Phase analysis in maximal sprinting: an investigation of step-to-step technical changes between the initial acceleration,transition and maximal velocity phases

Abstract

The aim of this study was to investigate spatiotemporal and kinematic changes between the initial acceleration, transition and maximum velocity phases of a sprint. Sagittal plane kinematics from five experienced sprinters performing 50-m maximal sprints were collected using six HD-video cameras. Following manual digitising, spatiotemporal and kinematic variables at touchdown and toe-off were calculated. The start and end of the transition phase were identified using the step-to-step changes in centre of mass height and segment angles. Mean step-to-step changes of spatiotemporal and kinematic variables during each phase were calculated. Firstly, the study showed that if sufficient trials are available, step-to-step changes in shank and trunk angles might provide an appropriate measure to detect sprint phases in applied settings. However, given that changes in centre of mass height represent a more holistic measure, this was used to sub-divide the sprints into separate phases. Secondly, during the initial acceleration phase large step-to-step changes in touchdown kinematics were observed compared to the transition phase. At toe-off, step-to-step kinematic changes were consistent across the initial acceleration and transition phases before plateauing during the maximal velocity phase. These results provide coaches and practitioners with valuable insights into key differences between phases in maximal sprinting.     

Kinematic and kinetic differences in block and split-stance standing starts during 30 m sprint-running

Abstract

This study aimed to understand the kinematic and kinetic differences between two sprint starts: block and split-stance standing. Fourteen sub-elite male sprinters (100 m time: 11.40?±?0.39?s) performed block and split-stance standing starts sprints over 30 m of in-ground force platforms in a randomised order. Independent t-tests and repeated measures mixed model analysis of variance were used to analyse the between-condition variables across conditions, and over four step phases. Block start sprints resulted in significantly (p?<?.05) faster 5 m (5.0%, effect size [ES]?=?0.89) and 10?m (3.5%, ES?=?0.82) times, but no significant differences were found at 20 and 30?m. No significant differences were found in any kinematic measure between starting positions. However, block starts resulted in significantly (p?<?.001) greater propulsive impulses (6.8%, ES?=?1.35) and net anterior-posterior impulses (6.5%, ES?=?1.12) during steps 1–4, compared to the standing start. Block starts enable athletes to produce a greater amount of net anterior-posterior impulse during early accelerated sprinting, resulting in faster times up to 10 m. When seeking to improve initial acceleration performance, practitioners may wish to train athletes from a block start to improve horizontal force production.     

Power production of the lower limbs in flutter-kick swimming

This study aimed to compare the power produced by the flutter-kick action at different swimming velocities. Eighteen high-level male swimmers completed a maximal 15-m flutter-kicking sprint and underwent two tests (one passive and one with maximal flutter-kicking) in which they were towed at six velocities ranging from 1.0 to 2.0 m/s. Power values were computed for each velocity, and selected kinematic indices were evaluated at 1.2 and 2.0 m/s. The highest power (54 ± 8 W) was observed at the velocity at which the drag equaled the propulsive force (1.27 ± 0.08 m/s), which was similar to that recorded in the flutter-kicking sprint (1.26 ± 0.09 m/s). Thereafter, power decreased significantly with increasing velocity, up to 17 ± 10 W (at 2.0 m/s). The angle between the horizontal and the line connecting the highest and lowest points of the malleolus trajectory was significantly wider at 1.2 m/s than at 2.0 m/s (75 ± 4° vs. 63 ± 6°). This could explain the change of power with velocity because all the other kinematic indices considered were similar at the two velocities. These results suggest that the propulsive role of the flutter-kick increases as the swimming velocity decreases.     

Step-to-step spatiotemporal variables and ground reaction forces of intra-individual fastest sprinting in a single session

We aimed to investigate the step-to-step spatiotemporal variables and ground reaction forces during the acceleration phase for characterising intra-individual fastest sprinting within a single session. Step-to-step spatiotemporal variables and ground reaction forces produced by 15 male athletes were measured over a 50-m distance during repeated (three to five) 60-m sprints using a long force platform system. Differences in measured variables between the fastest and slowest trials were examined at each step until the 22nd step using a magnitude-based inferences approach. There were possibly–most likely higher running speed and step frequency (2nd to 22nd steps) and shorter support time (all steps) in the fastest trial than in the slowest trial. Moreover, for the fastest trial there were likely–very likely greater mean propulsive force during the initial four steps and possibly–very likely larger mean net anterior–posterior force until the 17th step. The current results demonstrate that better sprinting performance within a single session is probably achieved by 1) a high step frequency (except the initial step) with short support time at all steps, 2) exerting a greater mean propulsive force during initial acceleration, and 3) producing a greater mean net anterior–posterior force during initial and middle acceleration.     

