诺贝尔奖(英文)

I. INTRODUCTION Nobel Prizes, annual monetary (货币的) awards granted to individuals or institutions for outstanding contributions in the fields of physics, chemistry, physi ology or medicine, literature, international peace, and economic sciences. The Nobel Prizes are international ly recognized as the most prestigious (声望高的) awards in each of these fields. The prizes were estab lished by Swedish inventor and industrialist Alfred Bernhard Nobel, who set up a fund for them in his will. The first Nobel Prizes were awarded on December 10, 1901, the fifth anniversary (周年) of Nobel's death.     

Untitled

You might be crazy about Shakespeare's "Romeo and Juliet" as an English learner, but what do you think British teenagers studying Chinese are crazy about? Well, it's Cao Xueqin's classic, "The Dream of the Red Chamber". On December 18, nine British students arrived in Beijing for a seven-day trip after winning a 2006 Chinese Speaking Competition in Britain. More than 170 students from 36 secondary schools took part in that competition last month. It was organized by the British Council. Three of the students coming to Beijing won first prizes for Language Ability. The other six were first prize winners for a dramatic performance in Chinese entitled "A New Home for Lin Daiyu".     

Preparation of Glutaraldehyde Cross-Linked Chitosan Beads Under Microwave Irradiation and Properties of Urease Immobilized onto the Beads

The glutaraldehyde cross-linked chitosan beads were prepared under microwave irradiation and urease was immobilized onto the beads. The activity and the yield of enzyme activity of the immobilized urease were 10.83 U/g carrier and 47.7%, respectively. The optimum conditions of immobilization were 1% of glutaraldehyde volume fraction, 10 mg/g of urease/beads weight ratio, 24 h of the processing time and pH 6.5 of the reaction medium for immobilization. The properties of the immobilized urease were investigated and compared with those of the free enzyme. The optimum pH values were 6.5 and 7.0 for the immobilized and free urease, respectively. The optimum temperature was 60℃ for the free urease, while it shifted to 65 ℃ for the immobilized enzyme. The Michaelis constant Kr, was 9.1 mmol/L for the immobilized and 12.5 mmol/L for the free urease. The immobilized urease retained 40% of its initial enzyme activity even after 10 repeated uses. The immobilized urease stored at 4 ℃ retained 46% of its initial activity even after 35 d.     

Optimizing neural networks by genetic algorithms for predicting particulate matter concentration in summer in Beijing

We developed and tested an improved neural network to predict the average concentration of PM10 （particulate matter with diameter smaller than 10 μm） several hours in advance in summer in Beijing. A genetic algorithm optimization procedure for optimizing initial weights and thresholds of the neural network was also evaluated. This research was based upon the PM10 data from seven monitoring sites in Beijing urban region and meteorological observation data, which were recorded every 3 h during summer of 2002. Two neural network models were developed. Model I was built for predicting PM10 concentrations 3 h in advance while Model II for one day in advance. The predictions of both models were found to be consistent with observations. Percent errors in forecasting the numerical value were about 20%. This brings us to the conclusion that short-term fluctuations of PM10 concentrations in Beijing urban region in summer are to a large extent driven by meteorological conditions. Moreover, the predicted results of Model II were compared with the ones provided by the Models-3 Community Multiscale Air Quality （CMAQ） modeling system. The mean relative errors of both models were 0.21 and 0.26, respectively. The performance of the neural network model was similar to numerical models, when applied to short-time prediction of PM10 concentration.     

Where Is God?

A couple had two little boys,aged 8and 10,who were very naughty1.The twowere always getting into trouble and theirparents could be assured2 that if anymischief3 happened in their town their twosons were in some way involved4.     

Microstructure and creep properties of high Cr resisting weld metal alloyed with Co

A 9% Cr ferritic steel weld metal containing 1% Co, partially substituted for nickel, was prepared by submerged arc welding (SAW) processing. The microstructure and creep properties of the weld metal were investigated. The microstructure exhibited a fully tempered martensitic structure free of δ-ferrite. The creep properties of the obtained weld metal were inferior to those of the P92 base metal at 600 and 650 °C. The values of A and n for weld metal in the Norton power law constitution at 650 °C are 1.1×10?21 and 8.1, respectively.     

