Association between knee-to-hip flexion ratio during single-leg vertical landings,and strength and range of motion in professional soccer players

Abstract

The aim of this study was to test the correlation between knee-to-hip flexion ratio during a single leg landing task and hip and knee strength, and ankle range of motion. Twenty-four male participants from a professional soccer team performed a continuous single leg jump-landing test during 10s, while lower limb kinematics data were collected using a motion analysis system. After biomechanical testing, maximal isometric hip (abduction, extension, external rotation), knee extension and flexion strength were measured. Maximum ankle dorsiflexion range of motion was assessed statically using the weight bearing lunge test. Pearson correlation coefficients were calculated to determine the associations between the predictor variables (knee and hip strength, and ankle ROM) and the main outcome measure (knee-to-hip flexion ratio). Correlation between knee-to-hip flexion ratio and hip abductors strength was significant (r = ?0.47; p = 0.019). No other significant correlations were observed among the variables (p > 0.05). These results demonstrated that a lower hip abductors strength in male soccer players was correlated with a high knee-to-hip flexion ratio during landing from a single leg jump, potentially increasing knee overload by decreasing energy absorption at the hip. The results provide a novel proposal for the functioning of hip muscles to control knee overload.     

The effects of load on system and lower-body joint kinetics during jump squats

To investigate the effects of different loads on system and lower-body kinetics during jump squats, 12 resistance-trained men performed jumps under different loading conditions: 0%, 12%, 27%, 42%, 56%, 71%, and 85% of 1-repetition maximum (1-RM). System power output was calculated as the product of the vertical component of the ground reaction force and the vertical velocity of the bar during its ascent. Joint power output was calculated during bar ascent for the hip, knee, and ankle joints, and was also summed across the joints. System power output and joint power at knee and ankle joints were maximized at 0% 1-RM (p < 0.001) and followed the linear trends (p < 0.001) caused by power output decreasing as the load increased. Power output at the hip was maximized at 42% 1-RM (p = 0.016) and followed a quadratic trend (p = 0.030). Summed joint power could be predicted from system power (p < 0.05), while system power could predict power at the knee and ankle joints under some of the loading conditions. Power at the hip could not be predicted from system power. System power during loaded jumps reflects the power at the knee and ankle, while power at the hip does not correspond to system power.     

Lower extremity power during the squat jump with various barbell loads

The purpose of this study was twofold: (1) to determine the barbell load that maximised the system power as well as the ankle, knee, and hip joint powers during the squat jump, and (2) to compare the system powers computed from two different methods: the centre of mass (COM) method and the barbell method. Seven male throwers were recruited in this study. The system power (COM method) and the ankle, knee, and hip joint powers were determined with the load incrementally set at 0%, 10%, 30%, 50%, 70%, and 90% of one repetition maximum. The largest system power was observed at the load of 30% (p < 0.008) while the largest ankle and knee powers were observed at 70% and 0% (p < 0.05). The barbell method overestimated the system power (p < 0.001) when compared to the COM method. It was concluded that the barbell method could influence load optimisation in squat jump. The optimal barbell load which maximised the system power did not maximise the ankle, knee, or hip power simultaneously.     

Effect of attending to a ball during a side-cut maneuver on lower extremity biomechanics in male and female athletes

Many sports associated with anterior cruciate ligament (ACL) injury require athletes attend to a ball during participation. We investigated effects of attending to a ball on lower extremity mechanics during a side-cut maneuver and if these effects are consistent for males and females. Sagittal and frontal plane hip and knee kinematics and joint moments were measured during side-cut maneuvers in 19 male and 19 female National Collegiate Athletic Association division III basketball players. Participants also experienced two side-cut conditions that required attention to a ball. Our results did not indicate that the effect of attention varies with gender. However, during side-cut conditions while attending to a ball, internal knee adductor moment was 20% greater (p = 0.03) and peak knee flexion angle was 4° larger (p < 0.01). Females demonstrated 5° less hip flexion (p = 0.046), 12° less knee flexion (p < 0.01), and 4° more knee abduction (p = 0.026) at initial contact during all side-cut conditions than males. Attention to a ball may affect lower extremity mechanics relevant to ACL injury. The validity of laboratory studies of lower extremity mechanics for sports that include attention to a ball may be increased if participants are required to attend to a ball during the task.     

