Learning in Stereo: The Relationship Between Spatial Ability and 3D Digital Anatomy Models

Three-dimensional (3D) digital anatomical models show potential to demonstrate complex anatomical relationships; however, the literature is inconsistent as to whether they are effective in improving the anatomy performance, particularly for students with low spatial visualization ability (Vz). This study investigated the educational effectiveness of a 3D stereoscopic model of the pelvis, and the relationship between learning with 3D models and Vz. It was hypothesized that participants learning with a 3D pelvis model would outperform participants learning with a two-dimensional (2D) visualization or cadaveric specimen on a spatial anatomy test, particularly when comparing those with low Vz. Participants (n = 64) were stratified into three experimental groups, who each attended a learning session with either a 3D stereoscopic model (n = 21), 2D visualization (n = 21), or cadaveric specimen (n = 22) of the pelvis. Medical and pre-medical student participants completed a multiple-choice pre-test and post-test during their respective learning session, and a long-term retention (LTR) test 2 months later. Results showed no difference in anatomy test improvement or LTR performance between the experimental groups. A simple linear regression analysis showed that within the 3D group, participants with high Vz tended to retain more than those with low Vz on the LTR test (R² = 0.31, P = 0.01). The low Vz participants may be cognitively overloaded by the complex spatial cues from the 3D stereoscopic model. Results of this study should inform resource selection and curriculum design for health professional students, with attention to the impact of Vz on learning.     

Development and implementation of a three-dimensional (3D) printing elective course for health science students

Three-dimensional (3D) printing technology has become more affordable, accessible, and relevant in healthcare, however, the knowledge of transforming medical images to physical prints still requires some level of training. Anatomy educators can play a pivotal role in introducing learners to 3D printing due to the spatial context inherent to learning anatomy. To bridge this knowledge gap and decrease the intimidation associated with learning 3D printing technology, an elective was developed through a collaboration between the Department of Anatomy and the Makers Lab at the University of California, San Francisco. A self-directed digital resource was created for the elective to guide learners through the 3D printing workflow, which begins with a patient's computed tomography digital imaging and communication in medicine (DICOM) file to a physical 3D printed model. In addition to practicing the 3D printing workflow during the elective, a series of guest speakers presented on 3D printing applications they utilize in their clinical practice and/or research laboratories. Student evaluations indicated that their intimidation associated with 3D printing decreased, the clinical and research topics were directly applicable to their intended careers, and they enjoyed the autonomy associated with the elective format. The elective and the associated digital resource provided students with the foundational knowledge of 3D printing, including the ability to extract, edit, manipulate, and 3D print from DICOM files, making 3D printing more accessible. The aim of disseminating this work is to help other anatomy educators adopt this curriculum at their institution.     

The mediastinal waltz - a representation of asymmetrical mediastinal anatomy

This article describes a representation formed by a waltzing couple of two students that can be used to teach the asymmetrical anatomical relationships among the trachea, bronchi, pulmonary trunk, and the pulmonary arteries in the mediastinum.     

The Impact of Three-Dimensional Printed Anatomical Models on First-Year Student Engagement in a Block Mode Delivery

Student engagement is known to have several positive effects on learning outcomes and can impact a student's university experience. High levels of engagement in content-heavy subjects can be difficult to attain. Due to a major institutional restructure, the anatomy prosection laboratory time per subject was dramatically reduced. In response, the authors set out to redesign their anatomy units with a focus on engaging the learning activities that would increase time-on-task both within and outside of the classroom. One of these curriculum changes was the implementation of a suite of anatomy learning activities centered on sets of three-dimensional printed upper limb skeleton models. A two-part mixed-method sequential exploratory design was used to evaluate these activities. Part one was a questionnaire that evaluated the students' engagement with and perceptions of the models. Part two involved focus groups interviews, which were an extension of the survey questions in part one. The results of the study indicated that the majority of students found the models to be an engaging resource that helped improve their study habits. As a result, students strongly felt that the use of the models inspired greater academic confidence and overall better performance in their assessments. Overall, the models were an effective way of increasing the engagement and deep learning, and reinforced previous findings from the medical education research. Future research should investigate the effects of these models on student's grades within osteopathy and other allied health courses.     

