A generalized sinusoidal model and its applications

A physical model of sinusoidal function was established. It is generalized that the force is directly proportional to a power function of the distance in a classical spring-oscillator system. The differential equation of the generalized model was given Simulations were conducted with different power values. The results show that the solution of the generalized equation is a periodic function. The expressions of the amplitude and the period （frequency） of the generalized equation were derived by the physical method. All the simulation results coincide with the calculation results of the derived expressions. A special function also was deduced and proven to be convergent in the theoretical analysis. The limit value of the special function also was derived. The generalized model can be used in solving a type of differential equation and to generate periodic waveforms.     

Science Letters： Analytical solutions for a uniformly loaded circular plate with clamped edges

A bi-harmonic potential function was constructed in this study. Love solution was employed to obtain analytical solutions of uniformly loaded plates with two different types of clamped edges. The treatment of clamped boundary conditions was the same as that adopted by Timoshenko and Goodier （1970）. The analytical solution for the first type of clamped boundary condition is identical with that obtained by Luo et al.（2004）, and the solutions for both types were compared with the FEM results and the calculations of thin plate theory.     

Transverse Vibration Analysis of Concentrated Mass-Loaded Thin Circular Plate Based on Strcutural Circumferential Periodicity

The structural circumferential periodicity of inertial excitation produced by concentrated mass was utilized to establish the mathematical model of thin circular plate carrying eccentric concentrated mass and to analyze its transverse vibration. The fundamental frequency coefficient, natural frequency and mode shape function are determined by this method. A clamped thin circular plate was taken as an example to study the mass effect on the vibrating system.Comparison between the present results and published ones exhibits excellent agreement, which shows that the analytical method in this paper can be used to predict the transverse vibration parameters accurately.     

预测摄动平面非Hamilton系统混沌的解析方法

An analytical method for predicting chaos in perturbed planar non-Hamiltonian integrable systems with slowly varying parameters was developed.Based on the analysis of the geometric structure of unperturbed systems.the condition of transversely homoclinic intersection was given.The generalized Melnikov function of the perturbed system was fund by applying the theorem on the differentiability of ordinary differential equation solutions with respect to parameters.     

3D analytical solution for a rotating transversely isotropic annular plate of functionally graded materials

The analytical solution for an annular plate rotating at a constant angular velocity is derived by means of direct displacement method from the elasticity equations for axisymmetric problems of functionally graded transversely isotropic media. The displacement components are assumed as a linear combination of certain explicit functions of the radial coordinate, with seven undetermined coefficients being functions of the axial coordinate z. Seven equations governing these z-dependent functions are derived and solved by a progressive integrating scheme. The present solution can be degenerated into the solution of a rotating isotropic functionally graded annular plate. The solution also can be degenerated into that for transversely isotropic or isotropic homogeneous materials. Finally, a special case is considered and the effect of the material gradient index on the elastic field is illustrated numerically.     

Stress analysis of anisotropic thick laminates in cylindrical bending using a semi-analytical approach

Semi-analytical elasticity solutions for bending of angle-ply laminates in cylindrical bending are presented using the state-space-based differential quadrature method (SSDQM). Partial differential state equation is derived from the basic equations of elasticity based on the state space concept. Then, the differential quadrature (DQ) technique is introduced to discretize the longitu- dinal domain of the plate so that a series of ordinary differential state equations are obtained at the discrete points. Meanwhile, the edge constrained conditions are handled directly using the stress and displacement components without the Saint-Venant principle. The thickness domain is solved analytically based on the state space formalism along with the continuity conditions at interfaces. The present method is validated by comparing the results to the exact solutions of Pagano’s problem. Numerical results for fully clamped thick laminates are presented, and the influences of ply angle on stress distributions are discussed.     

Stochastic optimal control of first-passage failure for rectangular thin plate vibration model under gaussian white-noise excitations

A rectangular thin plate vibration model subjected to inplane stochastic excitation is simplified to a quasinonintegrable Hamiltonian system with two degrees of freedom. Subsequently a one-dimensional Ito? stochastic differential equation for the system is obtained by applying the stochastic averaging method for quasi-nonintegrable Hamiltonian systems. The conditional reliability function and conditional probability density are both gained by solving the backward Kolmogorov equation numerically. Finally, a stochastic optimal control model is proposed and solved. The numerical results show the effectiveness of this method.     