Kinetics and kinematics analysis of incremental cycling to exhaustion

Technique changes in cyclists are not well described during exhaustive exercise. Therefore the aim of the present study was to analyze pedaling technique during an incremental cycling test to exhaustion. Eleven cyclists performed an incremental cycling test to exhaustion. Pedal force and joint kinematics were acquired during the last three stages of the test (75%, 90% and 100% of the maximal power output). Inverse dynamics was conducted to calculate the net joint moments at the hip, knee and ankle joints. Knee joint had an increased contribution to the total net joint moments with the increase of workload (5–8% increase, p < 0.01). Total average absolute joint moment and knee joint moment increased during the test (25% and 39%, for p < 0.01, respectively). Increases in plantar flexor moment (32%, p < 0.01), knee (54%, p < 0.01) and hip flexor moments (42%, p = 0.02) were found. Higher dorsiflexion (2%, for p = 0.03) and increased range of motion (19%, for p = 0.02) were observed for the ankle joint. The hip joint had an increased flexion angle (2%, for p < 0.01) and a reduced range of motion (3%, for p = 0.04) with the increase of workload. Differences in joint kinetics and kinematics indicate that pedaling technique was affected by the combined fatigue and workload effects.     

The collision forces and lower-extremity inter-joint coordination during running

The purpose of this study was to compare the lower extremity inter-joint coordination of different collision forces runners during running braking phase. A dynamical system approach was used to analyse the inter-joint coordination parameters. Data were collected with six infra-red cameras and two force plates. According to the impact peak of the vertical ground reaction force, twenty habitually rearfoot-strike runners were categorised into three groups: high collision forces runners (HF group, n = 8), medium collision forces runners (MF group, n = 5), and low collision forces runners (LF group, n = 7). There were no significant differences among the three groups in the ankle and knee joint angle upon landing and in the running velocity (p > 0.05). The HF group produced significantly smaller deviation phase (DP) of the hip flexion/extension-knee flexion/extension during the braking phase compared with the MF and LF groups (p < 0.05). The DP of the hip flexion/extension-knee flexion/extension during the braking phase correlated negatively with the collision force (p < 0.05). The disparities regarding the flexibility of lower extremity inter-joint coordination were found in high collision forces runners. The efforts of the inter-joint coordination and the risk of running injuries need to be clarified further.     

Biomechanical analysis of the snatch technique in junior elite female weightlifters

The strength and technical competence of junior female lifters play a decisive role not only for their current but also adulthood performance. The objective of this study was to investigate the three-dimensional kinematics of the snatch technique in junior female weightlifters. Ten elite junior female weightlifters participated in the study. Two cameras operating at 50 fields per second were used to record the lifts. The heaviest successful lifts were selected for the kinematic analysis. The kinematical data were obtained using a motion analysis system. The duration of the first pull was significantly longer than that of the other phases (P < 0.05). Maximum extension angle and velocity of the lower limb joints were significantly greater in the second pull (P < 0.05). The greatest extension angle was found in the knee joint during the first pull, while the greatest extension angle was observed in the hip joint during the second pull (P < 0.05). Maximum extension velocity of the knee and hip joints was significantly greater than that of the ankle in both phases (P < 0.05). In addition, the vertical velocity of the barbell and the absolute and relative power outputs was significantly higher in the second pull than in the first pull (P < 0.05). In the snatch lifting of junior female weightlifters, the angular kinematics of lower limb joints, the linear kinematics and trajectory of the barbell and other energy characteristics are similar to and consistent with the values reported in literature for adult female weightlifters.     

