The influence of equipment variations on sliotar–hurley impact in the Irish game of hurling

The game of hurling is ranked as one of the fastest and most skilful field games in the world. It is played by a stick, hurley, made of ash wood and a ball, sliotar, made of a cork core or similar viscoelastic materials. Better standardisation of the game equipment requires analysing impacts to quantify precisely the effect of variations in equipment design on the resultant impact force at low and high striking speeds. Therefore, the purpose of the present study was to use a high-speed camera to (1) characterise the impact dynamics in term of impact force magnitude and duration, and (2) investigate whether a relationship exists between the game equipment and the magnitude of the impact force. An air cannon unit (ACU) test rig was set up to cause the sliotar to strike the hurley at predetermined speeds. A high-speed camera operating at 12,500 frames per second (fps) was used to capture 32 experimental impacts covering a range of sliotar and hurley brands, impact locations and impact speeds. The factor ??sliotar brand?? was identified as the most significant factor for the impact force among other main factors and two-factor interactions at a constant speed and it had a significant effect with up to 27?% difference between sliotar brands. It was demonstrated that, at higher impact speeds, the force?Cdeformation curves of the sliotar brands varied significantly, even though similar force?Cdeformation curves have been reported at quasi-static compression and similar COR values at low impact speeds using the standard free-drop test. This is the first known study to characterise the unique, highly non-linear and anisotropic sliotar?Churley impact using high-speed camera technology. It highlights the need for a tighter standard for sliotar materials and manufacturing to increase uniformity between different brands and strongly suggests that the standard free-drop test is not sufficient to characterise and compare game equipment.     

Dynamic behaviour of soils used for natural turf sports surfaces

The modulus and damping properties of soils in compression are a function of soil type, water content, stress history and loading rate. To model human–surface interaction with natural turf sports surfaces, stiffness and damping properties must be determined at dynamic loading rates. Two contrasting soil types, a Sand and a Clay Loam, commonly used in sports surfaces were loaded uniaxially to 2 kN at loading rates between 0.6 and 6 kN s⁻¹ in modified dynamic soil testing apparatus. Soils were compacted prior to loading but initial cycles resulted in viscoplastic deformation, with strain accumulation with repeated cycles of loading. Ultimately a resilient, viscoelastic steady-state equilibrium with loading was established. Resilient modulus and damping ratio varied with soil type, water content, stress history and increased significantly with loading rate. The resilient modulus of the Sand soil, typical of modern free-draining sand construction natural turf sports surfaces, was significantly greater than that of a Clay Loam soil more characteristic of traditional natural turf surfaces; reducing water content caused an increase in modulus and a decrease in damping ratio in the Clay Loam soil. Determination of these properties provides initial data for the modelling natural turf surface behaviour in terms of both ball and human interactions, with further research required to determine the effect of both grass roots and leaves on mechanical behaviour.     

A determination of the dynamic response of softballs

An apparatus is described for measuring the stiffness and coefficient of restitution (COR) of balls with application to softballs. While standardized test methods currently exist to measure these properties, they do not represent the displacement rate and magnitude that occur in play. The apparatus described herein involves impacting a fixed, solid cylindrical surface (matched to the diameter of the bat) with a ball and measuring the impact force during impact and speed of the ball before and after impact. The ratio of the ball speeds determines the COR, while the impact force is used to derive a ball stiffness. For an example of the contribution of the new ball test, the performance of hollow bats, which is sensitive to ball stiffness, was compared. Bat performance showed a much stronger dependence on the proposed ball stiffness than the traditional measure. Finally, it was shown that to achieve similar conditions between impacts with fixed and recoiling objects, the impact speed should be chosen so that the centre of mass energy was the same in the two cases. The method has application to associations wishing an improved method to regulate ball and bat performance.     

