章动内啮合渐开线螺旋锥齿轮齿面接触分析

对章动传动中内啮合渐开线螺旋锥齿轮的齿面接触特性进行分析。根据章动内啮合螺旋锥齿轮啮合原理,在建立由渐开线曲线和齿根过渡曲线组成的法向基本齿廓方程基础上,推导内啮合渐开线螺旋锥齿轮齿面方程,并建立其三维模型。在有限元软件中建立渐开线螺旋锥齿轮齿面接触分析的有限元模型,从接触面积、接触压强、接触力及Mises 应力等方面对齿面接触特性进行分析,分析结果有助于章动内啮合螺旋锥齿轮的改进设计。     

Excitation prediction by dynamic transmission error under sliding friction in helical gear system

Monte Carlo method was adopted to calculate the meshing error considering the manufacture error and assembly error of the meshing point along the time-varying contact line for helical gear pair. The flexural-torsion-axis dynamic model coupled was established under the tooth friction force and solved by the perturbation method to compute real dynamic tooth load. The change laws of the friction force and friction torque were obtained in a meshing period. The transmission error formulation was analyzed to introduce meshing excitations. The maximum dynamic transmission error, the maximum meshing force and the maximum dynamic factor were calculated under different speeds, external loads and damping factors. The conclusions can provide theoretical basis for the gear design especially in tooth profile correction.     

薄壁四点接触球轴承配合接触特性有限元分析

在实际情况下,薄壁四点轴承与轴承座、轴的配合对薄壁轴承载荷分布、承载能力、轴承刚度有着很大影响。建立腕关节薄壁四点接触球轴承—基座—空心轴构成的轴承系统有限元模型以模拟轴承配合,从而选择最佳配合模型,对实际情况下的轴承配合具有指导意义。基于 ANSYS 有限元软件建立薄壁四点接触轴承不同配合的有限元模型,通过对不同配合模型接触特性进行有限元分析,得出薄壁四点接触球轴承较为精确的椭圆接触区域形状和四点接触状态。对于轴承配合模型 H7 在内外套圈与空心轴及基座接触时有明显应力集中现象,由于轴承滚珠并非在侧面对称,导致轴承与基座及空心轴在靠近滚珠的一边出现应力集中情况。对不同配合的有限元模型进行静态接触特性分析,发现各轴承配合整体等效应力最大值、外圈等效应力最大值、接触应力最大值、基座等效应力最大值区别不大,选择 K7/j7 的轴承配合模型才能使轴承内圈与空心轴的最大等效应力最小。计算结果较为精确地模拟了薄壁四点接触球轴承的接触特性和载荷分布规律,对于实际情况下轴承装配具有一定指导意义。     

Analysis modeling for plate buckling load of vibration test

In view of the recent technological development, the pursuit of safe high-precision structural designs has been the goal of most structural designers. To bridge the gap between the construction theories and the actual construction techniques, safety factors are adopted for designing the strength loading of structural members. If safety factors are too conservative, the extra building materials necessary will result in high construction cost. Thus, there has been a tendency in the construction field to derive a precise buckling load analysis model of member in order to establish accurate safety factors. A numerical analysis model, using modal analysis to acquire the dynamic function calculated by dynamic parameter to get the buckling load of member, is proposed in this paper. The fixed and simple supports around the circular plate are analyzed by this proposed method. And then, the Monte Carlo method and the normal distribution method are used for random sampling and measuring errors of numerical simulati     

Analysis of a load application point in spline coupling teeth

The objective of this paper is to investigate the position of the resultant force in involute spline coupling teeth due to the contact pressure distribution for both ideal and misaligned conditions. In general, spline coupling teeth are in contact all along the involute profile and the load is far from uniform along the contact line. Theoretical models available in publications consider the resultant contact force as it is applied at the pitch diameter, and this study aims to evaluate the error introduced within the confines of a common approximation environment. This analysis is carried out through using finite element method （FEM） models, considering spline couplings in both ideal and misaligned conditions. Results show that the differences between the load application diameter and pitch diameter are not very obvious in both ideal and misaligned conditions; however, this ap- proximation becomes more important for the calculation of the tooth stiffness.     

交错轴渐开线锥形齿轮的接触特性

Based on the theory of gearing and the gear generating mechanism, this study investigates the contact characteristics of conical involute gear pairs with crossed axes. The meshing model with a reference rack as intermedium is established and tooth contact analysis （TCA） is performed to examine the meshing and bearing contact of the conical involute gear pairs composed of a pinion and a gear. Using the contact line of reference rack tooth surface, the path of contact is confirmed, and the calculation formula of principal direction, relative curvature, path of contact and ellipse of contact are derived. Finally, numerical examples are provided to demonstrate computational results and test gears are made for tooth-bearing tests. The conclusion verifies that the theory is applicable.     