The Effect of Passive and Active Education Methods Applied in Repetition Activities on the Retention of Anatomical Knowledge

This study examines the long-term retention of anatomical knowledge from 180 students after various repetition activities. The retention of anatomical knowledge was assessed by multiple-choice tests at five different points in time: before and after a course in Functional Anatomy, before and after repetition activities that occurred 14 weeks after this course, and 28 weeks after this course to establish long-term retention. Students were divided into five groups: one without any repetition activity, one with a restricted repetition activity (the multiple-choice test), and three groups that were offered repetition activities (traditional lecture, e-learning module, and small group work in the dissection room). During all three repetition activities the same information was conveyed, and this content was not revisited in other courses for the duration of the study. The results showed that students who did not engage in a repetition activity scored significantly lower on the long-term retention test compared to all other groups (ANCOVA: P = 0.0001). Pair-wise comparison with estimated means showed that the other four groups, regardless of the type of repeating activity, did not differ in the amount of knowledge they retained during any of the five assessments (P = 0.008, P = 0.0001, P = 0.001, and P = 0.0001, respectively). This study suggests that the type of repetition activity has no effect on knowledge retention both immediately following the activity and in the long term. It is concluded that the repetition of anatomical knowledge in any form is beneficial for students and will likely improve student outcomes in a curriculum that builds on prior knowledge.     

Dual‐extrusion 3D printing of anatomical models for education

Two material 3D printing is becoming increasingly popular, inexpensive and accessible. In this paper, freely available printable files and dual extrusion fused deposition modelling were combined to create a number of functional anatomical models. To represent muscle and bone FilaFlex^3D flexible filament and polylactic acid (PLA) filament were extruded respectively via a single 0.4 mm nozzle using a Big Builder printer. For each filament, cubes (5 mm³) were printed and analyzed for X, Y, and Z accuracy. The PLA printed cubes resulted in errors averaging just 1.2% across all directions but for FilaFlex^3D printed cubes the errors were statistically significantly greater (average of 3.2%). As an exemplar, a focus was placed on the muscles, bones and cartilage of upper airway and neck. The resulting single prints combined flexible and hard structures. A single print model of the vocal cords was constructed which permitted movement of the arytenoids on the cricoid cartilage and served to illustrate the action of intrinsic laryngeal muscles. As University libraries become increasingly engaged in offering inexpensive 3D printing services it may soon become common place for both student and educator to access websites, download free models or 3D body parts and only pay the costs of print consumables. Novel models can be manufactured as dissectible, functional multi‐layered units and offer rich possibilities for sectional and/or reduced anatomy. This approach can liberate the anatomist from constraints of inflexible hard models or plastinated specimens and engage in the design of class specific models of the future. Anat Sci Educ 11: 65–72. © 2017 American Association of Anatomists.     

Evaluation of the effectiveness of 3D vascular stereoscopic models in anatomy instruction for first year medical students

The head and neck region is one of the most complex areas featured in the medical gross anatomy curriculum. The effectiveness of using three‐dimensional (3D) models to teach anatomy is a topic of much discussion in medical education research. However, the use of 3D stereoscopic models of the head and neck circulation in anatomy education has not been previously studied in detail. This study investigated whether 3D stereoscopic models created from computed tomographic angiography (CTA) data were efficacious teaching tools for the head and neck vascular anatomy. The test subjects were first year medical students at the University of Mississippi Medical Center. The assessment tools included: anatomy knowledge tests (prelearning session knowledge test and postlearning session knowledge test), mental rotation tests (spatial ability; presession MRT and postsession MRT), and a satisfaction survey. Results were analyzed using a Wilcoxon rank‐sum test and linear regression analysis. A total of 39 first year medical students participated in the study. The results indicated that all students who were exposed to the stereoscopic 3D vascular models in 3D learning sessions increased their ability to correctly identify the head and neck vascular anatomy. Most importantly, for students with low‐spatial ability, 3D learning sessions improved postsession knowledge scores to a level comparable to that demonstrated by students with high‐spatial ability indicating that the use of 3D stereoscopic models may be particularly valuable to these students with low‐spatial ability. Anat Sci Educ 10: 34–45. © 2016 American Association of Anatomists.     