<Emphasis Type="Italic">Mrakia psychrophila</Emphasis> sp. nov., a new species isolated from Antarctic soil

The yeast strain （Y18） was isolated from a soil sample collected from Fildes Peninsula, Antarctica. The strain is a psychrophilic yeast with optimum and maximum growth temperatures of 10 ℃ and 18 ℃, respectively. Teliospores were formed after 7 d on malt agar, when the germination of teliospores was observed. Both inositol and D-glucuronate were assimilated. Positive results of the DBB （diazonium blue B） color reaction, urease test, and starch formation were observed. The major CoQ is Qs. All results indicated that Y18 belongs to the genes of Mrakia. The 18S rDNA sequence analyses showed that Y18 is closely related to Mrakiafrigida. DNA-DNA relatedness study, and some biochemistry characteristics indicated that Y18 represents a new species for which Mrakia psychrophila sp. nov. is proposed.     

Synthesis and Characterization of Three Pentacene Derivatives

The addition of substituents at the 6,13-position improved the solubility and stability of pentacene, making it possible to use the derivatives in spin coating of organic field-effect transistors(OFETs). Three pentacene derivatives, 6,13-bis(m-tolyl)pentacene(MP), 6,13-bis(4-butylphenyl)pentacene(BP), and 6,13-bis((4-butylphenyl)ethynyl)pentacene(BPEP) were synthesized, and their properties were investigated. 6,13-Pentacenequinone and organolithium were used in the preparation of 6,13-dihydropentacene at 0 ℃, and pentacene derivatives were synthesized with SnCl_2/HCl as reducing agent, to reduce 6,13-dihydropentacene at room temperature. The structure of the derivatives was characterized using NMR. The thermal stability, photochemical properties, and electronic structure of the three compounds were investigated using TGA, cyclic voltammetry, and UV–Vis. BPEP was also characterized using X-ray diffraction and atom force microscopy. BPEP was used to fabricate an OFET device using spin coating. The device showed a mobility of 0.07 cm~2 V s~(-1) at V_(th) =-10 V and I_(ON)/I _(OFF) = 10~2.     

“综合英语”(3)模拟试题

一、 Fill in the blanks with prepositions and adverbs.(10%)1.Your performance added greatly__their enjoyment__the party.2.Not satisfied__the man's answers,the police felt itnecessary to make further enquiry__the matter.3.I'm tired.I don't feel__going to the film tonight.4.I knew__your voice while you were some distance____the darkness.5.They were sensitive__her wishes and acted__the lookon her face,not__any principle.6.The workers were engaged__sorting__the apples__the bad.     

Study of structural,electrical and optical properties of vanadium oxide condensed films deposited by spray pyrolysis technique

Vanadium oxides condensed films are prepared on glass substrates, using spray pyrolysis （SP） technique. The effects of substrate temperature, vanadium concentra- tion in initial solution and the solution spray rate on the nano-structural, electrical, and optical properties of depos- ited films were investigated. Characterizations of the sam- ples were performed using X-ray diffraction （XRD）, scanning electron microscopy （SEM）, and UV-Vis spec- troscopy methods. The type and concentration of the charge carriers were determined and measured by Hall effect experiment. XRD patterns showed that the prepared films had polycrystalline structure, mostly tetragonal fl-V205 and V409 phases with the preferred orientation along （200） direction. The Hall effect experiment revealed that all samples were n-type, except the ones deposited at substrate temperatures Tsub ： 300 ~C and Tsub = 450 ~C, vanadium concentration 0.1 mol/L and solution spray rate 10 mL/min. The charge carrier concentrations obtained were in the range 1016-1018 cm-3. The lowest sheet resistance （R~） was obtained for the samples prepared at T~ub = 450 ~C, vana- dium concentration 0.05 mol/L and solution spray rate 10 mL/min. It was also found that the optical transparency of the samples changed from 20% to 75% and the optical bandgap of the samples was from 2.22 eV to 2.58 eV, depending on the deposition conditions.     