Sprinting performance on the Woodway Curve 3.0TM is related to muscle architecture

Abstract

To determine if unilateral measures of muscle architecture in the rectus femoris (RF) and vastus lateralis (VL) were related to (and predictive of) sprinting speed and unilateral (and bilateral) force (FRC) and power (POW) during a 30 s maximal sprint on the Woodway Curve 3.0^TM non-motorized treadmill (TM). Twenty-eight healthy, physically active men (n = 14) and women (n = 14) (age = 22.9 ± 2.4 years; body mass = 77.1 ± 16.2 kg; height = 171.6 ± 11.2 cm; body-fa t = 19.4 ± 8.1%) completed one familiarization and one 30-s maximal sprint on the TM to obtain maximal sprinting speed, POW and FRC. Muscle thickness (MT), cross-sectional area (CSA) and echo intensity (ECHO) of the RF and VL in the dominant (DOM; determined by unilateral sprinting power) and non-dominant (ND) legs were measured via ultrasound. Pearson correlations indicated several significant (p < 0.05) relationships between sprinting performance [POW (peak, DOM and ND), FRC (peak, DOM, ND) and sprinting time] and muscle architecture. Stepwise regression indicated that POW_DOM was predictive of ipsilateral RF (MT and CSA) and VL (CSA and ECHO), while POW_ND was predictive of ipsilateral RF (MT and CSA) and VL (CSA); sprinting power/force asymmetry was not predictive of architecture asymmetry. Sprinting time was best predicted by peak power and peak force, though muscle quality (ECHO) and the bilateral percent difference in VL (CSA) were strong architectural predictors. Muscle architecture is related to (and predictive of) TM sprinting performance, while unilateral POW is predictive of ipsilateral architecture. However, the extent to which architecture and other factors (i.e. neuromuscular control and sprinting technique) affect TM performance remains unknown.     

Lower limb joint kinetics and ankle joint stiffness in the sprint start push-off

Sprint push-off technique is fundamental to sprint performance and joint stiffness has been identified as a performance-related variable during dynamic movements. However, joint stiffness for the push-off and its relationship with performance (times and velocities) has not been reported. The aim of this study was to quantify and explain lower limb net joint moments and mechanical powers, and ankle stiffness during the first stance phase of the push-off. One elite sprinter performed 10 maximal sprint starts. An automatic motion analysis system (CODA, 200 Hz) with synchronized force plates (Kistler, 1000 Hz) collected kinematic profiles at the hip, knee, and ankle and ground reaction forces, providing input for inverse dynamics analyses. The lower-limb joints predominately extended and revealed a proximal-to-distal sequential pattern of maximal extensor angular velocity and positive power production. Pearson correlations revealed relationships (P < 0.05) between ankle stiffness (5.93 ± 0.75 N x m x deg(-1)) and selected performance variables. Relationships between negative power phase ankle stiffness and horizontal (r = -0.79) and vertical (r = 0.74) centre of mass velocities were opposite in direction to the positive power phase ankle stiffness (horizontal: r = 0.85; vertical: r = -0.54). Thus ankle stiffness may affect the goals of the sprint push-off in different ways, depending on the phase of stance considered.     

The three-dimensional kinetic behaviour of the pelvic rotation in maximal sprint running

The purpose of this study was to investigate the effect of lumbosacral kinetics on sprinting. Twelve male sprinters performed 50 m sprints at maximal effort. Kinematic and ground reaction force data were recorded at approximately 40 m from sprint commencement. A whole-body inverse dynamics approach was applied to calculate joint forces and torques at the hip and lumbosacral joints. The contribution of the hips and lumbosacral joint torques to pelvic rotation was subsequently calculated, with joint force powers indicating the rate of mechanical energy transfer between segments across joint centres calculated for both hip joints. The kinetic analysis indicated that the lumbosacral torsional torque contributed significantly to pelvic rotation. Additionally, the pelvic rotation exerted anterior–posterior joint forces on the hips, contributing to the large positive joint force power at the hip of the stance leg. These hip joint force powers assisted in motion recovery during sprinting. In conclusion, the lumbosacral torsional torque might contribute to the recovery motion in sprinting through application of the anterior–posterior joint forces at the hip joints via pelvic rotation.     

