Characterization of a hyperthermophilic sulphur-oxidizing biofilm produced by archaea isolated from a hot spring

BackgroundSulphur-oxidizing microorganisms are widely used in the biofiltration of total reduced sulphur compounds (odorous and neurotoxic) produced by industries such as the cellulose and petrochemical industries, which include high-temperature process steps. Some hyperthermophilic microorganisms have the capability to oxidize these compounds at high temperatures (> 60°C), and archaea of this group, for example, Sulfolobus metallicus, are commonly used in biofiltration technology.ResultsIn this study, a hyperthermophilic sulphur-oxidizing strain of archaea was isolated from a hot spring (Chillán, Chile) and designated as M1. It was identified as archaea of the genus Sulfolobus (99% homology with S. solfataricus 16S rDNA). Biofilms of this culture grown on polyethylene rings showed an elemental sulphur oxidation rate of 95.15 ± 15.39 mg S l^-1 d^-1, higher than the rate exhibited by the biofilm of the sulphur-oxidizing archaea S. metallicus (56.8 ± 10.91 mg l^-1 d^-1).ConclusionsThe results suggest that the culture M1 is useful for the biofiltration of total reduced sulphur gases at high temperatures and for other biotechnological applications.     

Effect of initial pH of medium with potato wastewater and glycerol on protein,lipid and carotenoid biosynthesis by Rhodotorula glutinis

BackgroundRhodotorula glutinis is capable of synthesizing numerous valuable metabolites with extensive potential industrial usage. This paper reports the effect of initial culture medium pH on growth and protein, lipid, and carotenoid biosynthesis by R. glutinis.ResultsThe highest biomass yield was obtained in media with pH 4.0–7.0, and the value after 72 h was 17.2–19.4 g_d.w./L. An initial pH of the medium in the range of 4.0–7.0 has no significant effect on the protein (38.5–41.3 g/100 g_d.w.), lipid (10.2–12.7 g/100 g_d.w.), or carotenoid (191.7–202.9 μg/g_d.w.) content in the biomass or on the profile of synthesized fatty acids and carotenoids. The whole pool of fatty acids was dominated by oleic (48.1–53.4%), linoleic (21.4–25.1%), and palmitic acids (13.0–15.8%). In these conditions, the yeast mainly synthesized torulene (43.5–47.7%) and β-carotene (34.7–38.6%), whereas the contribution of torularhodin was only 12.1–16.8%. Cultivation in medium with initial pH 3.0 resulted in a reduction in growth (13.0 g_d.w./L) and total carotenoid (115.8 μg/g_d.w.), linoleic acid (11.5%), and torularhodin (4.5%) biosynthesis.ConclusionThe different values of initial pH of the culture medium with glycerol and deproteinized potato wastewater had a significant effect on the growth and protein, lipid, and carotenoid biosynthesis by R. glutinis.     

Enhanced alkaline catalase production by Serratia marcescens FZSF01: Enzyme purification,characterization, and recombinant expression

BackgroundCatalase (CAT) is an important enzyme that degrades H₂O₂ into H₂O and O₂. To obtain an efficient catalase, in this study, a new strain of high catalase-producing Serratia marcescens, named FZSF01, was screened and its catalase was purified and characterized.ResultsAfter optimization of fermentation conditions, the yield of catalase produced by this strain was as high as 51,468 U/ml. This catalase was further purified using two steps: DEAE-fast flow and Sephedex-G150. The purified catalase showed a specific activity of 197,575 U/mg with a molecular mass of 58 kDa. This catalase exhibited high activity at 20–70°C and pH 5.0–11.0. Km of the catalase was approximately 68 mM, and Vmax was 1886.8 mol/min mg. This catalase was further identified by LC–MS/MS, and the encoding gene was cloned and expressed in Escherichia coli BL21 (DE3) with a production of 17,267 ± 2037 U/ml.ConclusionsTo our knowledge, these results represent one of the highest fermentation levels reported among current catalase-producing strains. This FZSF01 catalase may be suitable for several industrial applications that comprise exposure to alkaline conditions and under a wide range of temperatures.     