Frontal plane comparison between drop jump and vertical jump: implications for the assessment of ACL risk of injury

The potential to use the vertical jump (VJ) to assess both athletic performance and risk of anterior cruciate ligament (ACL) injury could have widespread clinical implications since VJ is broadly used in high school, university, and professional sport settings. Although drop jump (DJ) and VJ observationally exhibit similar lower extremity mechanics, the extent to which VJ can also be used as screening tool for ACL injury risk has not been assessed. This study evaluated whether individuals exhibit similar knee joint frontal plane kinematic and kinetic patterns when performing VJs compared with DJs. Twenty-eight female collegiate athletes performed DJs and VJs. Paired t-tests indicated that peak knee valgus angles did not differ significantly between tasks (p = 0.419); however, peak knee internal adductor moments were significantly larger during the DJ vs. VJ (p < 0.001). Pearson correlations between the DJ and VJ revealed strong correlations for knee valgus angles (r = 0.93, p < 0.001) and for internal knee adductor moments (r = 0.82, p < 0.001). Our results provide grounds for investigating whether frontal plane knee mechanics during VJ can predict ACL injuries and thus can be used as an effective tool for the assessment of risk of ACL injury in female athletes.     

Hip and upper extremity kinematics in youth baseball pitchers

The purpose of this study was to examine the relationship between dynamic hip rotational range of motion and upper extremity kinematics during baseball pitching. Thirty-one youth baseball pitchers (10.87 ± 0.92 years; 150.03 ± 5.48 cm; 44.83 ± 8.04 kg) participated. A strong correlation was found between stance hip rotation and scapular upward rotation at maximum shoulder external rotation (r = 0.531, P = 0.002) and at ball release (r = 0.536, P = 0.002). No statistically significant correlations were found between dynamic hip rotational range of motion and passive hip range of motion. Hip range of motion deficits can constrain pelvis rotation and limit energy generation in the lower extremities. Shoulder pathomechanics can then develop as greater responsibility is placed on the shoulder to generate the energy lost from the proximal segments, increasing risk of upper extremity injury. Additionally, it appears that passive seated measurements of hip range of motion may not accurately reflect the dynamic range of motion of the hips through the progression of the pitch cycle.     

Three-dimensional kinematic comparison of treadmill and overground running

The treadmill is an attractive device for the investigation of human locomotion, yet the extent to which lower limb kinematics differ from overground running remains a controversial topic. This study aimed to provide an extensive three-dimensional kinematic comparison of the lower extremities during overground and treadmill running. Twelve participants ran at 4.0 m/s ( ± 5%) in both treadmill and overground conditions. Angular kinematic parameters of the lower extremities during the stance phase were collected at 250 Hz using an eight-camera motion analysis system. Hip, knee, and ankle joint kinematics were quantified in the sagittal, coronal, and transverse planes, and contrasted using paired t-tests. Of the analysed parameters hip flexion at footstrike and ankle excursion to peak angle were found to be significantly reduced during treadmill running by 12° (p = 0.001) and 6.6° (p = 0.010), respectively. Treadmill running was found to be associated with significantly greater peak ankle eversion (by 6.3°, p = 0.006). It was concluded that the mechanics of treadmill running cannot be generalized to overground running.     

Net joint moments and muscle activation in barbell squats without and with restricted anterior leg rotation

Muscle utilisation in squat exercise depends on technique. The purpose of this study was to compare net joint moments (NJMs) and muscle activation during squats without and with restricted leg dorsiflexion. Experienced men (n = 5) and women (n = 4) performed full squats at 80% one repetition maximum. 3D motion analysis, force platform and (EMG) data were collected. Restricting anterior leg rotation reduced anterior leg (P = 0.001) and posterior thigh (P < 0.001) rotations, resulting in a smaller knee flexion range of motion (P < 0.001). At maximum squat depth, ankle plantar flexor (P < 0.001) and knee extensor (P < 0.001) NJM were higher in unrestricted squats. Hip extensor NJM (P = 0.14) was not different between squat types at maximum squat depth. Vastus lateralis (P > 0.05), vastus medialis (P > 0.05) and rectus femoris (P > 0.05) EMG were not different between squat types. Unrestricted squats have higher ankle plantar flexor and knee extensor NJM than previously reported from jumping and landing. However, ankle plantar flexor and knee extensor NJM are lower in restricted squats than previous studies of jumping and landing. The high NJM in unrestricted squat exercise performed through a full range of motion suggests this squat type would be more effective to stimulate adaptations in the lower extremity musculature than restricted squats.     

