of the fast bowlers used a mixed bowling action attributable to having shoulder counter-rotation greater than 30°. The greatest proportion of lower trunk extension (26%), contralateral side-flexion (129%), and ipsilateral rotation (79%) was used during the front foot contact phase of the fast bowling delivery stride. There was no significant difference in the proportions of available lower trunk extension, contralateral side-flexion, and ipsilateral rotation range of motion used during fast bowling by mixed and non-mixed action bowlers. Motion of the lower trunk, particularly side-flexion, during front foot contact, in addition to variables previously known to be related to back injury (e.g. shoulder counter-rotation), should be examined in future cross-sectional and prospective studies examining the fast bowling action and low back injury.     

The relationship between bowling action classification and three-dimensional lower trunk motion in fast bowlers in cricket

Lower back injuries, specifically lumbar stress fractures, account for the most lost playing time in professional cricket. The aims of this study were to quantify the proportion of lower trunk motion used during the delivery stride of fast bowling and to examine the relationship between the current fast bowling action classification system and potentially injurious kinematics of the lower trunk. Three-dimensional kinematic data were collected from 50 male professional fast bowlers during a standing active range of motion trial and three fast bowling trials. A high percentage of the fast bowlers used a mixed bowling action attributable to having shoulder counter-rotation greater than 30 degrees. The greatest proportion of lower trunk extension (26%), contralateral side-flexion (129%), and ipsilateral rotation (79%) was used during the front foot contact phase of the fast bowling delivery stride. There was no significant difference in the proportions of available lower trunk extension, contralateral side-flexion, and ipsilateral rotation range of motion used during fast bowling by mixed and non-mixed action bowlers. Motion of the lower trunk, particularly side-flexion, during front foot contact, in addition to variables previously known to be related to back injury (e.g. shoulder counter-rotation), should be examined in future cross-sectional and prospective studies examining the fast bowling action and low back injury.     

Consistency of kinematic and kinetic patterns during a prolonged spell of cricket fast bowling: an exploratory laboratory study

Due to the high incidence of lumbar spine injury in fast bowlers, international cricket organisations advocate limits on workload for bowlers under 19 years of age in training/matches. The purpose of this study was to determine whether significant changes in either fast bowling technique or movement variability could be detected throughout a 10-over bowling spell that exceeded the recommended limit. Twenty-five junior male fast bowlers bowled at competition pace while three-dimensional kinematic and kinetic data were collected for the leading leg, trunk and bowling arm. Separate analyses for the mean and within-participant standard deviation of each variable were performed using repeated measures factorial analyses of variance and computation of effect sizes. No substantial changes were observed in mean values or variability of any kinematic, kinetic or performance variables, which instead revealed a high degree of consistency in kinematic and kinetic patterns. Therefore, the suggestion that exceeding the workload limit per spell causes technique- and loading-related changes associated with lumbar injury risk is not valid and cannot be used to justify the restriction of bowling workload. For injury prevention, the focus instead should be on the long-term effect of repeated spells and on the fast bowling technique itself.     

Movement patterns in cricket vary by both position and game format

Abstract

We compared the movement patterns of cricketers in different playing positions across three formats of cricket (Twenty20, One Day, multi-day matches). Cricket Australia Centre of Excellence cricketers (n = 42) from five positions (batting, fast bowling, spin bowling, wicketkeeping, and fielding) had their movement patterns (walk, jog, run, stride, and sprint) quantified by global positioning system (GPS) technology over two seasons. Marked differences in movement patterns were evident between positions and game formats, with fast bowlers undertaking the greatest workload of any position in cricket. Fast bowlers sprinted twice as often, covered over three times the distance sprinting, with much smaller work-to-recovery ratios than other positions. Fast bowlers during multi-day matches covered 22.6 ± 4.0 km (mean ± s) total distance in a day (1.4 ± 0.9 km in sprinting). In comparison, wicketkeepers rarely sprinted, despite still covering a daily total distance of 16.6 ± 2.1 km. Overall, One Day and Twenty20 cricket required ～50 to 100% more sprinting per hour than multi-day matches. However, multi-day cricket's longer duration resulted in 16–130% more sprinting per day. In summary, the shorter formats (Twenty20 and One Day) are more intensive per unit of time, but multi-day cricket has a greater overall physical load.     