Cloning,characterization and expression of Peking duck fatty acid synthase during adipocyte differentiation

BackgroundFatty acid synthase (FAS) is a key enzyme of de novo lipogenesis (DNL), which has been cloned from several species: Gallus gallus, Mus musculus, Homo sapiens, but not from Anas platyrhynchos. The current study was conducted to obtain the full-length coding sequence of Peking duck FAS and investigate its expression during adipocyte differentiation.ResultsWe have isolated a 7654 bp fragment from Peking duck adipocytes that corresponds to the FAS gene. The cloned fragment contains an open reading frame of 7545 bp, encodes a 2515 amino acid protein, and displays high nucleotide and amino acid homology to avian FAS orthologs. Twelve hour treatment of oleic acid significantly up-regulated the expression of FAS in duck preadipocytes (P < 0.05). However, 1000 μM treatment of oleic acid exhibited lipotoxic effect on cell viability (P < 0.05). In addition, during the first 24 h of duck adipocyte differentiation FAS was induced; however, after 24 h its expression level declined (P < 0.05).ConclusionWe have successfully cloned and characterized Peking duck FAS. FAS was induced during adipocyte differentiation and by oleic acid treatment. These findings suggest that Peking duck FAS plays a similar role to mammalian FAS during adipocyte differentiation.     

Evaluation of alkali and thermotolerant lipase from an indigenous isolated Bacillus strain for detergent formulation

BackgroundLipases are used in detergent industries to minimise the use of phosphate-based chemicals in detergent formulations. The use of lipase in household laundry reduces environmental pollution and enhances the ability of detergent to remove tough oil or grease stains.ResultsA lipase-producing indigenous Bacillus subtilis strain [accession no. KT985358] was isolated from the foothills of Trikuta mountain in Jammu and Kashmir, India. The lipase (BSK-L) produced by this strain expressed alkali and thermotolerance. Lipase has an optimal activity at pH 8.0 and temperature 37°C, whereas it is stable at pH 6.0–9.0 and showed active lipolytic activity at temperatures 30 to 60°C. Furthermore, lipase activity was found to be stimulated in the presence of the metal ions Mn^2 +, K⁺, Zn^2 +, Fe^2 + and Ca^2 +. This lipase was resistant to surfactants, oxidising agents and commercial detergents, suggesting it as a potential candidate for detergent formulation. BSK-L displayed noticeable capability to remove oil stains when used in different washing solutions containing buffer, lipase and commercial detergent. The maximum olive oil removal percentage obtained was 68% when the optimum detergent concentration (Fena) was 0.3%. The oil removal percentage from olive oil-soiled cotton fabric increased with 40 U/mL of lipase.ConclusionsThis BSK-L enzyme has the potential for removing oil stains by developing a pre-soaked solution for detergent formulation and was compatible with surfactants, oxidising agents and commercial detergents.     

In vitro propagation of Vitis vinifera L. cv. ‘Monastrell’

BackgroundA protocol for the micropropagation of the grape (Vitis vinifera L.) cultivar ‘Monastrell’ was developed. Initial plant material was obtained from the sanitary selection of grapevine plants performed by real-time RT-PCR to confirm the absence of Grapevine fanleaf virus, Arabis mosaic virus, Grapevine leafroll-associated virus 1, Grapevine leafroll-associated virus 3, and Grapevine fleck virus.ResultsThe effects of the salt composition (comparing Lloyd and McCown woody plant medium and Murashige and Skoog medium 1/2 macronutrients) and the growth regulator benzylaminopurine (BAP), at 0 and 8.9 μM, on plant propagation were evaluated using nodes as explants. The most efficient procedure consisted of bud induction in the medium with Lloyd and McCown woody plant salts and 8.9 μM BAP for 30 d along with elongation in cytokinin-free medium for 60 d, which gave 22 nodes/explant (174 plants/initial plant). A second cycle of propagation in a medium without BAP for another 60 d could give approximately 10,000 nodes, which can be obtained after an additional 2 months of culture. All plants acclimatized after the second cycle of multiplication were successfully transferred to soil.ConclusionWe developed an optimal protocol for V. vinifera cv. ‘Monastrell’ micropropagation, the first described for this cultivar.     