Maximalist shoes do not alter performance or joint mechanical output during the countermovement jump

ABSTRACT

This study examined potential differences between maximally cushioned (MAX) shoes and standard cushioned (STND) shoes during countermovement vertical jump (CMVJ) performance. Twenty-one males (23[2] y; 86.5[15.4] kg; 179.8[6.3] cm) completed eight jumps each in MAX and STND shoes while three-dimensional kinematic and kinetic data were collected. Paired-samples t-tests (α = 0.05) and Cohen’s d effect sizes (ES) were used to compare the following variables: vertical jump displacement, jump time, hip, knee and ankle joint angles at the start of the countermovement, the end of the unloading phase, the end of the eccentric phase, and at takeoff, peak joint power, and the joint contributions to total lower extremity work during the eccentric and concentric phases. The ankle was more dorsiflexed at the end of the countermovement in the MAX shoe (p = 0.002; ES = 0.55) but greater plantarflexion occurred in the STND shoes at takeoff (p = 0.028; ES = 0.56). No other differences were observed. The result of this study suggests that unique ankle joint angular positioning may be employed when wearing MAX versus STND shoes. Since the unique ankle joint positioning did not alter jump performance, potential MAX footwear users might not need to consider the potential for altered CMVJ performance when determining whether to adopt MAX footwear.     

Analysis of lower limb work-energy patterns in world-class race walkers

The aim of this study was to analyse lower limb work patterns in world-class race walkers. Seventeen male and female athletes race walked at competitive pace. Ground reaction forces (1000 Hz) and high-speed videos (100 Hz) were recorded and normalised joint moments, work and power, stride length, stride frequency and speed estimated. The hip flexors and extensors were the main generators of energy (24.5 J (±6.9) and 40.3 J (±8.3), respectively), with the ankle plantarflexors (16.3 J (±4.3)) contributing to the energy generated during late stance. The knee generated little energy but performed considerable negative work during swing (?49.1 J (±8.7)); the energy absorbed by the knee extensors was associated with smaller changes in velocity during stance (r = .783, P < .001), as was the energy generated by the hip flexors (r = ?.689, P = .002). The knee flexors did most negative work (?38.6 J (±5.8)) and the frequent injuries to the hamstrings are probably due to this considerable negative work. Coaches should note the important contributions of the hip and ankle muscles to energy generation and the need to develop knee flexor strength in reducing the risk of injury.     

Lower limb moments differ when towing a weighted sled with different attachment points

Sprinting while towing a sled improves sprinting parameters, however, only kinematic and temporal–spatial variables have been reported. The purpose of this study was to determine how lower extremity joint moment impulses alter when towing a sled compared to normal walking. Twelve participants walked normally, walked while towing a sled with a 50% body weight load attached at the waist, and with a 50% body weight load attached at the shoulders. Joint moment impulses were calculated for the hip, knee, and ankle. A mixed-model ANOVA with a between-subject factor of limb and repeated measures of condition was used to compare differences between limbs and towing conditions for each joint. Towing a sled increased joint moment impulses at the hip, knee, and non-dominant ankle. When compared with normal walking waist attachment increased hip extension moment impulse by 214.5% ( ? 3.31 vs. ? 10.41 Nms/kg), and shoulder attachment increased knee extension moment impulse by 166.9% (4.62 vs. 12.33 Nms/kg). The dominant limb produced greater knee extension moment impulse (p < 0.001), while the non-dominant limb produced greater hip extension (p < 0.001) and ankle plantarflexion moment impulse (p < 0.001) across all conditions. Results suggest that walking while towing may increase hip and knee extension strength.     