Lumbo-pelvic loading during fast bowling in adolescent cricketers: The influence of bowling speed and technique

Abstract

This study aimed to assess changes in bowling technique and lumbar load over the course of a bowling spell in adolescent fast bowlers, and to investigate the relationship between lumbar loads during fast bowling and kinematic factors which have previously been associated with low back injury. Three-dimensional motion analysis was carried out on forty participants who performed an 8-over bowling spell. There were no significant changes in bowling technique or lumbar loads over the course of the spell. Bowling with a more extended front knee, faster ball release speed and increased shoulder counter-rotation were related to increased lumbo-pelvic loading – in particular peak transverse plane rotation moments and anterior-posterior shear forces. These lumbar loads may be a factor in low back injury aetiology and future studies should investigate the relationship between lumbar loading, injury incidence and other risk factors.     

Peak outward acceleration and ball release in cricket

The purpose of this study was to investigate the utility of peak outward acceleration (POA) measured from an inertial sensor worn at the wrist as an indicator of the critical end point of the bowling action – ball release, a critical element when assessing illegal actions. Twenty-one finger-spin and fast bowlers from nine countries were recruited from the ICC under-19 Cricket World Cup to take part in this research. Bowlers delivered a cross section of their standard deliveries while wearing an inertial sensor placed on their wrists. Ball release was determined by a validated motional analysis ball release (MABR) protocol and compared to the simultaneously collected POA. POA was shown to be highly correlated with MABR (R² = 0.98) and a Bland–Altman plot indicated that all 148 trials were within the 3.42 frame (0.014 s) limits of agreement. POA when measured by an inertial sensor worn on the wrist during bowling had a close relationship with an established method of identifying ball release in a biomechanical laboratory regardless of bowler and delivery type. Further, accuracy can be achieved with the adoption of a simple regression equation applied to the POA and as such is a valid measure of ball release in cricket bowlers.     

Motor unit firing frequency of lower limb muscles during an incremental slide board skating test

This study investigated how the combination of workload and fatigue affected the frequency components of muscle activation and possible recruitment priority of motor units during skating to exhaustion. Ten male competitive speed skaters performed an incremental maximal test on a slide board. Activation of six muscles from the right leg was recorded throughout the test. A time-frequency analysis was performed to compute overall, high, and low frequency bands from the whole signal at 10, 40, 70, and 90% of total test time. Overall activation increased for all muscles throughout the test (p < 0.05 and ES > 0.80). There was an increase in low frequency (90 vs. 10%, p = 0.035, ES = 1.06) and a decrease in high frequency (90 vs. 10%, p = 0.009, ES = 1.38, and 90 vs. 40%, p = 0.025, ES = 1.12) components of gluteus maximus. Strong correlations were found between the maximal cadence and vastus lateralis, gluteus maximus and gluteus medius activation at the end of the test. In conclusion, the incremental skating test lead to an increase in activation of lower limb muscles, but only gluteus maximus was sensitive to changes in frequency components, probably caused by a pronounced fatigue.     

中国女子板球投手投球技术的运动学比较

通过对2010年广州亚运会板球测试赛中国女队7名主力投手技术的高速影像解析,从球速、投球臂角速度、投球步落地位置和步长、落地时身体姿态、球出手瞬间关节角等方面分析比较中国女投手的各项投球技术。结果发现：不同类型投手之间技术特征差异性明显,快投手比旋转投手的落地到球出手时间短;好投手比差投手落地位置和空中姿态稳定性好。通过研究还发现部分投手存在球出手时膝关节弯曲、手臂弯曲等技术缺陷,以及前脚越过击球线等技术犯规错误,提醒在比赛中应引起注意。     

Bowling action and ball flight kinematics of conventional swing bowling in pathway and high-performance bowlers