Three-dimensional Visualization Software Assists Learning in Students with Diverse Spatial Intelligence in Medical Education

This study evaluated effect of mental rotation (MR) training on learning outcomes and explored effectiveness of teaching via three-dimensional (3D) software among medical students with diverse spatial intelligence. Data from n = 67 student volunteers were included. A preliminary test was conducted to obtain baseline level of MR competency and was utilized to assign participants to two experimental conditions, i.e., trained group (n = 25) and untrained group (n = 42). Data on the effectiveness of training were collected to measure participants’ speed and accuracy in performing various MR activities. Six weeks later, a large class format (LCF) session was conducted for all students using 3D software. The usefulness of technology-assisted learning at the LCF was evaluated via a pre- and post-test. Students’ feedback regarding MR training and use of 3D software was acquired through questionnaires. MR scores of the trainees improved from 25.9±4.6 points to 28.1±4.4 (P = 0.011) while time taken to complete the tasks reduced from 20.9±3.9 to 12.2±4.4 minutes. Males scored higher than females in all components (P = 0.016). Further, higher pre- and post-test scores were observed in trained (9.0±1.9 and 12.3±1.6) versus untrained group (7.8±1.8; 10.8±1.8). Although mixed-design analysis of variance suggested significant difference in their test scores (P < 0.001), both groups reported similar trend in improvement by means of 3D software (P = 0.54). Ninety-seven percent of students reported technology-assisted learning as an effective means of instruction and found use of 3D software superior to plastic models. Software based on 3D technologies could be adopted as an effective teaching pedagogy to support learning across students with diverse levels of mental rotation abilities.     

The production of anatomical teaching resources using three‐dimensional (3D) printing technology

The teaching of anatomy has consistently been the subject of societal controversy, especially in the context of employing cadaveric materials in professional medical and allied health professional training. The reduction in dissection‐based teaching in medical and allied health professional training programs has been in part due to the financial considerations involved in maintaining bequest programs, accessing human cadavers and concerns with health and safety considerations for students and staff exposed to formalin‐containing embalming fluids. This report details how additive manufacturing or three‐dimensional (3D) printing allows the creation of reproductions of prosected human cadaver and other anatomical specimens that obviates many of the above issues. These 3D prints are high resolution, accurate color reproductions of prosections based on data acquired by surface scanning or CT imaging. The application of 3D printing to produce models of negative spaces, contrast CT radiographic data using segmentation software is illustrated. The accuracy of printed specimens is compared with original specimens. This alternative approach to producing anatomically accurate reproductions offers many advantages over plastination as it allows rapid production of multiple copies of any dissected specimen, at any size scale and should be suitable for any teaching facility in any country, thereby avoiding some of the cultural and ethical issues associated with cadaver specimens either in an embalmed or plastinated form. Anat Sci Educ 7: 479–486. © 2014 American Association of Anatomists.     