Knee joint coordination during single-leg landing in different directions

ABSTRACT

Knee joint coordination during jump landing in different directions is an important consideration for injury prevention. The aim of the current study was to investigate knee and hip kinematics on the non-dominant and dominant limbs during landing. A total of 19 female volleyball athletes performed single-leg jump-landing tests in four directions; forward (0°), diagonal (30° and 60°) and lateral (90°) directions. Kinematic and ground reaction force data were collected using a 10-camera Vicon system and an AMTI force plate. Knee and hip joint angles, and knee angular velocities were calculated using a lower extremity model in Visual3D. A two factor repeated measures ANOVA was performed to explore limb dominance and jump direction. Significant differences were seen between the jump directions for; angular velocity at initial contact (p < 0.001), angular velocity at peak vertical ground reaction force (p < 0.001), and knee flexion excursion (p = 0.016). Knee coordination was observed to be poorer in the early phase of velocity-angle plot during landing in lateral direction compared to forward and diagonal directions. The non-dominant limb seemed to have better coordination than the dominant limb during multi-direction jump landing. Therefore, dominant limbs appear to be at a higher injury risk than non-dominant limbs.     

Biomechanics of aggressive inline skating: Landing and balancing on a grind rail

Abstract

Currently, only epidemiological injury data have been reported for the new extreme sport of aggressive inline skating, or trick skating. No studies have examined the biomechanics of this sport, which involves repetitive jumping and landing from railings, ramps, and ledges, often over 1 m in height. We present results of a pilot study that examined the effect of skater experience and lower extremity biomechanics on energy absorption ability, and observed balance strategies used during two basic tricks. In these tricks, the skater jumps onto an elevated rail and maintains balance while standing in a single position (stall) or sliding along the rail (grind). Lower extremity joint kinematics, impact force characteristics, and general movement behaviours were examined during landing and balance phases. Ten male skaters performed ten stalls and ten frontside grinds on an instrumented grind rail, capable of measuring vertical force. Vertical impact force was found to decrease with increasing skater experience in stalls (r = ?0.84, P = 0.002) and grinds (r = ?0.84, P = 0.009). This might imply that less-experienced skaters are (subconsciously) more concerned about maintaining balance than refining technique to minimize impact force. Similar to drop landing experiments, peak impact force decreased with increasing knee flexion during stalls (r = ?0.65, P = 0.04). During stalls, skaters demonstrated classic balance maintenance strategies (ankle, hip, or multi-joint) depending on trick length. During grinds, skater centre of mass never passed over the rail base of support, suggesting the use of momentum produced from obliquely approaching the rail.     

The effects of weighted skates on ice-skating kinematics,kinetics and muscular activity

Sport-specific resistance training, through limb loading, can be a complimentary training method to traditional resistance training by loading the working muscles during all phases of a specific movement. The purpose of this study was to examine the acute effects of skating with an additional load on the skate, using a skate weight prototype, on kinematics, kinetics, and muscle activation during the acceleration phase while skating on a synthetic ice surface. 10 male hockey skaters accelerated from rest (standing erect with knees slightly bent) under four non-randomized load conditions: baseline 1 (no weight), light (0.9 kg per skate), heavy (1.8 kg per skate), and baseline 2 (no weight). Skating with additional weight caused athletes to skate slower (p < 0.001; η² = 0.551), and led to few changes in kinematics: hip sagittal range of motion (ROM) decreased (2.2°; p = 0.032; η² = 0.274), hip transverse ROM decreased (3.4°; p < 0.001; η² = 0.494), ankle sagittal ROM decreased (2.3°; p = 0.022; η² = 0.295), and knee sagittal ROM increased (7.8°; p < 0.001, η² = 0.761). Overall, weighted skates decreased skating velocity, but athletes maintained similar muscle activation profiles (magnitude and trends) with minor changes to their skating kinematics.     