Improvement of ethanol production from sweet sorghum juice under batch and fed-batch fermentations: Effects of sugar levels,nitrogen supplementation,and feeding regimes

BackgroundFermentation process development has been very important for efficient ethanol production. Improvement of ethanol production efficiency from sweet sorghum juice (SSJ) under normal gravity (NG, 160 g/L of sugar), high gravity (HG, 200 and 240 g/L of sugar) and very high gravity (VHG, 280 and 320 g/L of sugar) conditions by nutrient supplementation and alternative feeding regimes (batch and fed-batch systems) was investigated using a highly ethanol-tolerant strain, Saccharomyces cerevisiae NP01.ResultsIn the batch fermentations without yeast extract, HG fermentation at 200 g/L of sugar showed the highest ethanol concentration (P_E, 90.0 g/L) and ethanol productivity (Q_E, 1.25 g/L·h). With yeast extract supplementation (9 g/L), the ethanol production efficiency increased at all sugar concentrations. The highest P_E (112.5 g/L) and Q_E (1.56 g/L·h) were observed with the VHG fermentation at 280 g/L of sugar. In the fed-batch fermentations, two feeding regimes, i.e., stepwise and continuous feedings, were studied at sugar concentrations of 280 g/L. Continuous feeding gave better results with the highest P_E and Q_E of 112.9 g/L and 2.35 g/L·h, respectively, at a feeding time of 9 h and feeding rate of 40 g sugar/h.ConclusionsIn the batch fermentation, nitrogen supplementation resulted in 4 to 32 g/L increases in ethanol production, depending on the initial sugar level in the SSJ. Under the VHG condition, with sufficient nitrogen, the fed-batch fermentation with continuous feeding resulted in a similar P_E and increased Q_P by 51% compared to those in the batch fermentation.     

Combined strategies for improving production of a thermo-alkali stable laccase in Pichia pastoris

BackgroundLaccases are copper-containing enzymes which have been used as green biocatalysts for many industrial processes. Although bacterial laccases have high stabilities which facilitate their application under harsh conditions, their activities and production yields are usually very low. In this work, we attempt to use a combinatorial strategy, including site-directed mutagenesis, codon and cultivation optimization, for improving the productivity of a thermo-alkali stable bacterial laccase in Pichia pastoris.ResultsA D500G mutant of Bacillus licheniformis LS04 laccase, which was constructed by site-directed mutagenesis, demonstrated 2.1-fold higher activity when expressed in P. pastoris. The D500G variant retained similar catalytic characteristics to the wild-type laccase, and could efficiently decolorize synthetic dyes at alkaline conditions. Various cultivation factors such as medium components, pH and temperature were investigated for their effects on laccase expression. After cultivation optimization, a laccase activity of 347 ± 7 U/L was finally achieved for D500G after 3 d of induction, which was about 9.3 times higher than that of wild-type enzyme. The protein yield under the optimized conditions was about 59 mg/L for D500G.ConclusionsThe productivity of the thermo-alkali stable laccase from B. licheniformis expressed in P. pastoris was significantly improved through the combination of site-directed mutagenesis and optimization of the cultivation process. The mutant enzyme retains good stability under high temperature and alkaline conditions, and is a good candidate for industrial application in dye decolorization.     