Immobilization of Aspergillus Oryzae Mycelium Pellets and Its Application in the Resolution of D, L-Alanine

Aspergillus oryzae 3042 mycelium pellets were immobilized by crosslinking method with reagents of gelatin and formaldehyde. An orthogonal design table was used to determine the optimal immobilization conditions. The L-aminoacylase activity of immobilized mycelium pellets under optimal conditions was assayed. The results show that the L-aminoacylase activity was 1 350 U·g-1. and the activity retention rate was 83%. The properties of the immobilized preparation were studied. Compared with free pellets, the appropriate pH of reaction system changed from 7.0 to 8.0, temperature changed from 52℃to 63℃, and the ranges of the optimum reaction conditions were all improved. The effect of Co2 on immobilized mycelium pellets was investigated and the favorable concentration was determined. When the immobilized preparation was used for the resolution of D, L-alanine in a packed bed reactor with 10 mm in diameter, 200 mm in height, the operational stability was increased, and the half-life period was 53 d. Thermal stability analysis shows that the immobilized pellets were more stable than the free pellets.     

Erratum to: Catalpol ameliorates LPS-induced endometritis by inhibiting inflammation and TLR4/NF-κB signaling

Erratum to:J Zhejiang Univ-Sci B(Biomed&Biotechnol)201920(10):816-827 https://doi.org/10.1631/jzus.B1900071The original version of this article unfortunately contained a mistake.In p.823,Figs.8 c and 8 d were incorrect,and the obvious pathological changes were mistakenly placed in the picture.     

Treating oil wastewater with pulse electro-coagulation flotation technology

Pulse electro-coagulation flotation was used to treat oil wastewater of high oil content. Different operational conditions were examined, including current density, reactive time, electrode distance, pH and pole switching time. Orthogonal tests were carried out to identify the optimal operational conditions for this technique. Considering the treatment cost and efficiency together the optimal operational conditions were an electrode distance of 3.3 cm, pH of 4, current density of 49.38 mA/cm2, reaction time of 15 min and pole switching time of 10 s. The removal efficiency of oil wastewater under normal conditions reached up to 96.21%. The influences of different factors on removal efficiency were in the following decreasing sequence： pH〉 current density 〉 pole switching time 〉 reactive time 〉 board distance.     

多孔超弹性矩形板中微孔的增长

The analyses of finite deformation and stress for a hyperelastic rectangular plate with some voids under an uniaxial extension were conducted. The governing differential equations were given from the incompressibility condition of the material. The solution was approximately obtained from the minimum potential energy principle. The growth of voids was discussed. One can see that an initial central circular-cylinder void becomes an elliptic-cylinder void, but an initial non-centeral circular-cylinder void becomes an elliptic-like cylinder void and the center of void has a shift. The stress distributions along the edges of voids were given and the phenomenon of stress concentration was observed. The influences of the distribution manner and size of voids, as well as the distance between them on the growth of voids were analyzed.     

EXPERIMENTAL INVESTIGATIONS ON PRESSURIZED FLUIDIZED BED COMBUSTION(PFBC)FOR HIGH ASH COAL

The first phase of the experimental investigation in our institute on pressur-ized fluidized bed combustion(PFBC)technology is introduced,and the results of fivetests are presented.The combustion efficiencies were as high as 97% 98% when high ashcontent coal was burnt in PFBC,and the sulphur retention efficiencics were 80%-85%with the Ca/S mole ratios between 1.5-1.8.The particulate content in flue gas at the out-let of high temperature gas clean-up system was 189mg/m~3(normalized).The average di-ameter of particles was 2.5-3μm and the weight fraction of particles with diameter largerthan 10μm was not greater than 3%.     

Effects of dietary supplementation with Clostridium butyricum on the growth performance and humoral immune response in Miichthys miiuy

The effects of dietary supplementation with Clostridium butyricum on growth performance and humoral immune response in Miichthys miiuy were evaluated. One hundred and fifty Miichthys miiuy weighing approximately 200-260 g were divided into five groups and reared in 15 tanks with closed circuiting culture system. The animals were fed 5 diets： basal diet only （control） or supplemented of the basal diet with C. butyricum at doses of 10^3 （CB1）, 10^5 （CB2）, 10^7 （CB3） or 10^9 （CB4） CFU/g. Compared with the control, the serum phenoloxidase activity was significantly increased by the supplementation （P〈0.05）, acid phosphatases activity was increased significantly （P〈0.05） at the doses of 10^9 CFU/g. Serum lysozyme activity peaked at dose of 10^7 CFU/g and in the skin mucus at dose of 10^9 CFU/g. Immunoglobulin M level in the serum and skin mucus was increased except at dose of 10^3 CFU/g （P〈0.05）. The growth at the dose of 10^9 CFU/g was higher than that of the control （P〈0.05）. It is concluded that supplementation of C. butyricum can mediate the humoral immune responses and improve the growth performance in Miichthys miiuy.     