Take away body parts! An investigation into the use of 3D‐printed anatomical models in undergraduate anatomy education

Understanding the three‐dimensional (3D) nature of the human form is imperative for effective medical practice and the emergence of 3D printing creates numerous opportunities to enhance aspects of medical and healthcare training. A recently deceased, un‐embalmed donor was scanned through high‐resolution computed tomography. The scan data underwent segmentation and post‐processing and a range of 3D‐printed anatomical models were produced. A four‐stage mixed‐methods study was conducted to evaluate the educational value of the models in a medical program. (1) A quantitative pre/post‐test to assess change in learner knowledge following 3D‐printed model usage in a small group tutorial; (2) student focus group (3) a qualitative student questionnaire regarding personal student model usage (4) teaching faculty evaluation. The use of 3D‐printed models in small‐group anatomy teaching session resulted in a significant increase in knowledge (P = 0.0001) when compared to didactic 2D‐image based teaching methods. Student focus groups yielded six key themes regarding the use of 3D‐printed anatomical models: model properties, teaching integration, resource integration, assessment, clinical imaging, and pathology and anatomical variation. Questionnaires detailed how students used the models in the home environment and integrated them with anatomical learning resources such as textbooks and anatomy lectures. In conclusion, 3D‐printed anatomical models can be successfully produced from the CT data set of a recently deceased donor. These models can be used in anatomy education as a teaching tool in their own right, as well as a method for augmenting the curriculum and complementing established learning modalities, such as dissection‐based teaching. Anat Sci Educ 11: 44–53. © 2017 American Association of Anatomists.     

Interactive Lecture in the Dissection Hall: Transforming Passive Lecture into a Dynamic Learning Experience

Traditionally, cadaver dissection and didactic lectures have formed the mainstay of teaching gross anatomy, but, apathy of the learners toward didactic lectures and reduction in the time allotted for teaching anatomy have necessitated adoption of interactive teaching methods that require lesser student contact time. In this study, for two consecutive years, first-year medical students were taught selected gross anatomy topics using Interactive Lecture in the Dissection Hall (ILDH). Instead of discarding the traditional methods, ILDH combined the two into a single, cohesive, interactive session, to teach the topic through multiple, short, segments of lecture alternating with interactive demonstration on the specimen. This method emerged by combining the insight gained from the newer teaching methods and reasoning from the cognitive load theory and contiguity principle. Students’ performance after ILDH was assessed by a test and was compared with the performance after conventional method of teaching. Students’ perception toward ILDH was assessed by a questionnaire. Students perceived that ILDH not only helped them in understanding the concepts better (97.7%), but, was also a better learning experience (99.2%). Majority felt that ILDH should be made an integral part of teaching anatomy (97.7%). Students’ performance in the test after the unified approach of ILDH was significantly better than with the split-source format of conventional methods. Students’ satisfaction, improved scores, and time efficiency indicate that ILDH may be an optimum method for teaching selected topics in anatomy.     

Improving Academic Performance of Sport and Exercise Science Undergraduate Students in Gross Anatomy Using a Near-Peer Teaching Program

Peer and near-peer teaching programs are common in medical undergraduate courses. However, there are no studies that have investigated the effectiveness of a near-peer teaching program on the academic performance of undergraduate students pursuing sport and exercise science coursework. This study was conducted to analyze the effectiveness of such a program for students who participated in a course on the functional anatomy of the locomotor apparatus. A total of 39 student participants were divided into two groups: students in one group voluntarily attended at least one session of a near-peer teaching program, and students in the other group attended no sessions. The final grade (range 0–100%) was recorded and used as an indicator of academic performance. The final grade of students who attended the near-peer teaching program (69.5 ± 16.0%) was 38.7% higher (P = 0.002, d = 1.06) than those who did not (50.1 ± 20.4%). When the academic performance of the same students was evaluated in another course (exercise physiology) that did not offer a near-peer teaching program, there were no significant differences between the groups (students who attended or did not attend the near-peer teaching program). A significant positive association was found between near-peer teaching program frequency and the number of students approved and not approved in the course (P = 0.041). A significant difference (P = 0.001) was found in the attendance at regular classes between the group who participated in the near-peer teaching program (median: 62 hours; IQR [interquartile ranges]: 4.0 hours) and those who did not (median: 58 hours; IQR: 4.0 hours). Gender was not a moderating factor on academic performance or near-peer teaching program attendance. These results highlight the effectiveness of a near-peer teaching program on the academic performance of students from a sport and exercise science degree program while enrolled in an anatomy course. Anat Sci Educ. © 2018 American Association of Anatomists.     