The exopolysaccharides biosynthesis by Candida yeast depends on carbon sources

BackgroundThe exopolysaccharides (EPS) produced by yeast exhibit physico-chemical and rheological properties, which are useful in the production of food and in the cosmetic and pharmaceutical industries as well. The effect was investigated of selected carbon sources on the biosynthesis of EPS by Candida famata and Candida guilliermondii strains originally isolated from kefirs.ResultsThe biomass yields were dependent on carbon source (sucrose, maltose, lactose, glycerol, sorbitol) and ranged from 4.13 to 7.15 g/L. The highest biomass yield was reported for C. guilliermondii after cultivation on maltose. The maximum specific productivity of EPS during cultivation on maltose was 0.505 and 0.321 for C. guilliermondii and C. famata, respectively. The highest EPS yield was found for C. guilliermondii strain. The EPS produced under these conditions contained 65.4% and 61.5% carbohydrates, respectively. The specific growth rate (μ) of C. famata in medium containing EPS as a sole carbon source was 0.0068 h^-1 and 0.0138 h^-1 for C. guilliermondii strain.ConclusionsThe most preferred carbon source in the synthesis of EPS for both Candida strains was maltose, wherein C. guilliermondii strain showed the higher yield of EPS biosynthesis. The carbon source affected the chemical composition of the resulting EPS and the contribution of carbohydrate in the precipitated preparation of polymers was higher during supplementation of maltose as compared to sucrose. It was also found that the EPS can be a source of carbon for the producing strains.     

Microbial transformation of ginsenosides extracted from Panax ginseng adventitious roots in an airlift bioreactor

BackgroundGinsenoside is the most important secondary metabolite in ginseng. Natural sources of wild ginseng have been overexploited. Although root culture can reduce the length of the growth cycle of ginseng, the number of species of ginsenosides is reduced and their contents are lower in the adventitious roots of ginseng than in the roots of ginseng cultivated in the field.ResultsIn this study, 147 strains of β-glucosidase-producing microorganisms were isolated from soil. Of these, strain K35 showed excellent activity for converting major ginsenosides into rare ginsenosides, and a NCBI BLAST of its 16S rDNA gene sequence showed that it was most closely related to Penicillium sp. (HQ608083.1). Strain K35 was used to ferment the adventitious root extract, and the fermentation products were analyzed by high-performance liquid chromatography. The results showed that the content of the rare ginsenoside CK was 0.253 mg mL^-1 under the optimal converting conditions of 9 d of fermentation at pH 7.0 in LL medium, which was significantly higher than that in the adventitious roots of ginseng.ConclusionThese findings may not only solve the problem of low productivity of metabolite in ginseng root culture but may also result in the development of a new valuable method of manufacturing ginsenoside CK.     

Strategy of oxygen transfer coefficient control on the l-erythrulose fermentation by newly isolated Gluconobacter kondonii

BackgroundThe effect of diverse oxygen transfer coefficient on the l-erythrulose production from meso-erythritol by a newly isolated strain, Gluconobacter kondonii CGMCC8391 was investigated. In order to elucidate the effects of volumetric mass transfer coefficient (k_La) on the fermentations, baffled and unbaffled flask cultures, and fed-batch cultures were developed in present work.ResultsWith the increase of the k_La value in the fed-batch culture, l-erythrulose concentration, productivity and yield were significantly improved, while cell growth was not the best in the high k_La. Thus, a two-stage oxygen supply control strategy was proposed, aimed at achieving high concentration and high productivity of l-erythrulose. During the first 12 h, k_La was controlled at 40.28 h^-1 to obtain high value for cell growth, subsequently k_La was controlled at 86.31 h^-1 to allow for high l-erythrulose accumulation.ConclusionsUnder optimal conditions, the l-erythrulose concentration, productivity, yield and DCW reached 207.9 ± 7.78 g/L, 6.50 g/L/h, 0.94 g/g, 2.68 ± 0.17 g/L, respectively. At the end of fermentation, the l-erythrulose concentration and productivity were higher than those in the previous similar reports.     