Force-Time Characteristics and Running Velocity of Male Sprinters during the Acceleration Phase of Sprinting

Abstract

In an effort to investigate the force-time characteristics during the acceleration phase of the sprint start, eight male sprinters were used as subjects. Runs up to 3 m were analyzed from film, and force-time parameters were measured on a force platform. In a starting stance the reaction time of the group was .118 ± .016 s and the force production lasted .342 ± .022 s. The maximal resultant force at the moment of maximal horizontal force was 19.3 ± 2.2 N x kg¹, and the direction of the force was 32 ± 7°. In the very last instant before leaving the blocks the velocity of the center of gravity was 3.46 ± .32 m x s^?1. In the first contact after leaving the blocks there was a braking phase (.022 ± .005 s in duration) during which the average horizontal force was ?153 ± 67 N. The braking phase was observed despite the body center of gravity being horizontally ahead by .13 ± . 05 m with respect to the first contact point. The percentage of deceleration in running velocity during that phase was 4.8 ± 2.9%. In the propulsion phase the average horizontal force was great (526 ± 75 N), and it was produced for a relatively long time (.171 ± .035 s). Significant correlation coefficients were observed between force production and running velocity. These results suggest that braking/propulsion phases occur immediately after the block phase and that muscle strength strongly affects running velocity in the sprint start.     

The effect of individualised sprint training in elite female team sport athletes: A pilot study

ABSTRACT

This study aimed to evaluate whether an individualised sprint-training program was more effective in improving sprint performance in elite team-sport players compared to a generalised sprint-training program. Seventeen elite female handball players (23 ± 3 y, 177 ± 7 cm, 73 ± 6 kg) performed two weekly sprint training sessions over eight weeks in addition to their regular handball practice. An individualised training group (ITG, n = 9) performed a targeted sprint-training program based on their horizontal force-velocity profile from the pre-training test. Within ITG, players displaying the lowest, highest and mid-level force-velocity slope values relative to body mass were assigned to a resisted, an assisted or a mixed sprint-training program (resisted sprinting in the first half and assisted sprinting in the second half of the intervention period), respectively. A control group (CG, n = 8) performed a generalised sprint-training program. Both groups improved 30-m sprint performance by ~1% (small effect) and maximal velocity sprinting by ~2% (moderate effect). Trivial or small effect magnitudes were observed for mechanical outputs related to horizontal force- or power production. All between-group differences were trivial. In conclusion, individualised sprint-training was no more effective in improving sprint performance than a generalised sprint-training program.     

The relationship between mechanical stiffness and athletic performance markers in sub-elite footballers

This study investigated the relationship between several measures of lower-body stiffness and physical performance variables in 22 sub-elite male football players (mean ± SD; 21.9 ± 1.5 yr; 1.79 ± 0.06 m; 72.2 ± 7.2 kg). The participants were assessed for individual muscle stiffness of the Rectus Femoris (RF), Biceps Femoris (BF) and Medial Gastrocnemius (MG) muscles and vertical stiffness (Kvert) was also assessed assessed running acceleration, maximal sprint speed, agility, vertical jumping and muscular strength. Pearson’s correlations quantified the relationships and participants were also separated into relatively stiff (SG) and compliant groups (CG) for each variable. When ranked by Kvert the SG exhibited superior performance during sprinting, agility, jumping and strength (p ≤ 0.05) and when ranked by RF stiffness, SG exhibited superior sprint, agility and drop jump performance (p ≤ 0.05), while MG and BF stiffness were not related to performance. Higher stiffness appears to be beneficial to athletic performance for football players and therefore it may be beneficial for practitioners working with athletes that are required to perform dynamic activities to consider the contribution of stiffness to athletic performance.     

Comparative study between fully tethered and free swimming at different paces of swimming in front crawl

Tethered swimming is a method often used to measure or enhance the physical and technical resources of swimmers. Although it is highlighted that the technique used in tethered swimming is probably different from that used in free conditions, there are few comparative studies on this subject. The current study aims to compare fully tethered and free swimming based on kinematic hand parameters (orientation, velocity and acceleration of the hand, sweepback and angle of attack), which are known to act directly on the generation of propulsive forces. The results show that there are significant differences during the stretch and catch phases but less during the insweep and upsweep phases. Tethered swimming makes it possible to estimate the propelling forces generated by the hand in free swimming at distance and middle-distance paces, but overestimates it at sprint pace. However, in view of the modifications of the kinematic parameters, it should not be used under repeated conditions of use, such as for the development of swimmers’ capacity.     