Subspace identification for continuous-time errors-in-variables model from sampled data

We study the subspace identification for the continuous-time errors-in-variables model from sampled data. First, the filtering approach is applied to handle the time-derivative problem inherent in continuous-time identification. The generalized Poisson moment functional is focused. A total least squares equation based on this filtering approach is derived. Inspired by the idea of discrete-time subspace identification based on principal component analysis, we develop two algorithms to deliver consistent estimates for the continuous-time errors-in-variables model by introducing two different instrumental variables. Order determination and other instrumental variables are discussed. The usefulness of the proposed algorithms is illustrated through numerical simulation.     

平面体波在各向异性媒质中的传播

Combining the linear transformation and the solution technique for the cubic equation,a general closed-form analyti solution for bulk waves in orthotropic anisotropic materials is obtained.This method is straightforward and general.Degenerated cases include transversely isotropic,cubic,and isotropic materials.Numerical computations are carried out on a fiber-reinforced composite plate modeled as a transversely isotropic media.The fibers are parallel to the top and bottom surfaces of the plate ,and they are rotated counterclockwise around the plate normal through different angles.The two-dimensional slowness curves corresponding to different rotations are presented graphically.The wave propagation characteristics displayed in slowness surfaces for different fiber orientation are analyzed.     

Stochastic Optimal Control of First-Passage Failure for Rectangular Thin Plate Vibration Model under Gaussian White-Noise Excitations

A rectangular thin plate vibration model subjected to inplane stochastic excitation is simplified to a quasinonintegrable Hamiltonian system with two degrees of freedom. Subsequently a one-dimensional Ito stochastic differential equation for the system is obtained by applying the stochastic averaging method for quasi-nonintegrable Hamiltonian systems. The conditional reliability function and conditional probability density are both gained by solving the backward Kolmogorov equation numerically. Finally, a ...     

对边固支另两边简支矩形薄板弯曲问题的哈密顿方法

利用哈密顿体系以及辛几何中的分离变量和本征函数展开的方法,给出了求解对边固支另两边简支的矩形薄板弯曲问题的方法,并通过实例计算和分析说明了该方法的正确性.     

利用功的互等法求解集中载荷作用下简支矩形厚板的弯曲问题

在本文中，功的互等法（RTM）被推广应用于求解基于Reissner理论的厚矩形板的弯曲问题，得到了在任意一点作用集中荷载矩形厚板弯曲问题的解析解，并给出了具有实价的计算结果。     

均布载荷作用下厚矩形板的弯曲

推广应用功的互等定理法(RTM)于求解基于Reissner理论的厚矩形板的弯曲问题，给出了二对边简支另两边固定厚矩形板在均布载荷作用下弯曲的精确解析解，并分析了解的数值结果．     

磁电弹性圆环板屈曲问题的哈密顿体系方法

运用哈密顿体系方法给出了磁电弹性圆环板屈曲问题的解析解,并对磁电弹性圆环板的纯弯曲问题进行了分析.算例结果表明,采用哈密顿体系方法求解磁电弹性圆环板屈曲问题非常方便快捷.     

功的互等法解静水压力作用下厚矩形板的弯曲

应用功的互等法(RTM)求解基于Reissner理论的厚矩形板的弯曲问题，给出了三边简支一边固定厚矩形板在静水压力作用下弯曲的封闭解析解，并给出了该种情况下的曲线图。     

复杂边界厚矩形板在静水压力作用下的弯曲

应用功的互等法（RTM）求解基于Reissner理论厚矩形板的弯曲问题,给出了对边简支另两边固定边界条件下厚矩形板在静水压力作用下弯曲的封闭解析解,并给出了该种情况下的曲线图.     

Analytical solutions for a uniformly loaded circular plate with clamped edges

INTRODUCTION The problem of circular plates subjected to auniform load is one of the classical problems in elas-ticity theory,which also is encountered frequently inpractice.Timoshenko and Goodier(1970)presented athree-dimensional solution for uniformly loaded iso-tropic circular plates with simply supported edges.Analytical solutions of isotropic circular plates witheither clamped or simply supported edges subjectedto a uniform load,which were derived based on thinplate theory with Kirch…     

Nonlinear vibration of circular plate with variable thickness

ＮｏｎｌｉｎｅａｒＶｉｂｒａｔｉｏｎｏｆＣｉｒｃｕｌａｒＰｌａｔｅｗｉｔｈＶａｒｉａｂｌｅＴｈｉｃｋｎｅｓＹｅＺｈｉｍｉｎｇ（ＳｈａｎｇｈａｉＩｎｓｔｉｔｕｔｅｏｆＡｐｐｌｉｅｄＭａｔｈｅｍａｔｉｃｓａｎｄＭｅｃｈａｎｉｃｓ）ＡｂｓｔｒａｃｔＴｈｉｓ...