The static and dynamic stiffness behaviour of composite golf shafts and their constituent materials

Golf shafts are normally characterised using static or quasi-static tests, yet the golf swing itself is dynamic. The purpose of this research was to determine whether stiffness properties obtained from these tests can be used when modelling the dynamic behaviour of golf shafts made from carbon fibre reinforced polymer (CFRP). Three shafts, matched for all properties except shaft flex, were subjected to human swing testing by 12 skillful players whilst strains were recorded. Peak principal strains as well as strain rates increased as shaft flex decreased (p < 0.001). CFRP flat panels with lay-ups similar to those contained in the shafts were constructed and tested statically and at strain rates between 10⁻⁴ and 4 s⁻¹. Some level of strain-rate dependency was found for these panels, but only for strain rates exceeding those seen during a swing, which suggests that static material tests are appropriate for measuring the dynamic stiffness of golf shafts.     

广西壮族香火球运动的文化学分析

香火球运动是一项具有悠久历史,流行于广西壮族同胞生活中的少数民族传统体育活动,其源于广西南宁市良庆区古元坡村村民张元亨与其母艰苦生活的美丽传说。香火球运动极富地方民族特色,活动规则类似于现今的羽毛球,区别在于用手代替球拍击球。香火球运动延续了广西壮族同胞对火、祖先和英雄人物的崇拜,表现出坚韧与和谐共存的人文精神,以及明显的地域边缘文化色彩。香火球运动的传播应充分考虑全球化的时代特点和发展趋势,保留和发挥香火球文化中传统的精华部分,使香火球这一独特的壮族历史文化遗产日久常新。     

Describing the plastic deformation of aluminium softball bats

Hollow aluminium bats were introduced over 30 years ago to provide improved durability over wooden bats. Since their introduction, however, interest in hollow bats has focused almost exclusively around their hitting performance. The aim of this study was to take advantage of the progress that has been made in predicting bat performance using finite elements and apply it to describe bat durability. Accordingly, the plastic deformation from a ball impact of a single-wall aluminum bat was numerically modelled. The bat deformation from the finite-element analysis was then compared with experiment using a high-speed bat test machine. The ball was modelled as an isotropic, homogeneous, viscoelastic sphere. The viscoelastic parameters of the ball model were found from instrumented, high-speed, rigid-wall ball impacts. The rigid-wall ball impacts were modelled numerically and showed good agreement with the experimentally obtained response. The strain response of the combined bat-ball model was verified with a strain-gauged bat at intermediate ball impact speeds in the elastic range. The strain response of the bat-ball model exhibited positive correlation with the experimental measurements. High-speed bat-ball impacts were performed experimentally and simulated numerically at increasing impact speeds which induced correspondingly increased dent sizes in the bat. The plastic deformation from the numerical model found good agreement with experiment provided the aluminium work hardening and strain rate effects were appropriately described. The inclusion of strain rate effects was shown to have a significant effect on the bat deformations produced in the finite-element simulations. They also helped explain the existence of high bat stresses found in many performance models.     

The dynamic impact characteristics of tennis balls with tennis rackets

Abstract

The dynamic properties of six types of tennis balls were measured using a force platform and high-speed digital video images of ball impacts on rigidly clamped tennis rackets. It was found that the coefficient of restitution reduced with velocity for impacts on a rigid surface or with a rigidly clamped tennis racket. Pressurized balls had the highest coefficient of restitution, which decreased by 20% when punctured. Pressureless balls had a coefficient of restitution approaching that of a punctured ball at high speeds. The dynamic stiffness of the ball or the ball-racket system increased with velocity and pressurized balls had the highest stiffness, which decreased by 35% when punctured. The characteristics of pressureless balls were shown to be similar to those of punctured balls at high velocity and it was found that lowering the string tension produced a smaller range of stiffness or coefficient of restitution. It was hypothesized that players might consider high ball stiffness to imply a high coefficient of restitution. Plots of coefficient of restitution versus stiffness confirmed the relationship and it was found that, generally, pressurized balls had a higher coefficient of restitution and stiffness than pressureless balls. The players might perceive these parameters through a combination of sound, vibration and perception of ball speed off the racket.     

