New power system operational state estimation with cluster of electric vehicles

The access of distributed generation (DG) and a large number of electric vehicles (EVs) have changed the operation mode of power system. Its reliability and stability are facing more and more challenges. Therefore, it is very important to accurately estimate the state of the power system. This paper discusses a new power system state estimation method that is based on the shuffled frog leaping pigeon-inspired optimization algorithm (SFL-PIOA). Firstly, establish EV charging load model and distributed generation probability model (including photovoltaic power generation and wind power generation). Then, considering EVs and DG, the state estimation model of the new power system is built. The objective function and constraint conditions are established, and then the improved SFL-PIOA is used to solve the model. Finally, a simulation example is given to compare the improved algorithms (SFL-PIOA) to initial algorithm (PIOA). The results verify the feasibility and effectiveness of the improved method.     

Distributed dynamic state estimation with parameter identification for large-scale systems

In this paper, we consider a distributed dynamic state estimation problem for time-varying systems. Based on the distributed maximum a posteriori (MAP) estimation algorithm proposed in our previous study, which studies the linear measurement models of each subsystem, and by weakening the constraint condition as that each time-varying subsystem is observable, this paper proves that the error covariances of state estimation and prediction obtained from the improved algorithm are respectively positive definite and have upper bounds, which verifies the feasibility of this algorithm. We also use new weighting functions and time-varying exponential smoothing method to ensure the robustness and improve the forecast accuracy of the distributed state estimation method. At last, an example is used to demonstrate the effectiveness of the proposed algorithm together with the parameter identification.     

Robust state estimation for discrete time systems with colored noises and communication constraints

This paper investigates the state estimation problem for networked systems with colored noises and communication constraints. The colored noises are considered to be correlated to itself at other time steps, and communication constraints include two parts: (1) the information is quantized by a logarithmic quantizer before transmission, (2) only one node can access the network channel at each instant based on a specified media access protocol. A robust recursive estimator is designed under the condition of colored noises, quantization error and partially available measurements. The upper bound of the covariance of the estimation error is then derived and minimized by properly designing estimator gains. An illustrative example is finally given to demonstrate the effectiveness of the developed estimator.     

Robust extended fractional Kalman filter for nonlinear fractional system with missing measurements

Accurate and effective state estimation is essential for nonlinear fractional system, since it can provide some vital operation information about the system. However, inevitably missing measurements and additive uncertainty in the gain will affect the performance of estimation result. Thus, in this paper, in order to deal with these problems, a novel robust extended fractional Kalman filter (REFKF) is developed for states estimation of nonlinear fractional system, by which the states can be estimated accurately even with missing measurements. Finally, simulation results are provided to demonstrate that the proposed method can achieve much better estimation performance than the conventional extended fractional Kalman filter (EFKF).     

Three-stage Kalman filter for state and fault estimation of linear stochastic systems with unknown inputs

The paper studies the problem of simultaneously estimating the state and the fault of linear stochastic discrete-time varying systems with unknown inputs. The fault and the unknown inputs affect both the state and the output. However, if the dynamical evolution models of the fault and the unknown inputs are available the filtering problem will be solved by the Optimal three-stage Kalman Filter (OThSKF). The OThSKF is obtained after decoupling the covariance matrices of the Augmented state Kalman Filter (ASKF) using a three-stage U–V transformation. Nevertheless, if the fault and the unknown inputs models are not perfectly known the Robust three-stage Kalman Filter (RThSKF) will be applied to give an unbiased minimum-variance estimation. Finally, a numerical example is given in order to illustrate the proposed filters.     

Optimal adaptive reset control with guaranteed transient and steady state tracking error bounds

In this paper, a solution for improvement of transient performance in adaptive control of nonlinear systems is proposed. An optimal adaptive controller based on a reset mechanism and a prescribed performance bound is devised. The suggested controller has the structure of adaptive backstepping controller in which the estimated parameters are reset to an optimal value. The designed controller ensures both the transient bound and the asymptotical convergence of the states. It is shown that the tracking error satisfies the prescribed performance bound all the time, besides the speed of the convergence rate is increased by resetting the estimated parameters. The results have been proved through both the analytical and simulation studies. The proposed method is applied to an Augmented Quarter Car Model as a case study. Simulation results verify the established theoretical consequences that the prescribed performance bound based optimal adaptive reset controller can enhance the transient performance of the adaptive controller.     

