A disc-type magneto-rheologic fluid damper

A disc-type magneto-rheological fluid damper operating in shear mode is proposed in this paper, which is based on the special characteristics of the magneto-rheological (MR) fluid with rapid, reversible and dramatic change in its rheological properties by the application of an external magnetic field. The magnetic field of the disc-type MR fluid damper is analysed by the finite element method; the controllability of the disc-type MR fluid damper on the dynamic behaviour of a rotor system; and the effectiveness of the disc-type MR fluid damper in controlling the vibration of a rotor system, are studied in a flexible rotor system with an over-hung disc. It is shown that the magnetic flux density of the disc-type MR fluid damper in the working areas can significantly change with the applied current in the coil; and that the dynamic behavior of the disc-type MR fluid damper can be varied by the application of an external magnetic field produced by a low voltage electromagnetic coil. The disc-type MR fluid damper can significantly change the dynamic characteristics of a rotor system, provided that the location of the disk-type MR fluid damper is carefully chosen. The disc-type MR fluid damper is a new actuator with good dynamic characteristics for rotating machinery.     

A disc-type magneto-rheologtic fluid damper

A disc-type magneto-rheological fluid damper operating in shear mode is proposed in this paper, which is based on the special characteristics of the magneto-rheological (MR) fluid with rapid, reversible and dramatic change in its rheological properties by the application of an external magnetic field. The magnetic field of the disc-type MR fluid damper is analysed by the finite element method; the controllability of the disc-type MR fluid damper on the dynamic behaviour of a rotor system; and the effectiveness of the disc-type MR fluid damper in controlling the vibration of a rotor system, are studied in a flexible rotor system with an overhung disc. it is shown that the magnetic flux density of the disc-type MR fluid damper in the working areas can significantly change with the applied current in the coil; and that the dynamic behavior of the disc-type MR fluid damper can be varied by the application of an external magnetic field produced by a low voltage electromagnetic coil. The disc-type MR fluid damper can significantly change the dynamic characteristics of a rotor system, provided that the location of the disk-type MR fluid damper is carefully chosen. The disc-type MR fluid damper is a new actuator with good dynamic characteristics for rotating machinery. Project supported partially by the EC BRITE/EURAM program under BRPR-CT97-0544 IMPACT project and State Key Laboratory of Vibration, Shock and Noise, Shanghai Jiatong University     

电流变液阻尼器半主动控制的理论建模

This paper emphases on analyzing and investigating the mechanical behavior of electro-rheological fluid (ERF) semi-active damper. Theoretical model was developed to describe the relationship between electric field and the resistance force of ERF flowing through two parallel plane electrodes. In the model, the pressure drop along electrodes was supposed to consist of two parts: one related with viscosity and the other related with dynamic yield shear stress. The concept of yield stress influence factor was developed in     

用于被动力/力矩再现的新型磁流变液阻尼器

研制了一种用于被动力/力矩再现的新型磁流变液阻尼器,该阻尼器能够在磁场的作用下产生连续变化的阻尼力/力矩.阻尼器的结构包括一个上盖和一个下盖,一个转子设置于上盖和下盖之间,转子与上下盖之间的间隙充满磁流变液,在磁场作用下其粘度变大时,转子相对于壳体将受阻尼力作用.阻尼力矩的模型主要由以下几部分组成:一是由磁场作用于磁流变液产生的力矩,二是由磁流变液的动力粘度产生的力矩,最后是由装置的摩擦产生的力矩.由动力粘度产生的力矩可以通过简单的方法进行计算,由摩擦产生的力矩可以通过实验测得,而由磁场产生的力矩则要通过电磁场的有限元分析得到.最后,对研制的阻尼器原型进行了性能实验,检验了设计方法的有效性.     

A blended learning approach to teach fluid mechanics in engineering

This paper presents a case study on the teaching and learning of fluid mechanics at the University of Western Sydney (UWS), Australia, by applying a blended learning approach (BLA). In the adopted BLA, various flexible learning materials have been made available to the students such as online recorded lectures, online recorded tutorials, hand written tutorial solutions, discussion board and online practice quizzes. The lecture and tutorial class times have been primarily utilised to discuss confusing topics and engage students with practical issues in applying the theories learnt in fluid mechanics. Based on the data of over 734 students over a 4-year period, it has been shown that a BLA has improved the learning experience of the fluid mechanics students in UWS. The overall percentage of student satisfaction in this subject has increased by 18% in the BLA case compared with the traditional one.     

基于传感网的流体测控实训系统研究与开发

基于无线传感技术,在专业原有过程控制实训室的基础上设计了一套采用传感网实现的流体测控实训系统.该实训系统不仅将传感技术、通信技术、嵌入式技术及控制技术融于一体,而且还引入了虚拟仪器技术.整个系统结构清晰、扩展灵活,有助于大学生了解现代传感技术及其在流体测控领域中的应用.     