计及温控负荷的小干扰稳定性分析

温控负荷是电力系统最为重要的负荷类型之一,它对电力系统的小干扰稳定具有重要的影响。针对这类以恒温控制器控制的负荷（温控负荷）展开研究,通过对恒温控制器动态加热方程的分析,建立用于小干扰稳定分析的温控负荷的数学模型。以3机9节点系统为算例在MATLAB的电力系统分析工具箱（PSAT）中对温控负荷接入电力系统后对系统小干扰稳定影响进行仿真分析。最后以简单的单机无穷大系统为例,进一步分析其负荷参数变化对系统小干扰稳定的影响。仿真分析结果表明:相对于传统的静态负荷温控负荷不利于系统小干扰电压稳定;温控负荷比例控制增益,环境温度,参考温度,对系统的小干扰稳定影响较大;积分控制器增益,积分控制器时间常数,负荷时间常数对系统小干扰稳定性影响较小。     

Characteristics of bifurcation and buckling load of space truss in consideration of initial imperfection and load mode

This study investigated characteristics of bifurcation and critical buckling load by shape imperfection of space truss,which were sensitive to initial conditions.The critical point and buckling load were computed by the analysis of the eigenvalues and determinants of the tangential stiffness matrix.The two-free-nodes example and star dome were selected for the case study in order to examine the nodal buckling and global buckling by the sensitivity to the eigen buckling mode and the analyses of the influence,and characteristics of the parameters as defined by the load ratio of the center node and surrounding node,as well as rise-span ratio were performed.The sensitivity to the imperfection of the initial shape of the two-free-nodes example,which occurs due to snapping at the critical point,resulted in bifurcation before the limit point due to the buckling mode,and the buckling load was reduced by the increase in the amount of imperfection.The two sensitive buckling patterns of the numerical model are established by investigating the displaced position of the free nodes,and the asymmetric eigenmode greatly influenced the behavior of the imperfection shape whether it was at limit point or bifurcation.Furthermore,the sensitive mode of the two-free-nodes example was similar to the in-extensional basis mechanism of a simplified model.The star dome,which was used to examine the influence among several nodes,indicated that the influence of nodal buckling was greater than that of global buckling as the rise-span ratio was higher.Besides,global buckling is occurred with reaching bifurcation point as the value of load ratio was higher,and the buckling load level was about 50%-70% of load level at limit point.     

A method for the global optimization of the tooth contact pattern and transmission error of spiral bevel and hypoid gears

In this paper, we present a method for the global optimization of the tooth contact pattern and transmission error of spiral bevel and hypoid gears, which includes three optimization objectives, three control parameters, and a complex-constrain genetic algorithm solving method. A new set of fundamental equations for pitch cone parameters of hypoid gear drives are established, as well as the relationships between pitch cone and curvature parameters. Based on this theory, three control parameters are selected to determine the pinion tooth surface. A hypoid gear drive is chosen for case studies. The results verify that the optimization methodology can achieve the expected optimization objectives and has good convergence. Correlations between optimization objectives and control parameters are discussed. Furthermore, a finite element model of a simplified hypoid gear drive system is established and its quasi-static meshing characteristics analyzed. The results again confirm the correctness of the optimization method. The effects of torque load on the contact pattern and transmission error are discussed. The results provide a theoretical reference for geometric calculations, quasi-static analysis, and optimal design of spiral bevel and hypoid gears.     

移动荷载作用下柔性路面多尺度结构的响应

为了研究移动荷载下路面结构内部细观结构的响应,采用离散元方法进行了多尺度路面结构移动荷载响应的分析．建立了柔性基层沥青路面典型结构的离散元模型,并计算了移动荷载作用下沥青层底的应力和应变,通过与已有经典计算程序荷栽响应计算结果的比较,验证了所建立的离散元模型．以该离散元模型为基础,在沥青混凝土结构层的底部,采用尺度较小的离散单元描述粗集料的体积含量、分布特征以及空隙大小等细观结构,以此建立路面结构的多尺度模型．对路面结构宏观响应与细观结构的荷载响应进行了比较分析,并分析了沥青砂浆劲度对细观结构处荷载响应的影响．结果表明：粗集料与沥青砂浆界面位置的拉应力均值和离散系数均大于沥青砂浆内部;荷载引起的应力和应变在沥青砂浆内部和界面内部均存在不均匀分布;沥青砂浆的劲度越大,沥青混凝土内部的荷载响应分布越趋于均匀．     

计及可平移负荷的配电网光伏消纳策略

针对大规模分散式光伏接入所导致的配电网节点电压越限以及光伏弃光问题,建立了具有计及可平移负荷的主动配电网的日前调度模型。分析了光伏弃光现象与电压及功率潮流之间的关系,构建光伏能源消纳的数学模型,并且针对不同类型可平移负荷的运行特点,分析了可平移负荷的调度特性。综合考虑静止无功补偿器对配电网的无功调度及节点电压的影响,将分布式光伏的消纳最大化问题等效为了一个混合整数规划模型进行求解。仿真验证其模型的有效性。     

WN齿轮传动的三维建模与啮合仿真分析

本文采用Pro/E与ANSYS联合建模的方式,在PRO/E中根据WN齿轮的齿面方程建立WN齿轮模型,并进行了WN齿轮传动的三维动态啮合仿真分析。利用ANSYS的参数化设计语言APDL建立了WN齿轮的三维有限元接触分析模型,进行了WN齿轮啮合特征分析。     