Understanding the effect of finger–ball friction on the handling performance of rugby balls

Handling errors are often seen in professional rugby games and even more so in amateur rugby. This paper analyses the problem of ball mishandling using high-speed video footage of passes and a bespoke finger friction rig. The high-speed video analysis showed that when the ball is caught, often there is a fluctuating movement of the fingers over the surface of the ball. It also showed that the fingers move over the surface of the ball when the ball is thrown, confirming that the dynamic friction is a good measure of how easily a ball can be handled. Rugby ball surface samples were used, on a finger friction rig, to assess the coefficient of friction between the finger and the balls. The currently manufactured balls displaying the highest coefficients of friction in clean, dry conditions were the design with square, ‘sharp’ pimples and also the design with a mixture of small and large pimples. The most consistent ball across wet and dry conditions was the ball with round, large, densely populated pimples. It was also shown that when water is added to the surface of the ball or finger, there was little variation in performance between the ball varieties.     

The dynamic impact characteristics of tennis balls with tennis rackets

The dynamic properties of six types of tennis balls were measured using a force platform and high-speed digital video images of ball impacts on rigidly clamped tennis rackets. It was found that the coefficient of restitution reduced with velocity for impacts on a rigid surface or with a rigidly clamped tennis racket. Pressurized balls had the highest coefficient of restitution, which decreased by 20% when punctured. Pressureless balls had a coefficient of restitution approaching that of a punctured ball at high speeds. The dynamic stiffness of the ball or the ball-racket system increased with velocity and pressurized balls had the highest stiffness, which decreased by 35% when punctured. The characteristics of pressureless balls were shown to be similar to those of punctured balls at high velocity and it was found that lowering the string tension produced a smaller range of stiffness or coefficient of restitution. It was hypothesized that players might consider high ball stiffness to imply a high coefficient of restitution. Plots of coefficient of restitution versus stiffness confirmed the relationship and it was found that, generally, pressurized balls had a higher coefficient of restitution and stiffness than pressureless balls. The players might perceive these parameters through a combination of sound, vibration and perception of ball speed off the racket.     

Acute effects of different warm-up protocols on highly skilled golfers’ drive performance

Previous research has highlighted the positive effect that different warm-up protocols have on golf performance (e.g. Sorbie et al., 2016; Tilley & Macfarlane, 2012) with the design of warm-ups and programmes targeting and improving golf performance through the activation and development of specific muscle groups. This study aimed to examine the acute effects of two warm-up protocols on golf drive performance in comparison to a control condition. Using a randomised counterbalanced design over three testing sessions, twenty-three highly skilled golfers completed the control, dynamic and resistance-band warm-up conditions. Following each condition, a GC2 launch monitor was used to record ball velocity and other launch parameters of ten shots hit with the participants’ own driver. A repeated-measures ANOVA found significant increases in ball velocity (η_p² = .217) between the control and both the dynamic and resistance-band warm-up conditions but no difference between these latter two, and a reduction in launch angle between control and dynamic conditions. The use of either a dynamic stretching or resistance-band warm-up can have acute benefits on ball velocity but golfers should liaise with a PGA Professional golf coach to effectively integrate this into their golf driving performance.     

从乒乓球运动的演变历程看传统武术的传承与发展

运用文献资料、逻辑推理、归纳演绎等方法,从分析乒乓球运动的规则、器材和技术的改进与发展及其从英国走向世界、进入奥运并成为我国"国球"的发展历程入手,揭示传统武术与现代体育间的差异;指出传统武术的传承与发展可遵循现代体育发展的基本规律,借鉴现代体育的优秀成果,建立传统武术传承和创新的发展体制,提高传统武术的地位,旨在找出新形势下传统武术传承和创新的发展关系,更好地为传统武术的发展服务.     