Not quite so fast: effect of training at 90% sprint speed on maximal and repeated-sprint ability in soccer players

Abstract

The aim of the present study was to investigate the effect of training at an intensity eliciting 90% of maximal sprinting speed on maximal and repeated-sprint performance in soccer. It was hypothesised that sprint training at 90% of maximal velocity would improve soccer-related sprinting. Twenty-two junior club-level male and female soccer players (age 17 ± 1 year, body mass 64 ± 8 kg, body height 174 ± 8 cm) completed an intervention study where the training group (TG) replaced one of their weekly soccer training sessions with a repeated-sprint training session performed at 90% of maximal sprint speed, while the control group (CG) completed regular soccer training according to their teams’ original training plans. Countermovement jump, 12 × 20-m repeated-sprint, VO_2max and the Yo-Yo Intermittent Recovery Level 1 test were performed prior to and after a 9-week intervention period. No significant between-group differences were observed for any of the performance indices and effect magnitudes were trivial or small. Before rejecting the hypothesis, we recommend that future studies should perform intervention programmes with either stronger stimulus or at other times during the season where total training load is reduced.     

The Effects of Muscular Fatigue on the Kinetics of Sprint Running

Abstract

In order to compare the kinematic and kinetic effects of fatigue on the mechanics of sprint running, 15 male subjects were filmed in the saggital plane while performing a short (50 meter) maximal exertion sprint and a long (400 meter) fatiguing sprint. The short sprint was filmed at 40 meters, while the long sprint was filmed at 40 and 380 meters. The films were reduced utilizing a digitizer coupled to a computer terminal. Analysis results were generated via a human motion analysis program. Kinematic and kinetic results were entered into the statistical analysis as differences between non-fatigued and fatigued values. Initially, quality of the performance (measured by the change in horizontal velocity of the body center of gravity) was statistically related to change in the kinetic variable of integrated muscle moment at each of the body joints. The kinetic variables found to be significant were then statistically compared to logically related changes in kinematic variables (temporally adjacent or concurrent). Changes in the generated moments about the hip and knee during ground contact were found to be related to the quality of the performer. Kinematic changes related to the significant moment changes indicated that, while the better sprinter (smaller velocity loss) closely maintained the kinetic and kinematic patterns, the poorer sprinter (larger velocity loss) inefficiently deviated in both areas. The lack of significance between the changes in upper limb moments and change in average velocity indicated that productive arm effort does not affect the level of performance in the fatigued condition.     

Lower limb joint kinetics in the starting blocks and first stance in athletic sprinting

The aim of this study was to examine lower limb joint kinetics during the block and first stance phases in athletic sprinting. Ten male sprinters (100 m PB, 10.50 ± 0.27 s) performed maximal sprint starts from blocks. External force (1000 Hz) and three-dimensional kinematics (250 Hz) were recorded in both the block (utilising instrumented starting blocks) and subsequent first stance phases. Ankle, knee and hip resultant joint moment, power and work were calculated at the rear and front leg during the block phase and during first stance using inverse dynamics. Significantly (P < 0.05) greater peak moment, power and work were evident at the knee joint in the front block and during stance compared with the rear block. Ankle joint kinetic data significantly increased during stance compared with the front and rear block. The hip joint dominated leg extensor energy generation in the block phase (rear leg, 61 ± 10%; front leg, 64 ± 8%) but significantly reduced during stance (32 ± 9%), where the ankle contributed most (42 ± 6%). The current study provides novel insight into sprint start biomechanics and the contribution of the lower limb joints towards leg extensor energy generation.     

Correspondence

Abstract

Selected kinematic variables of the foot segments and the metatarsophalangeal (MTP) joint were investigated in relation to sprinting performance among 100 m sprint athletes at the 2000 Summer Olympic Games. It was hypothesized that the kinematics of the MTP joint, and forefoot and rearfoot segments, are related to sprint performance for both male and female athletes. Kinematic sagittal plane data were collected using two digital video cameras recording at 120 fields per second. It was determined that faster male sprinters experienced higher maximal rates of MTP extension, and faster female sprinters touch down with higher posterior sole angles and take off with lower posterior sole angles.     