ABSTRACT

When executed correctly, swing bowling has the potential to influence the outcome of a cricket match, yet little is known about the required bowling action and ball flight characteristics. This study aimed to describe the bowling action and initial ball flight characteristics as well as to identify variables that may be associated with increased swing in pathway and high-performance medium and fast pace bowlers. A 17-camera Vicon motion analysis system captured retro-reflective markers placed on the upper-body of participants and new cricket balls to quantify bowling action and initial ball flight kinematics. Bowlers delivered the ball with their forearm and hand angled in the direction of intended swing with an extended wrist flexing through the point of ball release. Bowlers who produced more swing had increased seam stability, possibly linked to a lower wrist and ball angular velocity. It is believed that swing increases with seam stability, however, optimal ranges may exist for seam azimuth angle, ball angular velocity and release speed. These findings may assist coaches to optimise the performance of bowlers, however, future research should use bowlers who play at higher levels to investigate swing bowling at greater speeds.     

The influence of elbow joint kinematics on wrist speed in cricket fast bowling

This modelling study sought to describe the relationships between elbow joint kinematics and wrist joint linear velocity in cricket fast bowlers, and to assess the sensitivity of wrist velocity to systematic manipulations of empirical joint kinematic profiles. A 12-camera Vicon motion analysis system operating at 250 Hz recorded the bowling actions of 12 high performance fast bowlers. Empirical elbow joint kinematic data were entered into a cricket bowling specific “Forward Kinematic Model” and then subsequently underwent fixed angle, angular offset and angle amplification manipulations. A combination of 20° flexion and 20° abduction at the elbow was shown to maximise wrist velocity within the experimental limits. An increased elbow flexion offset manipulation elicited an increase in wrist velocity. Amplification of elbow joint flexion–extension angular displacement indicated that, contrary to previous research, elbow extension range of motion and angular velocity at the time of ball release were negatively related to wrist velocity. Some relationships between manipulated joint angular waveforms and wrist velocity were non-linear, supporting the use of a model that accounts for the non-linear relationships between execution and outcome variables in assessing the relationships between elbow joint kinematics and wrist joint velocity in cricket fast bowlers.     

An evaluation of biomechanical measures of bowling action legality in cricket

Cricket bowling is traditionally thought to be a rigid-arm motion, allowing no elbow straightening during the delivery phase. Conversely, research has shown that a perfectly rigid arm through delivery is practically unattainable, which has led to rule changes over the past years. The current rule requires a bowler not to increase the elbow angle by more than 15°, thus requiring a measurement to confirm legality in “suspect” bowlers. The aims of this study were to evaluate whether the current rule is maintained over a range of bowlers and bowling styles, and to ascertain whether other kinematics measures may better differentiate between legal and suspect bowling actions. Eighty-three bowlers of varying pace were analysed using reflective markers and a high-speed (240 Hz) eight-camera motion analysis system in a laboratory. The change in elbow segment angle (minimum angle between the arm and forearm), the change in elbow extension angle with respect to the flexion–extension axis of a joint coordinate system, and the elbow extension angular velocity at ball release were measured. We found that bowlers generally bowled within a change in elbow extension angle of 15°. However, this limit was unable to differentiate groups of bowlers from those who were suspected of throwing in the past. Improved differentiation was attained using the elbow extension angular velocity at ball release. The elbow extension angular velocity at ball release may be conceptually more valid than the elbow extension angle in determining which bowlers use the velocity-contributing mechanisms of a throw. Also, a high value of elbow extension angular velocity at ball release may be related to the visual impression of throwing. Therefore, it is recommended that researchers and cricket legislators examine the feasibility of specifying a limit to the elbow extension angular velocity at ball release to determine bowling legality.     

Effects of modified-implement training on fast bowling in cricket

The effects of training with overweight and underweight cricket balls on fast-bowling speed and accuracy were investigated in senior club cricket bowlers randomly assigned to either a traditional (n = 9) or modified-implement training (n = 7) group. Both groups performed bowling training three times a week for 10 weeks. The traditional training group bowled only regulation cricket balls (156 g), whereas the modified-implement training group bowled a combination of overweight (161?-?181 g), underweight (151?-?131 g) and regulation cricket balls. A radar gun measured the speed of 18 consecutive deliveries for each bowler before, during and after the training period. Video recordings of the deliveries were also analysed to determine bowling accuracy in terms of first-bounce distance from the stumps. Bowling speed, which was initially 108?±?5 km?·?h^?1 (mean?±?standard deviation), increased in the modified-implement training group by 4.0 km?·?h^?1 and in the traditional training group by 1.3 km?·?h^?1 (difference, 2.7 km?·?h^?1; 90% confidence limits, 1.2 to 4.2 km?·?h^?1). For a minimum worthwhile change of 5 km?·?h^?1, the chances that the true effect on bowling speed was practically beneficial/trivial/harmful were 1.0/99/<?0.1%. For bowling accuracy, the chances were 1/48/51%. This modified-implement training programme is not a useful training strategy for club cricketers.     