Fault detection for DC-DC converters using adaptive parameter identification

As a clean and environmentally friendly renewable energy source, photovoltaic (PV) energy has attracted widespread attention. DC-DC converters are an essential component of all PV systems and it is vital for them to maintain normal function. Therefore, research on fault detection and identification in DC-DC converters is significant. This paper designs a new type of adaptive sliding mode observer, which realizes parameter estimation and fault detection of components by ensuring the consistent boundedness of parameter estimation errors. When the system fails, the parameter estimated value and actual value of the observer will generate a residual signal which can be analyzed and compared with the designed threshold value. If the threshold value is exceeded, the component will be diagnosed as malfunctioning. Finally, the effectiveness of the method is verified by a digital online simulation and hardware-in-the-loop simulation.     

Combined state and parameter estimation for a bilinear state space system with moving average noise

This paper considers the identification problem of bilinear systems with measurement noise in the form of the moving average model. In particular, we present an interactive estimation algorithm for unmeasurable states and parameters based on the hierarchical identification principle. For unknown states, we formulate a novel bilinear state observer from input-output measurements using the Kalman filter. Then a bilinear state observer based multi-innovation extended stochastic gradient (BSO-MI-ESG) algorithm is proposed to estimate the unknown system parameters. A linear filter is utilized to improve the parameter estimation accuracy and a filtering based BSO-MI-ESG algorithm is presented using the data filtering technique. In the numerical example, we illustrate the effectiveness of the proposed identification methods.     

Robust stable pole-placement-based adaptive control of continuous linear systems with two parametrical estimation schemes

This paper deals with the pole-placement-type robust adaptive control of continuous linear systems in the presence of bounded noise and a common class of unmodeled dynamics provided that two estimation schemes are used in parallel. Both estimation schemes are introduced in order to minimize the plant identification error by selecting, as plant parameter estimates, a convex combination of both parameter estimates which leads to the selection of one of the estimation schemes, via a switching rule, on time intervals of at least a minimum prefixed residence duration. The weights of the individual parameter vector estimates are provided at each time by an optimization or suboptimization scheme for a quadratic loss function of the possibly filtered tracking error and/or control input. The robust stability of the overall adaptive scheme is ensured by an adaptation relative dead zone which takes into account the contribution of the unmodeled dynamics and bounded noise. The basic results are derived for two different estimation strategies which have either a shared regressor with the plant or individual regressors for the input contribution and its contributed derivatives. In this second case, the plant input is obtained from a similar convex combination rule as the one used for the estimators in the first approach. An extension of the basic strategies is also pointed out including a combined use of the (sub) optimization scheme with a supervisor of past measures for the on-line calculation of the estimator weights in the convex combination. Finally, the extension of the scheme for the use of any number of parametrical estimators is focused on.     

Event-based state and fault estimation for stochastic nonlinear system with Markov packet dropout

This paper investigates the event-based state and fault estimation problem for stochastic nonlinear system with Markov packet dropout. By introducing the fictitious noise, the fault is augmented to the system state. Then combining the unscented Kalman filter (UKF) with event-triggered and Markov packet dropout, the modified UKF is proposed to estimate the state and fault. Meanwhile, the stochastic stability of the proposed filter is also discussed. Finally, two simulation results illustrate the performance of the proposed method.     

Parameter estimation for an input nonlinear state space system with time delay

This paper researches parameter estimation problems for an input nonlinear system with state time-delay. Combining the linear transformation and the property of the shift operator, the system is transformed into a bilinear parameter identification model. A gradient based and a least squares based iterative parameter estimation algorithms are presented for identifying the state time-delay system. The simulation results confirm that the proposed two algorithms are effective and the least squares based iterative algorithm has faster convergence rates than the gradient based iterative algorithm.     