Preparation of Long Afterglow PhotoluminescentMatedal SrAI2O4 ： Eu^2＋ , Dy^3 ＋ and ItsLuminescent Property

Long lasting strontium aluminate phosphors were synthesized by means of coated precipitation in the experiment. SrA12O4 monoclinic phase with long afterglow was synthesized at 1 100 ℃ with the aid of H3BO3,and the synthetic temperature decreased about 100 ℃-150 ℃ than in solid state reaction. The process of heat treatment was studied by TG-DTA. The phase compositions of powders were analyzed by XRD. The micrographs of the samples were investigated by SEM and the luminescent properties were researched by optical spectrum. The effects of H3 BO3 on the phase composition and microstructure of the calcined powders were investigated. The results indicated that H3BO3 accelerated the formation of SrAl2O4 by consuming the intermediate phase. The addition of Dy2O3 stimulated the afterglow property due to the increase in the depth of the trap center in the materials.     

不可压各向异性超弹性材料中的空穴生成

The cavitation problem in a solid sphere composed of an incompressible anisotropic hyper-elastic material under a univroms radial tensile dead load was examined.A new analytical solution was obtained.The stress contruibutions were given and the jumping and concentration of stresses were discussed.The stability of solutions and the effect of the degree of ainsotropy of the material were analyzed.     

Green Fluorescent Protein Recombinant Nisin as a Probe for Detection of Gram-Positive Bacteria

A great amount of foodborne pathogens were Gram-positive(G+) bacteria, a threat to public health. In this study, considering the binding ability of nisin towards G+ bacteria and the stable fluorescent ability of EGFP protein, a fluorescent nisin–EGFP protein probe was constructed by a gene engineering method. Nisin and EGFP were used as the receptor and fluorophore, respectively, to detect G+ bacteria. The nisin and egfp gene were amplified separately according to the sequence published in Gen Bank using unique primers. The two genes were cloned into a pET-28b(+) vector resulting in apET-28b(+)–nisin–egfp vector. The vector was transferred into Escherichia coli(E. coli) BL21(DE3) for expression. The expressed protein was extracted, purified by a Ni–NTA column, and then tested by the SDS-PAGE method to confirm its molecular weight. Listeria monocytogenes(L.monocytogenes), Staphylococcus aureus(S. aureus), and Micrococcus luteus(M. luteus) were used as the representations of G+ bacteria. E. coli O157, representing the gram-negative(G-) bacteria, was used as a negative control. The binding specificity of the recombinant protein was performed on two types of bacteria and then detected through fluorescent microscopy. The results indicated that the nisin–EGFP probe could detect G+ bacteria at 10~8CFU/mL.     

一步合成氧化铟液化气传感器

A liquefied petroleum gas （LPG） sensor with high selectivity, sensitivity and low power consumption has been developed based on indium oxide with very low resistance. Nanocrystalline In203 gas sensing materials were directly synthesized through a one-step controllable solvothermal process at 210 ℃ for 24 h, using InCI3.4H2O as the starting material, cetyltrimethyl ammonium bromide （CTAB） as additive and ethanol as the solvent. The obtained samples were characterized by X-ray diffraction （XRD）, and transmission electron microscopy （TEM）. The results showed that indium oxide takes on uniform cubic shape with range size of 10~30 nm and fine dispersivity. Gas sensitivity was measured in a mixing static gas. The results indicated that 3.0 V is the best working voltage of the sensor to LPG. Sensitivity is 12.6. The response-time and recovery-time are 3 s and 10 s respectively. Power consumption is only around 200 mW.