Increased delivery stride length places greater loads on the ankle joint in elite male cricket fast bowlers

Abstract

The purpose of this study was to investigate the effect stride length has on ankle biomechanics of the leading leg with reference to the potential risk of injury in cricket fast bowlers. Ankle joint kinematic and kinetic data were collected from 51 male fast bowlers during the stance phase of the final delivery stride. The bowling cohort comprised national under-19, first class and international-level athletes. Bowlers were placed into either Short, Average or Long groups based on final stride length, allowing statistical differences to be measured. A multivariate analysis of variance with a Bonferroni post-hoc correction (α = 0.05) revealed significant differences between peak plantarflexion angles (Short-Long P = 0.005, Average and Long P = 0.04) and negative joint work (Average-Long P = 0.026). This study highlighted that during fast bowling the ankle joint of the leading leg experiences high forces under wide ranges of movement. As stride length increases, greater amounts of negative work and plantarflexion are experienced. These increases place greater loads on the ankle joint and move the foot into positions that make it more susceptible to injuries such as posterior impingement syndrome.     

An evaluation of biomechanical measures of bowling action legality in cricket

Cricket bowling is traditionally thought to be a rigid-arm motion, allowing no elbow straightening during the delivery phase. Conversely, research has shown that a perfectly rigid arm through delivery is practically unattainable, which has led to rule changes over the past years. The current rule requires a bowler not to increase the elbow angle by more than 15 degrees, thus requiring a measurement to confirm legality in "suspect" bowlers. The aims of this study were to evaluate whether the current rule is maintained over a range of bowlers and bowling styles, and to ascertain whether other kinematics measures may better differentiate between legal and suspect bowling actions. Eighty-three bowlers of varying pace were analysed using reflective markers and a high-speed (240 Hz) eight-camera motion analysis system in a laboratory. The change in elbow segment angle (minimum angle between the arm and forearm), the change in elbow extension angle with respect to the flexion-extension axis of a joint coordinate system, and the elbow extension angular velocity at ball release were measured. We found that bowlers generally bowled within a change in elbow extension angle of 15.5 degrees. However, this limit was unable to differentiate groups of bowlers from those who were suspected of throwing in the past. Improved differentiation was attained using the elbow extension angular velocity at ball release. The elbow extension angular velocity at ball release may be conceptually more valid than the elbow extension angle in determining which bowlers use the velocity-contributing mechanisms of a throw. Also, a high value of elbow extension angular velocity at ball release may be related to the visual impression of throwing. Therefore, it is recommended that researchers and cricket legislators examine the feasibility of specifying a limit to the elbow extension angular velocity at ball release to determine bowling legality.     

Effects of modified-implement training on fast bowling in cricket

The effects of training with overweight and underweight cricket balls on fast-bowling speed and accuracy were investigated in senior club cricket bowlers randomly assigned to either a traditional (n = 9) or modified-implement training (n = 7) group. Both groups performed bowling training three times a week for 10 weeks. The traditional training group bowled only regulation cricket balls (156 g), whereas the modified-implement training group bowled a combination of overweight (161-181 g), underweight (151-131 g) and regulation cricket balls. A radar gun measured the speed of 18 consecutive deliveries for each bowler before, during and after the training period. Video recordings of the deliveries were also analysed to determine bowling accuracy in terms of first-bounce distance from the stumps. Bowling speed, which was initially 108 +/- 5 km h(-1) (mean +/- standard deviation), increased in the modified-implement training group by 4.0 km x h(-1) and in the traditional training group by 1.3 km x h(-1) (difference, 2.7 km x h(-1); 90% confidence limits, 1.2 to 4.2 km x h(-1)). For a minimum worthwhile change of 5 km x h(-1), the chances that the true effect on bowling speed was practically beneficial/trivial/harmful were 1.0/99/< 0.1%. For bowling accuracy, the chances were 1/48/51%. This modified-implement training programme is not a useful training strategy for club cricketers.     