Cinematic Rendering in Anatomy: A Crossover Study Comparing a Novel 3D Reconstruction Technique to Conventional Computed Tomography

Integration of medical imaging into preclinical anatomy courses is already underway in many medical schools. However, interpretation of two-dimensional grayscale images is difficult and conventional volume rendering techniques provide only images of limited quality. In this regard, a more photorealistic visualization provided by Cinematic Rendering (CR) may be more suitable for anatomical education. A randomized, two-period crossover study was conducted from July to December 2018, at the University Hospital of Erlangen, Germany to compare CR and conventional computed tomography (CT) imaging for speed and comprehension of anatomy. Sixteen students were randomized into two assessment sequences. During each assessment period, participants had to answer 15 anatomy-related questions that were divided into three categories: parenchymal, musculoskeletal, and vascular anatomy. After a washout period of 14 days, assessments were crossed over to the respective second reconstruction technique. The mean interperiod differences for the time to answer differed significantly between the CR–CT sequence (−204.21 ± 156.0 seconds) and the CT–CR sequence (243.33 ± 113.83 seconds; P < 0.001). Overall time reduction by CR was 65.56%. Cinematic Rendering visualization of musculoskeletal and vascular anatomy was higher rated compared to CT visualization (P < 0.001 and P = 0.003), whereas CT visualization of parenchymal anatomy received a higher scoring than CR visualization (P < 0.001). No carryover effects were observed. A questionnaire revealed that students consider CR to be beneficial for medical education. These results suggest that CR has a potential to enhance knowledge acquisition and transfer from medical imaging data in medical education.     

The cranial nerve skywalk: A 3D tutorial of cranial nerves in a virtual platform

Visualization of the complex courses of the cranial nerves by students in the health‐related professions is challenging through either diagrams in books or plastic models in the gross laboratory. Furthermore, dissection of the cranial nerves in the gross laboratory is an extremely meticulous task. Teaching and learning the cranial nerve pathways is difficult using two‐dimensional (2D) illustrations alone. Three‐dimensional (3D) models aid the teacher in describing intricate and complex anatomical structures and help students visualize them. The study of the cranial nerves can be supplemented with 3D, which permits the students to fully visualize their distribution within the craniofacial complex. This article describes the construction and usage of a virtual anatomy platform in Second Life?, which contains 3D models of the cranial nerves III, V, VII, and IX. The Cranial Nerve Skywalk features select cranial nerves and the associated autonomic pathways in an immersive online environment. This teaching supplement was introduced to groups of pre‐healthcare professional students in gross anatomy courses at both institutions and student feedback is included. Anat Sci Educ 7: 469–478. © 2014 American Association of Anatomists.     

The Efficacy of Frontline Near-Peer Teaching in a Modern Medical Curriculum

Within medical education a reduction in curriculum time for subjects, such as anatomy puts pressure on educators to ensure the same learning outcomes are conveyed in less time. This has the potential to impact negatively on student experience. Near-peer teaching (NPT) is often praised as an effective revision tool, but its use as a frontline teaching resource remains unreported. The study explores the potential for NPT to promote delivery of learning outcomes and maximize student experience within a neuroanatomy module for second year medical students. The study occurred in three educational settings, (1) frontline NPT of cranial nerves, (2) revision session NPT of cranial nerves, and (3) NPT alongside faculty staff in laboratory-based neuroanatomy practical exercises. For the first and second components, knowledge was measured using a pre- and post-session test and student perception was ascertained with a questionnaire. For the third component, student perception was assessed with an end-of-module survey. The results show that overall, NPT was well received by learners. A significant knowledge gain was seen between the pre- and post-session test of the frontline NPT session. The study presents evidence in favor of using NPTs to supplement the delivery of learning outcomes in a time and resource constrained curriculum. In particular, for the effective delivery of frontline material. Anat Sci Educ 0: 1–9. © 2018 American Association of Anatomists.     