Molecular cloning,expression, and immobilization of glutamate decarboxylase from Lactobacillus fermentum YS2

BackgroundGABA (γ-aminobutyric acid) is a four-carbon nonprotein amino acid that has hypotensive, diuretic, and tranquilizing properties. Glutamate decarboxylase (GAD) is the key enzyme to generate GABA. A simple and economical method of preparing and immobilizing GAD would be helpful for GABA production. In this study, the GAD from Lactobacillus fermentum YS2 was expressed under the control of a stress-inducible promoter and was purified and immobilized in a fusion form, and its reusability was investigated.ResultsThe fusion protein CBM-GAD was expressed in Escherichia coli DH5α carrying pCROCB-gadB, which contained promoter P_rpoS, cbm3 (family 3 carbohydrate-binding module from Clostridium thermocellum) coding sequence, the gadB gene from L. fermentum YS2 coding for GAD, and the T7 terminator. After a one-step purification of CBM-GAD using regenerated amorphous cellulose (RAC) as an adsorbent, SDS-PAGE analysis revealed a clear band of 71 kDa; the specific activity of the purified fusion protein CBM-GAD reached 83.6 ± 0.7 U·mg^-1. After adsorption onto RAC, the immobilized GAD with CBM3 tag was repeatedly used for GABA synthesis. The protein-binding capacity of RAC was 174 ± 8 mg·g^-1. The immobilized CBM-GAD could repeatedly catalyze GABA synthesis, and 8% of the initial activities was retained after 10 uses. We tested the conversion of monosodium glutamate to GABA by the immobilized enzyme; the yield reached 5.15 g/L and the productivity reached 3.09 g/L·h.ConclusionsRAC could be used as an adsorbent in one-step purification and immobilization of CBM-GAD, and the immobilized enzyme could be repeatedly used to catalyze the conversion of glutamate to GABA.     

Xylanase and β-xylosidase from Penicillium janczewskii: Purification,characterization and hydrolysis of substrates

BackgroundXylanases and β-d-xylosidases are the most important enzymes responsible for the degradation of xylan, the second main constituent of plant cell walls.ResultsIn this study, the main extracellular xylanase (XYL I) and β-xylosidase (BXYL I) from the fungus Penicillium janczewskii were purified, characterized and applied for the hydrolysis of different substrates. Their molecular weights under denaturing and non-denaturing conditions were, respectively, 30.4 and 23.6 kDa for XYL I, and 100 and 200 kDa for BXYL I, indicating that the latter is homodimeric. XYL I is highly glycosylated (78%) with optimal activity in pH 6.0 at 65°C, while BXYL I presented lower sugar content (10.5%) and optimal activity in pH 5.0 at 75°C. The half-lives of XYL I at 55, 60 and 65°C were 125, 16 and 6 min, respectively. At 60°C, BXYL I retained almost 100% of the activity after 6 h. NH₄⁺, Na⁺, DTT and β-mercaptoethanol stimulated XYL I, while activation of BXYL I was not observed. Interestingly, XYL I was only partially inhibited by Hg^2 +, while BXYL I was completely inhibited. Xylobiose, xylotriose and larger xylooligosaccharides were the main products from xylan hydrolysis by XYL I. BXYL I hydrolyzed xylobiose and larger xylooligosaccharides with no activity against xylans.ConclusionThe enzymes act synergistically in the degradation of xylans, and present industrial characteristics especially in relation to optimal activity at high temperatures, prolonged stability of BXYL I at 60°C, and stability of XYL I in wide pH range.     

Indole acetic acid and ACC deaminase from endophytic bacteria improves the growth of Solanum lycopersicum