Flatness-based adaptive fuzzy output tracking excitation control for power system generators

In this paper, a novel approach for the design of an indirect adaptive fuzzy output tracking excitation control of power system generators is proposed. The method is developed based on the concept of differentially flat systems through which the nonlinear system can be written in canonical form. The flatness-based adaptive fuzzy control methodology is used to design the excitation control signal of a single machine power system in order to track a reference trajectory for the generator angle. The considered power system can be written in the canonical form and the resulting excitation control signal is shown to be nonlinear. In case of unknown power system parameters due to abnormalities, the nonlinear functions appearing in the control signal are approximated using adaptive fuzzy systems. Simulation results show that the proposed controller can enhance the transient stability of the power system under a three-phase to ground fault occurring near the generator terminals.     

中继选择下的反馈错误分析和功率分配

提出一种分析中继选择反馈错误影响的方法,给出反馈错误与目的节点接收信噪比的近似表达式.基于该表达式,给出数据传输和信息反馈2个阶段的功率分配方案,以最大化数据传输速率的上界.仿真结果显示,所提功率分配方案能够有效提高数据传输速率,且表明有噪反馈下中继数量受到限制.     

Robust adaptive sliding mode control for uncertain discrete-time systems with time delay

This paper focuses on robust adaptive sliding mode control for discrete-time state-delay systems with mismatched uncertainties and external disturbances. The uncertainties and disturbances are assumed to be norm-bounded but the bound is not necessarily known. Sufficient conditions for the existence of linear sliding surfaces are derived within the linear matrix inequalities (LMIs) framework by employing the free weighting matrices proposed in He et al. (2008) [3], by which the corresponding adaptive controller is also designed to guarantee the state variables to converge into a residual set of the origin by estimating the unknown upper bound of the uncertainties and disturbances. Also, simulation results are presented to illustrate the effectiveness of the control strategy.     

Robust time-varying output formation tracking for heterogeneous multi-agent systems with adaptive event-triggered mechanism

This paper investigates the time-varying output formation tracking problem of heterogeneous multi-agent systems subjected to model uncertainties and external disturbances via adaptive event-triggered mechanism. Firstly, an adaptive distributed event-triggered observer is constructed to acquire the leader’s state and a time-varying formation output tracking controller utilizing sliding mode method is proposed to deal with the model uncertainties and external disturbances can be addressed. Secondly, an algorithm is given to claim the design procedures of the event-triggered based controller and asymptotic convergence of the controller is proved based on Lyapunov theory. Thirdly, Zeno-behavior is proved to be excluded strictly. Finally, a numerical example is given to illustrate the effectiveness of the proposed algorithm.     

High-gain observer with sliding mode for nonlinear state estimation and fault reconstruction

This paper develops a high gain observer with multiple sliding modes for simultaneous state and fault estimations for MIMO nonlinear systems. The novelty lies in the observer design that employs the combination of high-gain observer and sliding mode observer. The proposed observer does not impose the small-Lipschitz-constant condition on the system nonlinearity. By imposing a structural assumption on the nonlinear fault distribution matrix, the observability of the faults/unknown inputs w.r.t. the outputs is safeguarded and sliding modes are utilized for their reconstruction. The reconstruction of the faults from the sliding mode only relies on the output estimation error and thus can be implemented online together with the state estimation. Finally, an application to flexible joint robotic arm is used to illustrate the proposed method.     

Backstepping-based adaptive dynamic programming for missile-target guidance systems with state and input constraints

In this paper, a novel backstepping-based adaptive dynamic programming (ADP) method is developed to solve the problem of intercepting a maneuver target in the presence of full-state and input constraints. To address state constraints, a barrier Lyapunov function is introduced to every backstepping procedure. An auxiliary design system is employed to compensate the input constraints. Then, an adaptive backstepping feedforward control strategy is designed, by which the tracking problem for strict-feedback systems can be reduced to an equivalence optimal regulation problem for affine nonlinear systems. Secondly, an adaptive optimal controller is developed by using ADP technique, in which a critic network is constructed to approximate the solution of the associated Hamilton–Jacobi–Bellman (HJB) equation. Therefore, the whole control scheme consists of an adaptive feedforward controller and an optimal feedback controller. By utilizing Lyapunov's direct method, all signals in the closed-loop system are guaranteed to be uniformly ultimately bounded (UUB). Finally, the effectiveness of the proposed strategy is demonstrated by using a simple nonlinear system and a nonlinear two-dimensional missile-target interception system.