The Use of a Mobile Learning Tool by Medical Students in Undergraduate Anatomy and its Effects on Assessment Outcomes

Hand-held devices have revolutionized communication and education in the last decade. Consequently, mobile learning (m-learning) has become popular among medical students. Nevertheless, there are relatively few studies assessing students' learning outcomes using m-learning devices. This observational study presents an anatomy m-learning tool (eMed-App), an application developed to accompany an anatomy seminar and support medical students' self-directed learning of the skeletal system. Questionnaire data describe where, how frequently, and why students used the app. Multiple choice examination results were analyzed to evaluate whether usage of the app had an effect on test scores. The eMed-App application was used by 77.5% of the students, mainly accessed by Android smartphones, and at students' homes (62.2%) in order to prepare themselves for seminar sessions (60.8%), or to review learning content (67%). Most commonly, students logged on for less than 15 minutes each time (67.8%). Frequent app users showed better test results on items covering eMed-App learning content. In addition, users also achieved better results on items that were not related to the content of the app and, thus, gained better overall test results and lower failure rates. The top quartile of test performers used the eMed-App more frequently compared to students in lower quartiles. This study demonstrated that many students, especially the high-performing ones, made use of the eMed-App. However, the app itself did not result in better outcomes, suggesting that top students might have been more motivated to use the app than students who were generally weak in anatomy.     

National Survey on Canadian Undergraduate Medical Programs: The Decline of the Anatomical Sciences in Canadian Medical Education

The anatomical sciences have always been regarded as an essential component of medical education. In Canada, the methodology and time dedicated to anatomy teaching are currently unknown. Two surveys were administered to course directors and discipline leaders to gain a comprehensive view of anatomical education in Canadian medical schools. Participants were queried about contact hours (classroom and laboratory), content delivery and assessment methods for gross anatomy, histology, and embryology. Twelve schools responded to both surveys, for an overall response rate of 64%. Overall, Canadian medical students spend 92.8 (± 45.4) hours (mean ± SD) studying gross anatomy, 25.2 (± 21.0) hours for histology, and 7.4 (± 4.3) hours for embryology. Gross anatomy contact hours statistically significantly exceeded those for histology and embryology. Results show that most content is delivered in the first year of medical school, as anatomy is a foundational building block for upper-year courses. Laboratory contact time for gross anatomy was 56.8 (± 30.7) hours, histology was 11.4 (± 16.2) hours, and embryology was 0.25 (± 0.6) hours. Additionally, 42% of programs predominantly used instructor/technician-made prosections, another 33% used a mix of dissection and prosections and 25% have their students complete cadaveric dissections. Teaching is either completely or partially integrated into all Canadian medical curricula. This integration trend in Canada parallels those of other medical schools around the world where programs have begun to decrease contact time in anatomy and increase integration of the anatomical sciences into other courses. Compared to published American data, Canadian schools offer less contact time. The reason for this gap is unknown. Further investigation is required to determine if the amount of anatomical science education within medical school affects students' performance in clerkship, residency and beyond.     