基于滑模控制的悬臂梁振动控制实验研究

文章首先介绍了滑模面和控制函数的选取,然后用Matlab／Simulink建立基于滑模控制的仿真模型,通过实时仿真系统dSPACE实现仿真模型与实验硬件装置的连接。采用压电陶瓷传感器采集悬臂梁振动位移,控制器输出经压电陶瓷驱动器对悬臂梁进行振动控制,控制目标是获得短的调节时间,并减小滑模控制常有的抖振．实验结果表明,设计的滑模控制器对悬臂梁的振动具有很好的抑制作用．     

递归响应法对磁流变阻尼结构的时滞补偿

控制系统中的时滞现象是影响控制效果的不可忽视的因素。文章采用递归响应法对磁流变阻尼控制系统的算法进行仿真计算,分析在不同情况下递归响应法对磁流变阻尼控制系统的时滞补偿效果,并与主动控制系统进行比较。结果表明,递归响应法对磁流变阻尼控制系统有一定的补偿效果,对主动控制系统效果更加显著。     

A Method for Reducing Noise Radiated from Structures with Vibration Absorbers by Using an Accelerated Neural Network

A method for reducing noise radiated from structures by vibration absorbers is presented. Since usual design method for the absorbers is invalid for noise reduction, the peaks of noise power in the frequency domain as cost functions are applied. Hence, the equations for obtaining optimal parameters of the absorbers become nonlinear expressions. To have the parameters, an accelerated neural network procedure has been presented.Numerical calculations have been carried out for a plate-type cantilever beam with a large width, and experimental tests have been also performed for the same beam. It is clarified that the present method is valid for reducing noise radiated from structures. As for the usual design method for the absorbers, model analysis has been given, so the number of absorbers should be the same as that of the considered modes. While the nonlinear problem can be dealt with by the present method, there is no restriction on the number of absorbers or the model number.     

基于LabVIEW的风力机叶片振动特性与控制实验系统

针对高校新能源、电气和自控专业学生普遍缺乏针对风力机叶片振动控制的实践环节,提出了基于LabVIEW的风力机叶片振动特性与控制仿真实验设计方案,该方案利用LabVIEW搭建了风力机叶片的经典颤振模型,建立叶片振动特性与控制仿真实验系统.整个仿真实验系统,可在多种典型风速场景下进行叶片振动特性实验,同时,可自行设计控制参...     

液压与气动技术课程教学改革的研究

从课程设置、教材与教学内容、教学方法和手段、师资水平、课程考核方式等方面对液压与气压传动课程的教学进行研究与改革,取得了一定的效果。     

A Blast Shock Isolation System with MRFD and Its Semi-Active Control Analysis

To effectively reduce the damage to people and devices in civil defense engineering subjected to blast shock, a blast shock isolation system with magnetorheological fluid dampers (MRFD) is proposed. MRFD can provide continuously adjustable Coulomb friction and has many advantages for semi-active control. Numerical simulation of this isolation system is finished using Matlab simulink toolbox. General semi-active control algorithms are consided based on instantaneous optimal active control algorithm. And the results indicate that the shock isolation system can work efficiently, decreasing about 93% of the peak acceleration of the isolation floor.     

A Blast Shock Isolation System with MRFD and Its Semi-Active Control Analysis

To effectively reduce the damage to people and devices in civil defense engineering subjected to blast shock, a blast shock isolation system with magnetorheological fluid dampers （MRFD） is proposed. MRFD can provide continuously adjustable Coulomb friction and has many advantages for semi-active control. Numerical simulation of this isolation system is finished using Matlab simulink toolbox. General semi-active control algorithms are consided based on instantaneous optimal active control algorithm. And the results indicate that the shock isolation system can work efficiently, decreasing about 93% of the peak acceleration of the isolation floor.     

一维铝/铅匀直杆状声子晶体带隙特性分析

通过单一改变组分材料铝或者铅的密度,以及单一改变晶格常数的取值来调节一维铝/铅匀直杆状声子晶体的带隙分布情况。结果表明：该声子晶体中,当单一增大每种材料的密度时,散射体与基体材料的密度差值增大,其入射波散射就更为强烈,也就越容易产生低频带隙;当单一增大声子晶体的晶格常数,即增加复合结构的长度时,入射波散射得就越多,透射波就越来越少,该声子晶体带隙便呈现出向低频率区域靠近的特性。     

A comparative study of conventional and supercritical fluid extraction methods for the recovery of secondary metabolites from <Emphasis Type="Italic">Syzygium campanulatum</Emphasis> Korth

Syzygium campanulatum Korth is a plant, which is a rich source of secondary metabolites (especially flavanones, chalcone, and triterpenoids). In our present study, three conventional solvent extraction (CSE) techniques and supercritical fluid extraction (SFE) techniques were performed to achieve a maximum recovery of two flavanones, chalcone, and two triterpenoids from S. campanulatum leaves. Furthermore, a Box-Behnken design was constructed for the SFE technique using pressure, temperature, and particle size as independent variables, and yields of crude extract, individual and total secondary metabolites as the dependent variables. In the CSE procedure, twenty extracts were produced using ten different solvents and three techniques (maceration, soxhletion, and reflux). An enriched extract of five secondary metabolites was collected using n-hexane:methanol (1:1) soxhletion. Using food-grade ethanol as a modifier, the SFE methods produced a higher recovery (25.5%?84.9%) of selected secondary metabolites as compared to the CSE techniques (0.92%?66.00%).