Effects of contrasting colour patterns of the ball in the volleyball reception

The effects of three different colour patterns on the surface of volleyballs (versus that of a plain white ball) on the behaviour of a reception player were examined by presenting sidespin volleyball serves. Expert (n = 10) and novice (n = 10) volleyball players intercepted volleyballs projected straight at them or at an initial angle of 9.5 degrees outwards but eventually curving towards the players' original position. In the latter trajectories, players generally took one or more steps laterally before returning to the landing position of the ball. These excursion patterns were significantly more pronounced with the white balls than the coloured balls. Differences between balls of different colour combinations were also observed. The first finding supports the thesis that next to a prospective type of control, such as on-line maintenance of a certain spatiotemporal relationship between the player and the ball, properties of the ball itself allow prediction of the future path of the ball. Differences between types of colour patterns are explained within the framework of the between-colours wavelength contrasts of each type of ball.     

理想的大学体育课程——太极柔力球

太极柔力球是世界上唯一的一个不以直接“碰撞击打”为特征的体育项目。融传统(太极)运动方式与现代竞技双重特征于一体,是一项集健身性、娱乐性、趣味性、竞技性、表演性、适应性和活动方式多样性于一身,易于推广和普及,具有发展前途的优秀体育项目。本文通过对太极柔力球运动价值及在教学中应注意的问题进行剖析,阐述其在普通高校开展的可行性,探索一条普通高校开展太极柔力球教学之路。     

Effects of contrasting colour patterns of the ball in the volleyball reception

The effects of three different colour patterns on the surface of volleyballs (versus that of a plain white ball) on the behaviour of a reception player were examined by presenting sidespin volleyball serves. Expert (n = 10) and novice (n = 10) volleyball players intercepted volleyballs projected straight at them or at an initial angle of 9.5° outwards but eventually curving towards the players' original position. In the latter trajectories, players generally took one or more steps laterally before returning to the landing position of the ball. These excursion patterns were significantly more pronounced with the white balls than the coloured balls. Differences between balls of different colour combinations were also observed. The first finding supports the thesis that next to a prospective type of control, such as on-line maintenance of a certain spatiotemporal relationship between the player and the ball, properties of the ball itself allow prediction of the future path of the ball. Differences between types of colour patterns are explained within the framework of the between-colours wavelength contrasts of each type of ball.     

How should “hot” players in basketball be defended? The use of fast-and-frugal heuristics by basketball coaches and players in response to streakiness

Previous research has shown that changes in shot difficulty may have rendered the hot-hand effect in basketball unobservable and are potentially a result of defensive adjustments. However, it has not been directly analysed whether strategic changes indeed take place in response to streakiness and whether they are effective with respect to winning games. The current work consists of an experimental study with 18 professional coaches and 20 players based on video sequences from National Basketball Association games, where the shown player displayed a streaky performance in half of the sequences. While coaches were asked to devise a defensive strategy after each viewed sequence, players had to assume the role of the shown player and decide whether to shoot or pass the ball. We find that coaches tended to increase the defensive pressure significantly more often on presumably hot players and thus make use of the hot-hand heuristic. Meanwhile, players chose to shoot more frequently in low-pressure and streaky situations but selected “pass” regardless of the previous performance when they faced increased defensive pressure. Assuming that a streaky player’s performance is indeed elevated during hot phases, hot-hand behaviour can be considered adaptive in certain situations as it led hot players to pass instead of shoot.     