Three-dimensional Printing in Anatomy Education: Assessing Potential Ethical Dimensions

New technological developments have frequently had major consequences for anatomy education, and have raised ethical queries for anatomy educators. The advent of three-dimensional (3D) printing of human material is showing considerable promise as an educational tool that fits alongside cadaveric dissection, plastination, computer simulation, and anatomical models and images. At first glance its ethical implications appear minimal, and yet the more extensive ethical implications around clinical bioprinting suggest that a cautious approach to 3D printing in the dissecting room is in order. Following an overview of early groundbreaking studies into 3D printing of prosections, organs, and archived fetal material, it has become clear that their origin, using donated bodies or 3D files available on the Internet, has ethical overtones. The dynamic presented by digital technology raises questions about the nature of the consent provided by the body donor, reasons for 3D printing, the extent to which it will be commercialized, and its comparative advantages over other available teaching resources. In exploring questions like these, the place of 3D printing within a hierarchical sequence of value is outlined. Discussion centers on the significance of local usage of prints, the challenges created by regarding 3D prints as disposable property, the importance of retaining the human side to anatomy, and the unacceptability of obtaining 3D-printed material from unclaimed bodies. It is concluded that the scientific tenor of 3D processes represents a move away from the human person, so that efforts are required to prevent them accentuating depersonalization and commodification.     

Evaluation by medical students of the educational value of multi‐material and multi‐colored three‐dimensional printed models of the upper limb for anatomical education

For centuries, cadaveric material has been the cornerstone of anatomical education. For reasons of changes in curriculum emphasis, cost, availability, expertise, and ethical concerns, several medical schools have replaced wet cadaveric specimens with plastinated prosections, plastic models, imaging, and digital models. Discussions about the qualities and limitations of these alternative teaching resources are on‐going. We hypothesize that three‐dimensional printed (3DP) models can replace or indeed enhance existing resources for anatomical education. A novel multi‐colored and multi‐material 3DP model of the upper limb was developed based on a plastinated upper limb prosection, capturing muscles, nerves, arteries and bones with a spatial resolution of ～1 mm. This study aims to examine the educational value of the 3DP model from the learner's point of view. Students (n = 15) compared the developed 3DP models with the plastinated prosections, and provided their views on their learning experience using 3DP models using a survey and focus group discussion. Anatomical features in 3DP models were rated as accurate by all students. Several positive aspects of 3DP models were highlighted, such as the color coding by tissue type, flexibility and that less care was needed in the handling and examination of the specimen than plastinated specimens which facilitated the appreciation of relations between the anatomical structures. However, students reported that anatomical features in 3DP models are less realistic compared to the plastinated specimens. Multi‐colored, multi‐material 3DP models are a valuable resource for anatomical education and an excellent adjunct to wet cadaveric or plastinated prosections. Anat Sci Educ 11: 54–64. © 2017 American Association of Anatomists.     

The Role of Anatomy Computer-Assisted Learning on Spatial Abilities of Medical Students

Currently, medical education context poses different challenges to anatomy, contributing to the introduction of new pedagogical approaches, such as computer-assisted learning (CAL). This approach provides insight into students' learning profiles and skills that enhance anatomy knowledge acquisition. To understand the influence of anatomy CAL on spatial abilities, a study was conducted. A total of 671 medical students attending Musculoskeletal (MA) and Cardiovascular Anatomy (CA) courses, were allocated to one of three groups (MA Group, CA Group, MA + CA Group). Students' pre-training and post-training spatial abilities were assessed through Mental Rotations Test (MRT), with scores ranging between 0-24. After CAL training sessions, students' spatial abilities performance improved (9.72 ± 4.79 vs. 17.05 ± 4.57, P < 0.001). Although male students in both MA Group and CA Group show better baseline spatial abilities, no sex differences were found after CAL training. The improvement in spatial abilities score between sessions (Delta MRT) was correlated with Musculoskeletal Anatomy training sessions in MA Group (r = 0.333, P < 0.001) and MA + CA Group (r = 0.342, P < 0.001), and with Cardiovascular Anatomy training sessions in CA Group (r = 0.461, P = 0.001) and MA + CA Group (r = 0.324, P = 0.001). Multiple linear regression models were used, considering the Delta MRT as dependent variable. An association of Delta MRT to the amount of CAL training and the baseline spatial abilities was observed. The results suggest that CAL training in anatomy has positive dose-dependent effect on spatial abilities.