BackgroundEndophytic bacteria are ubiquitous in all plant species contributing in host plant's nutrient uptake and helping the host to improve its growth. Moringa peregrina which is a medicinal plant, growing in arid region of Arabia, was assessed for the presence of endophytic bacterial strains.ResultsPCR amplification and sequencing of 16S rRNA of bacterial endophytes revealed the 5 endophytic bacteria, in which 2 strains were from Sphingomonas sp.; 2 strains from Bacillus sp. and 1 from Methylobacterium genus. Among the endophytic bacterial strains, a strain of Bacillus subtilis LK14 has shown significant prospects in phosphate solubilization (clearing zone of 56.71 mm after 5 d), ACC deaminase (448.3 ± 2.91 nM α-ketobutyrate mg^- 1 h^- 1) and acid phosphatase activity (8.4 ± 1.2 nM mg^- 1 min^- 1). The endophytic bacteria were also assessed for their potential to produce indole-3-acetic acid (IAA). Among isolated strains, the initial spectrophotometry analysis showed significantly higher IAA production by Bacillus subtilis LK14. The diurnal production of IAA was quantified using multiple reactions monitoring method in UPLC/MS–MS. The analysis showed that LK14 produced the highest (8.7 μM) IAA on 14th d of growth. Looking at LK14 potentials, it was applied to Solanum lycopersicum, where it significantly increased the shoot and root biomass and chlorophyll (a and b) contents as compared to control plants.ConclusionThe study concludes that using endophytic bacterial strains can be bio-prospective for plant growth promotion, which might be an ideal strategy for improving growth of crops in marginal lands.     

Kernel size and weight affected by three plant bioregulators applied at bloom to Non Pareil and Carmel almond cultivars

BackgroundThe yield of almonds [Prunus dulcis (Mill.) D.A. Webb] could be low due to climatic problems and any factor improving kernel size and weight, such as the use of plant bioregulators (PBRs), should be beneficial.ResultsThree plant bioregulators: 24-epibrassinolide (BL), gibberellic acid (GA₃) and kinetin (KN) were applied at three spray concentrations to Non Pareil and Carmel cultivars, at two phenological stages during bloom, in the 2014 and 2015 seasons. The results showed significant differences (P < 0.0001). For total dry weight of Non Pareil, the best treatment was BL (30 mg·L^-1), with an average of 1.45 g, while the control was 1.30 g, at pink button during 2015. For Carmel, the best dry weight was 1.23 g, achieved with BL (30 mg·L^-1) at fallen petals in both seasons. The average dry weight of the controls varied between 1.13 and 1.18 g. The greatest almond lengths and widths in Non Pareil were 24.98 mm and 15.05 mm, achieved with BL (30 mg·L^-1) and KN (50 μL·L^-1) treatments, respectively, applied at pink button in 2015. In Carmel, the greatest length and width were 24.38 and 13.44 mm, obtained with BL (30 mg·L^-1) applied at the stages of pink button and fallen petals, respectively, in 2015. The control reached lengths between 22.33 and 23.38 mm, and widths between 11.99 and 12.93 mm.ConclusionsThe use of the bioregulators showed significant favorable effects on dry weight, length and width of kernels at harvest, in both cultivars.     

Effect of nitrogen,carbon sources and agitation speed on acetoin production of Bacillus subtilis SF4-3

BackgroundCurrently, microbial fermentation method has become the research hotspot for acetoin production. In our previous work, an acetoin-producing strain, Bacillus subtilis SF4-3, was isolated from Japanese traditional fermented food natto. However, its conversion of glucose to acetoin was relatively low. In order to achieve a high-efficient accumulation of acetoin in B. subtilis SF4-3, main medium components and fermentation conditions were evaluated in this work.ResultsThe by-products analysis showed that there existed reversible transformation between acetoin and 2,3-butanediol that was strictly responsible for acetoin production in B. subtilis SF4-3. The carbon sources, nitrogen sources and agitation speed were determined to play crucial role in the acetoin production. The optimal media (glucose·H₂O 150 g/L, yeast extract 10 g/L, corn steep dry 5 g/L, urea 2 g/L, K₂HPO₄ 0.5 g/L, MgSO₄ 0.5 g/L) were obtained. Furthermore, the low agitation speed of 300 r/min was found to be beneficial to the reversible transformation of 2,3-butanediol for acetoin production in B. subtilis SF4-3. Eventually, 48.9 g/L of acetoin and 5.5 g/L of 2,3-butanediol were obtained in a 5-L fermenter, and the specific production of acetoin was 39.12% (g/g), which accounted for 79.90% of the theoretical conversion.ConclusionsThe results indicated acetoin production of B. subtilis SF4-3 was closely related to the medium components and dissolved oxygen concentrations. It also provided a method for acetoin production via the reversible transformation of acetoin and 2,3-butanediol.     