Influence of football size on kicking performance in youth Australian rules footballers

In Australian rules football structured increases in ball size during development end with the transition to the Size 5 (adult) ball at the Under-15 age group. This study assessed changes in kick technique and performance in experienced junior performers when using Size 4 and 5 Australian rules footballs. Participants (n = 22, 13.77 ± 0.61 years) performed drop punt kicks in 2 representative tasks; a Decision-Making Test (DMT) (n = 14) and Set-Shot Test (SST) (n = 14 + 8). Results indicate participants sustained their level of kick performance (accuracy and quality of ball spin) in both tests when using a Size 5 football. Sustained kick performance in the DMT primarily resulted from adaptations to time-point technical measures at ball release. No significant differences were detected for technical measures between ball sizes in the SST. A dynamic kicking task (DMT) in combination with ball size manipulation may have placed greater demand on skill execution in comparison to a self-paced kicking task (SST). Results provide initial support for the utility of challenging representative dynamic and self-paced tasks, such as the DMT and SST used here for Australian football, for skill testing and practice in sport     

Head, eye and arm coordination in table tennis

The aim of this study was to determine the role of head, eye and arm movements during the execution of a table tennis forehand stroke. Three-dimensional kinematic analysis of line-of-gaze, arm and ball was used to describe visual and motor behaviour. Skilled and less skilled participants returned the ball to cued right or left target areas under three levels of temporal constraint: pre-, early- and late-cue conditions. In the pre- and early-cue conditions, both high and low skill participants tracked the ball early in flight and kept gaze stable on a location in advance of the ball before ball-bat contact. Skilled participants demonstrated an earlier onset of ball tracking and recorded higher performance accuracy than less skilled counterparts. The manipulation of cue condition showed the limits of adaptation to maintain accuracy on the target. Participants were able to accommodate the constraints imposed by the early-cue condition by using a shorter quiet eye duration, earlier quiet eye offset and reduced arm velocity at contact. In the late-cue condition, modifications to gaze, head and arm movements were not sufficient to preserve accuracy. The findings highlight the functional coupling between perception and action during time-constrained, goal-directed actions.     

Perception of spin and the interception of curved football trajectories

Using plain white and chequered footballs, we evaluated observers’ sensitivity to rotation direction and the effects of ball texture on interceptive behaviour. Experiment 1 demonstrated that the maximal distance at which observers (n = 8) could perceive the direction of ball rotation decreased when rotation frequency increased from 5 to 11 Hz. Detection threshold distances were nevertheless always larger for the chequered (decreasing from 47 to 28 m) than for the white (decreasing from 15 to 11 m) ball. In Experiment 2, participants (n = 7) moved laterally along a goal line to intercept the two balls launched with or without ±4.3 Hz sidespin from a 30-m distance. The chequered ball gave rise to shorter movement initiation times when trajectories curved outward (±6 m arrival positions) or did not curve (±2 m arrival positions). Inward curving trajectories, arriving at the same ±2 m distances from the participants as the non-curving trajectories, evoked initial movements in the wrong direction for both ball types, but the amplitude and duration of these reversal movements were attenuated for the chequered ball. We conclude that the early detection of rotation permitted by the chequered ball allowed modulation of interception behaviour without changing its qualitative characteristics.     

Softballs

There is currently much debate about the safety of the sport of softball. Batted‐ball speed and average pitcher reaction time are factors often used to determine safe performance. Batted‐ball speed is shown to be the most important factor to consider when determining safe play. Average pitcher reaction time is explained and directly correlated to batted‐ball speed. Eleven aluminum multi‐wall, three aluminum single‐wall and two composite softball bats were tested with mid‐compression polyurethane softballs averaging 1721 ±62 N/6.4 mm to represent the relative bat‐ball performance for the sport of slow‐pitch softball. Nine men and six women were chosen for this study out of a test group of over three hundred slowpitch softball players. On average, aluminum bat performance results were within the recommended safety limits established by the national softball associations. However, when composite bats were used, their performance results exceeded the recommended safety limits which can pose a significant safety risk. Using aluminum softball bats, batted‐ball speeds ranged from 80 to 145 km.h^‐1. Using composite softball bats, batted‐ball speeds ranged from 146 to 161 km.h^‐1. The scientific relevance of this study is to provide performance information that can lead to injury prevention in the sport of softball.