Effects of resisted sprint training on sprinting ability and change of direction speed in professional soccer players

Resisted sprint training consists of performing overloaded sprints, which may produce greater effects than traditional sprint training. We compared a resisted sprint training with overload control versus an unresisted sprint training program on performance in soccer players. Eighteen elite athletes were randomly assigned to resisted (RST) or unresisted sprint training protocol (UR). Before and after a 6-week training period, sprinting ability, change of direction speed (COD), vertical jumps (SJ and CMJ), mean power (MP) and mean propulsive power (MPP) at distinct loads were assessed. Both groups improved sprinting ability at all distances evaluated (5m: UR = 8%, RST = 7%; 10m: UR = 5%, RST = 5%; 15m: UR = 4%, RST = 4%; 20m: UR = 3%, RST = 3%; 25m: UR = 2%, RST = 3%;), COD (UR = 6%; RST = 6%), SJ (UR = 15%; RST = 13%) and CMJ (UR = 15%; RST = 15%). Additionally, both groups increased MP and MPP at all loads evaluated. The between-group magnitude-based inference analysis demonstrated comparable improvement (“trivial” effect) in all variables tested. Finally, our findings support the effectiveness of a short-term training program involving squat jump exercise plus sprinting exercises to improve the performance of soccer players.     

Towards a wearable monitoring tool for in-field ice hockey skating performance analysis

Abstract

The capturing of movements by means of wearable sensors has become increasingly popular in order to obtain sport performance measures during training or competition. The purpose of the current study was to investigate the feasibility of using body worn accelerometers to identify previous highlighted performance related biomechanical changes in terms of substantial differences across skill levels and skating phases. Twenty-two ice hockey players of different caliber were equipped with two 3D accelerometers, located on the skate and the waist, as they performed 30 m forward skating sprints on an ice rink. Two measures of the temporal stride characteristics (contact time and stride time) and one measure of the propulsive power (stride propulsion) of a skating stride were calculated and checked for discriminating effects across (i) skill levels and (ii) sprint phases as well as for their (iii) strength of association with the sprint performance (total sprint time). High caliber players showed an increased stride propulsion (+22%, P?<?0.05) and shorter contact time (?5%, P?<?0.05). All three analysed variables highlighted substantial biomechanical differences between the accelerative and constant velocity phases (P?<?0.05). Stride propulsion of acceleration strides primarily correlated to total sprint time (r?=??0.57, P?<?0.05). The results demonstrate the potential of accelerometers to assess skating technique elements such as contact time or elements characterizing the propulsive power such as center of mass acceleration, to gauge skating performance. Thus, the findings of this study might contribute to establishing wearable sensors for in-field ice hockey skating performance analysis.     

Alterations to the orientation of the ground reaction force vector affect sprint acceleration performance in team sports athletes

A more horizontally oriented ground reaction force vector is related to higher levels of sprint acceleration performance across a range of athletes. However, the effects of acute experimental alterations to the force vector orientation within athletes are unknown. Fifteen male team sports athletes completed maximal effort 10-m accelerations in three conditions following different verbal instructions intended to manipulate the force vector orientation. Ground reaction forces (GRFs) were collected from the step nearest 5-m and stance leg kinematics at touchdown were also analysed to understand specific kinematic features of touchdown technique which may influence the consequent force vector orientation. Magnitude-based inferences were used to compare findings between conditions. There was a likely more horizontally oriented ground reaction force vector and a likely lower peak vertical force in the control condition compared with the experimental conditions. 10-m sprint time was very likely quickest in the control condition which confirmed the importance of force vector orientation for acceleration performance on a within-athlete basis. The stance leg kinematics revealed that a more horizontally oriented force vector during stance was preceded at touchdown by a likely more dorsiflexed ankle, a likely more flexed knee, and a possibly or likely greater hip extension velocity.     

The relationship between extension of the metatarsophalangeal joint and sprint time for 100 m Olympic athletes

Selected kinematic variables of the foot segments and the metatarsophalangeal (MTP) joint were investigated in relation to sprinting performance among 100 m sprint athletes at the 2000 Summer Olympic Games. It was hypothesized that the kinematics of the MTP joint, and forefoot and rearfoot segments, are related to sprint performance for both male and female athletes. Kinematic sagittal plane data were collected using two digital video cameras recording at 120 fields per second. It was determined that faster male sprinters experienced higher maximal rates of MTP extension, and faster female sprinters touch down with higher posterior sole angles and take off with lower posterior sole angles.