Bowling ball dynamics revealed by miniature wireless MEMS inertial measurement unit

This paper presents a novel sensor technology to deduce the dynamics of a bowling ball. The sensor, a miniature wireless inertial measurement unit (IMU), incorporates MEMS accelerometers and angular rate gyros, a microcontroller, a low power RF transceiver, and a rechargeable battery. When embedded in a bowling ball, the IMU transmits the acceleration and angular velocity data that define the dynamics of the ball starting with the bowler’s delivery and its motion in the lane. Example results from professional bowlers illustrate how this technology can be used to assess bowler skill and ball performance. For instance, the IMU accurately measures the spin dynamics of the ball which are crucial to develop the ball “hook.” An analysis of ball dynamics in the lane is distilled to a measurable “hook potential” metric for further assessing bowler skill. Finally, the sensor presented herein is believed to be the world’s smallest, wireless IMU. This highly miniaturized and wireless design will enable parallel training systems for many sports, including basketball, baseball, crew, cricket, golf, fly fishing, soccer, softball, tennis, rowing, among others.     

Specific tackling situations affect the biomechanical demands experienced by rugby union players

Tackling in Rugby Union is an open skill which can involve high-speed collisions and is the match event associated with the greatest proportion of injuries. This study aimed to analyse the biomechanics of rugby tackling under three conditions: from a stationary position, with dominant and non-dominant shoulder, and moving forward, with dominant shoulder. A specially devised contact simulator, a 50-kg punch bag instrumented with pressure sensors, was translated towards the tackler (n = 15) to evaluate the effect of laterality and tackling approach on the external loads absorbed by the tackler, on head and trunk motion, and on trunk muscle activities. Peak impact force was substantially higher in the stationary dominant (2.84 ± 0.74 kN) than in the stationary non-dominant condition (2.44 ± 0.64 kN), but lower than in the moving condition (3.40 ± 0.86 kN). Muscle activation started on average 300 ms before impact, with higher activation for impact-side trapezius and non-impact-side erector spinae and gluteus maximus muscles. Players’ technique for non-dominant-side tackles was less compliant with current coaching recommendations in terms of cervical motion (more neck flexion and lateral bending in the stationary non-dominant condition) and players could benefit from specific coaching focus on non-dominant-side tackles.     

Back injuries and the fast bowler in cricket

Here, I review research that has investigated the aetiology of injuries experienced by adolescent and adult fast bowlers. Mechanical factors play an important role in the aetiology of degenerative processes and injuries to the lumbar spine. This is particularly so in fast bowling, where a player must absorb vertical and horizontal components of the ground reaction force that are approximately five and two times body weight at front-foot and rear-foot impact, respectively. Attenuated forces are transmitted to the spine through the lower limb, while additional forces at the lumbo-sacral junction are caused by trunk hyperextension, lateral flexion and twisting during the delivery stride. Fast bowlers are classified as side-on, front-on or mixed. The mixed action is categorized by the lower body configuration of the front-on action and the upper body configuration of the side-on technique. This upper body configuration is produced by counter-rotation away from the batsman in the transverse plane about the longitudinal axis of the body of a line through the two shoulders. Counter-rotations of 12-40 degrees during a delivery stride have predicted an increased incidence of lumbar spondylolysis, disc abnormality and muscle injury in fast bowlers. During the delivery stride, the mixed bowling action also shows: more lateral flexion and hyperextension of the lumbar spine at front-foot impact, and a greater range of motion of the trunk over the delivery stride when compared with the side-on and front-on techniques. The pars interarticularis of each vertebra is vulnerable to injury if repetitive flexion, rotation and hyperextension are present in the activity. Fast bowlers should reduce shoulder counter-rotation during the delivery stride to reduce the incidence of back injuries. When a player is required to bowl for extended periods irrespective of technique, overuse is also related to an increased incidence of back injuries and must be avoided.