负荷不确定性的配电网无功规划优化

提出一种考虑负荷不确定性的配电网无功规划优化的方法。该方法把不确定负荷表示成模糊数的形式并通过拟合误差服从正态分布来求取模糊集合参数;然后建立无功规划优化的模型。并采用模糊分析法,使模糊负荷能运用到求解模型中去;最后采用改进的二进制粒子群算法来求解无功优化模型。算例分析证明了此方法的有效性。     

双圆弧齿轮基本齿廓的图形参数化

双圆弧齿轮具有凹凸齿廓啮合的优点,综合承载能力高,在接触强度和弯曲强度方面,比渐开线齿轮传动有很大幅度的提高.利用AUTOLISP编程,实现了双圆弧齿轮基本齿廓的图形参数化,为建立双圆弧齿轮的实体模型,对双圆弧齿轮做进一步分析、研究打下基础.     

列车荷载对下穿盾构隧道影响的模型试验

为研究地面线路运营对下穿盾构隧道结构的影响规律,基于相似比理论建立室内大型试验模型,模拟上部列车荷载作用下土层及其内部盾构隧道结构的受力变形过程,总结变形规律。结果表明,模型试验能够较好地反映外部荷载影响下土层以及内部盾构隧道结构的受力和变形特性;地表列车荷载在土层传递过程中,同一层面上沿地面线路方向的土压力大于两侧土压力,远离线路的地层受列车荷载影响相对较小,同一竖向截面土压力变化量由上至下逐渐减小,即外部荷载对浅层土的影响明显大于深层土;盾构隧道在地表列车行驶过程中,环向出现背车面受拉迎车面受压的受力特性,呈斜向压扁,纵向应变从中间交叉点向盾构隧道两侧逐渐减小,呈下凹压弯;盾构隧道埋深越小,受地表荷载影响越显著,增大一倍埋深对应纵向应变最大值减小约44.5%。     

Modeling of D-STATCOM in distribution systems load flow

This paper presents modeling of Distribution STATCOM (D-STATCOM) in load flow calculations for the steady- state voltage compensation. An accurate model for D-STATCOM is derived to use in load flow calculations. The rating of this device as well as the direction of required reactive power injection for voltage compensation in the desired value (1 p.u.) is de- rived and discussed analytically and mathematically by the phasor diagram method. Furthermore, an efficient method for node and line identification used in load flow calculations is presented. The validity of the proposed model is examined by using two standard distribution systems consisting of 33 and 69 nodes, respectively. The best location of D-STATCOM for under voltage problem mitigation approach in the distribution networks is determined. The results validate the proposed model for D- STATCOM in large distribution systems.     

A method for predicting critical load evaluating adhesion of coatings in scratch testing

INTRODUCTIONHardceramicfilmsdepositedbychemicalva pordeposition (CVD)andphysicalvapordeposi tion (PVD)techniqueshadbeenwidelyappliedinindustry .Coatingadhesionisaveryimportantpropertyforevaluatingthecoatingquality.Themethodevaluatingtheadhesionstrengthoft…     

A method for predicting critical load evaluating adhesion of coatings in scratch testing

In this paper based on the experiment principle of evaluating adhesion property by scratch testing, the peeling mechanism of thin films is discussed by applying contact theory and surface physics theory. A mathematical model predicting the critical load is proposed for calculating critical load as determined by scratch testing. The factors for correctly evaluating adhesion of coatings according to the experimental data are discussed.     

斜齿轮副结构参数灵敏度分析

以机械传动系统中的斜齿轮啮合为研究对象,在考虑时变刚度、齿侧间隙和啮合误差的情况下,建立了十自由度斜齿轮非线性振动数学模型。以斜齿轮结构参数作为灵敏度分析参数,采用数值分析方法分别研究了斜齿轮系统振动加速度均方根值对齿轮质量、支撑刚度和支撑阻尼的灵敏度。结果表明:主、被动轮横向（y向）振动对各参数敏感度较低,横向振动（x向）与被动轮扭转振动对质量参数、刚度参数、阻尼参数较为敏感,被动轮扭转振动受到阻尼的影响很大,灵敏度在扭转振动固有频率处变化较大。     

调心球轴承动态特性参数分析

基于Jones-Harris方法建立了调心球轴承的动力学模型,应用Newton-Raphson方法对轴承动力学方程组进行了求解,开发了相应的计算程序.完成了该轴承的离心力、陀螺力矩、接触载荷、接触角、径向变形与径向刚度等动态特性参数分析.分析结果表明：转速与载荷是影响接触角大小与接触载荷分布最主要的2个因素;滚子的离心力与陀螺力矩随着转速的上升而增大,在此影响下外圈接触载荷增大而内圈接触载荷减小;受离心力的影响,外圈的接触角减小而内圈的接触角增大,且随着转速的增加,内外圈接触角的差值越来越大;轴承的径向刚度随着转速的上升而下降,而滚道沟曲率系数也对轴承径向刚度有一定程度的影响.