1-Deoxynojirimycin from Bacillus subtilis improves antioxidant and antibacterial activities of juvenile Yoshitomi tilapia

BackgroundJuvenile Yoshitomi tilapia is often infected by pathogens and results in low-level survival rate. Bacillus subtilis, as a probiotic, may have beneficial effects on Y. tilapia with compound 1-deoxynojirimycin (DNJ), which has antibacterial activities. The effects of dietary probiotic supplementation on Y. tilapias were evaluated.ResultsJuvenile Y. tilapia was fed with B. subtilis for 56 d. Y. tilapia was infected by Aeromonas hydrophila and survival rate was compared. Dietary B. subtilis increased weight gain rate, specific growth, food conversion ratios and food intake rate of Y. tilapia. The diet improved the cumulative survival rate (CSR) of juvenile Y. tilapia when the concentration of B. subtilis was more than 2.05 × 10¹⁰ cfu/kg and CSR reached a maximum rate when the concentration of bacillus was 4.23 × 10¹⁰ (P < 0.05). Meanwhile, B. subtilis improved total antioxidant capacity (TAC), spleen index, the activities of serum lysozyme, alkaline phosphatase (ALP), superoxide dismutase (SOD) and catalase (CAT) (P < 0.05). In contrast, B. subtilis reduced serum aspartate aminotransferase (AST), alanine aminotransferase (ALT), malondialdehyde (MDA) and C3 complement (P < 0.05). DNJ was isolated from secondary metabolisms and proved to increase the levels of SOD, CAT and reduce the levels of AST, ALT and MDA at cell levels. After A. hydrophila infection, DNJ prevented the reduction in survival rate of Y. tilapia (P < 0.05).Conclusions1-Deoxynojirimycin from Bacillus subtilis can be used to improve the growth performance of juvenile Y. tilapia by affecting its antioxidant and antibacterial activities.     

Enhancement of ligninolytic enzyme activities in a Trametes maxima–Paecilomyces carneus co-culture: Key factors revealed after screening using a Plackett–Burman experimental design

BackgroundIn the industrial biotechnology, ligninolytic enzymes are produced by single fungal strains. Experimental evidence suggests that co-culture of ligninolytic fungi and filamentous microfungi results in an increase laccase activity. In this topic, only the ascomycete Trichoderma spp. has been studied broadly. However, fungal ligninolytic-filamentous microfungi biodiversity interaction in nature is abundant and poorly studied. The enhancement of laccase and manganese peroxidase (MnP) activities of Trametes maxima as a function of time inoculation of Paecilomyces carneus and under several culture conditions using Plackett–Burman experimental design (PBED) were investigated.ResultsThe highest increases of laccase (12,382.5 U/mg protein) and MnP (564.1 U/mg protein) activities were seen in co-cultures I3 and I5, respectively, both at 10 d after inoculation. This level of activity was significantly different from the enzyme activity in non-inoculated T. maxima (4881.0 U/mg protein and 291.8 U/mg protein for laccase and MnP, respectively). PBED results showed that laccase was increased (P < 0.05) by high levels of glucose, (NH₄)₂SO₄ and MnSO₄ and low levels of KH₂PO₄, FeSO₄ and inoculum (P < 0.05). In addition, MnP activity was increased (P < 0.05) by high yeast extract, MgSO₄, CaCl₂ and MnSO₄ concentrations.ConclusionsInteraction between indigenous fungi: T. maxima–P. carneus improves laccase and MnP activities. The inoculation time of P. carneus on T. maxima plays an important role in the laccase and MnP enhancement. The nutritional requirements for enzyme improvement in a co-culture system are different from those required for a monoculture system.