Lower extremity joint coupling variability during gait in young adults with and without chronic ankle instability

Chronic ankle instability (CAI) is a condition resulting from a lateral ankle sprain. Shank-rearfoot joint-coupling variability differences have been found in CAI patients; however, joint-coupling variability (VCV) of the ankle and proximal joints has not been explored. Our purpose was to analyse VCV in adults with and without CAI during gait. Four joint-coupling pairs were analysed: knee sagittal-ankle sagittal, knee sagittal-ankle frontal, hip frontal-ankle sagittal and hip frontal-ankle frontal. Twenty-seven adults participated (CAI:n = 13, Control:n = 14). Lower extremity kinematics were collected during walking (4.83 km/h) and jogging (9.66 km/h). Vector-coding was used to assess the stride-to-stride variability of four coupling pairs. During walking, CAI patients exhibited higher VCV than healthy controls for knee sagittal-ankle frontal in latter parts of stance thru mid-swing. When jogging, CAI patients demonstrated lower VCV with specific differences occurring across various intervals of gait. The increased knee sagittal-ankle frontal VCV in CAI patients during walking may indicate an adaptation to deal with the previously identified decrease in variability in transverse plane shank and frontal plane rearfoot coupling during walking; while the decreased ankle-knee and ankle-hip VCV identified in CAI patients during jogging may represent a more rigid, less adaptable sensorimotor system ambulating at a faster speed.     

Age and gender differences in kinematics of powerful instep kicks in soccer

Soccer kicking training should be adjusted to the characteristics of the athletes. Therefore, examination of differences in kicking kinematics of females and pubertal players relative to males is worthwhile. The purpose of the study was to compare kicking kinematics and segmental sequence parameters between male, female, and pubertal players. Ten adult male, ten adult female, and ten male pubertal players participated in the study. Participants performed five consecutive kicking trials of a stationary ball, as powerful as they could. Analysis of variance showed significantly higher ball velocity, higher joint linear velocities for the knee and the hip, and higher angular velocities of the knee and the ankle for males compared to female and pubertal players (p < 0.05). Similarly, the peak joint velocity was achieved significantly closer to ball impact in males compared to other groups (p < 0.05). Males also showed a more plantarflexed ankle immediately before ball impact (p < 0.05). Females and pubertal players may benefit from skill training aiming to increase ankle plantarflexion and hip flexion prior to ball impact, and to adjust thigh and shank motion, such that the shank–foot segment travels through a higher range of motion and with a greater velocity.     

Comparison of three-dimensional lower extremity running kinematics of young adult and elderly runners

Abstract

The objective of this study was to compare the three-dimensional lower extremity running kinematics of young adult runners and elderly runners. Seventeen elderly adults (age 67–73 years) and 17 young adults (age 26–36 years) ran at 3.1 m · s^?1 on a treadmill while the movements of the lower extremity during the stance phase were recorded at 120 Hz using three-dimensional video. The three-dimensional kinematics of the lower limb segments and of the ankle and knee joints were determined, and selected variables were calculated to describe the movement. Our results suggest that elderly runners have a different movement pattern of the lower extremity from that of young adults during the stance phase of running. Compared with the young adults, the elderly runners had a substantial decrease in stride length (1.97 vs. 2.23 m; P = 0.01), an increase in stride frequency (1.58 vs. 1.37 Hz; P = 0.002), less knee flexion/extension range of motion (26 vs. 33°; P = 0.002), less tibial internal/external rotation range of motion (9 vs. 12°; P < 0.001), larger external rotation angle of the foot segment (toe-out angle) at the heel strike (?5.8 vs. ?1.0°; P = 0.009), and greater asynchronies between the ankle and knee movements during running. These results may help to explain why elderly individuals could be more susceptible to running-related injuries.