Electrowetting on dielectric driven droplet resonance and mixing enhancement in parallel-plate configuration

This study experimentally verifies that the mixing process in a droplet can be enhanced by driving the droplet at resonant frequencies and at alternating driving frequencies using a parallel-plate electrowetting on dielectric device. The mixing time, which is defined as the time required for reaching the well-mixed state, in a resonant droplet is found to be significantly shorter than that in a non-resonant droplet. Besides, it is also found that a higher driving potential leads to a better mixing effect, especially at resonant frequencies. Furthermore, when a droplet is driven by alternating two driving frequencies, especially two resonant frequencies, the mixing efficiency is found to be significantly enhanced for a specific alternating duration of these two frequencies.     

Resistive pulse sensing of magnetic beads and supraparticle structures using tunable pores

Tunable pores (TPs) have been used for resistive pulse sensing of 1 μm superparamagnetic beads, both dispersed and within a magnetic field. Upon application of this field, magnetic supraparticle structures (SPSs) were observed. Onset of aggregation was most effectively indicated by an increase in the mean event magnitude, with data collected using an automated thresholding method. Simulations enabled discrimination between resistive pulses caused by dimers and individual particles. Distinct but time-correlated peaks were often observed, suggesting that SPSs became separated in pressure-driven flow focused at the pore constriction. The distinct properties of magnetophoretic and pressure-driven transport mechanisms can explain variations in the event rate when particles move through an asymmetric pore in either direction, with or without a magnetic field applied. Use of TPs for resistive pulse sensing holds potential for efficient, versatile analysis and measurement of nano- and microparticles, while magnetic beads and particle aggregation play important roles in many prospective biosensing applications.     

Rapid and cost-effective fabrication of selectively permeable calcium-alginate microfluidic device using ��modified�� embedded template method

In this paper, we have presented a non-lithographic embedded template method for rapid and cost-effective fabrication of a selectively permeable calcium-alginate (Ca-alginate) based microfluidic device with long serpentine delay channel. To demonstrate the versatility of the presented method, we have demonstrated two different strategies to fabricate serpentine long delay channels without using any sophisticated microfabrication techniques, in formal lab atmosphere. The procedure presented here, also, enables the preparation of a multilayered microfluidic device with channels of varying dimensions, in a single device without using any sophisticated micromachining instrumentation. In addition, we have also qualitatively studied the diffusion of small and large molecules from a Ca-alginate based microfluidic device and proposed a method to effectively control the out-flow of macro biomolecules from the crosslinked Ca-alginate matrix to create a selectively permeable matrix required for various biological and biomimetic applications, as mentioned in the Introduction section of this work.     

Gravity-oriented microfluidic device for uniform and massive cell spheroid formation

We propose a simple method for forming massive and uniform three-dimensional (3-D) cell spheroids in a multi-level structured microfluidic device by gravitational force. The concept of orienting the device vertically has allowed spheroid formation, long-term perfusion, and retrieval of the cultured spheroids by user-friendly standard pipetting. We have successfully formed, perfused, and retrieved uniform, size-controllable, well-conditioned spheroids of human embryonic kidney 293 cells (HEK 293) in the gravity-oriented microfluidic device. We expect the proposed method will be a useful tool to study in-vitro 3-D cell models for the proliferation, differentiation, and metabolism of embryoid bodies or tumours.     

Rapid detection of live methicillin-resistant Staphylococcus aureus by using an integrated microfluidic system capable of ethidium monoazide pre-treatment and molecular diagnosis

Methicillin-resistant Staphylococcus aureus (MRSA) is a bacterium resistant to all existing penicillin and lactam-based antimicrobial drugs and, therefore, has become one of the most prevalent antibiotic-resistant pathogens found in hospitals. The multi-drug resistant characteristics of MRSA make it challenging to clinically treat infected patients. Therefore, early diagnosis of MRSA has become a public-health priority worldwide. Conventionally, cell-culture based methodology and microscopic identification are commonly used for MRSA detection. However, they are relatively time-consuming and labor-intensive. Recently, molecular diagnosis based on nucleic acid amplification techniques, such as polymerase chain reaction (PCR), has been widely investigated for the rapid detection of MRSA. However, genomic DNA of both live and dead pathogens can be distinguished by conventional PCR. These results thus could not provide sufficient confirmation of an active infection for clinicians. In this study, live MRSA was rapidly detected by using a new integrated microfluidic system. The microfluidic system has been demonstrated to have 100% specificity to detect live MRSA with S. aureus and other pathogens commonly found in hospitals. The experimental results showed that the limit of detection for live MRSA from biosamples was approximately 10² CFU/μl. In addition, the entire diagnostic protocol, from sample pre-treatment to fluorescence observation, can be automatically completed within 2.5 h. Consequently, this microfluidic system may be a powerful tool for the rapid molecular diagnosis of live MRSA.     

Changes in biomechanics and muscle activation in injured ballet dancers during a jump-land task with turnout (Sissonne Fermée)

Large impact loading with abnormal muscle activity and motion patterns may contribute to lower extremity injuries in ballet dancers. Yet, few studies investigated the influence of injury on the ballet movement. The purpose of this study was to find the neuromuscular and biomechanical characteristics in dancers with and without ankle injury during a jump-landing Sissonne Fermée task. Twenty-two ballet dancers were recruited and divided into the injured group (n = 11) and the uninjured group (n = 11). They performed a ballet movement called "Sissonne Fermée" with reflective markers and electrodes attached to their lower extremities. Ground reaction force, joint kinematics, and muscle activity were measured. The injured dancers had greater peak ankle eversion but smaller hindfoot-to-tibial eversion angles. Also, the injured dancers had greater activity of the hamstring of the dominant leg and tibialis anterior of the non-dominant leg during the pre-landing phase. The injured dancers had greater tibialis anterior activity of the dominant leg but less muscle activity in the medial gastrocnemius of the non-dominant leg during the post-landing phase. The injured dancers had a greater co-contraction index in the non-dominant ankle and a lower loading rate. The higher co-contraction indices showed that the injured dancers required more muscle effort to control ankle stability. Furthermore, the injured dancers used a "load avoidance strategy" to protect themselves from re-injury. Neuromuscular control training of the ankle joint for ballet dancers to prevent injury is necessary.     

National Board Certified Physical Educators: perceived changes related to the certification process

In this study, we examined National Board certified physical education teachers' (NBCPETs) perceptions of change as a result of certification. Randomly selected NBCPETs (65; women = 53, men = 12) were interviewed. Analysis was done through the lens of Lawson's (1989) Model of the interactive factors Influencing workplace conditions for the Physical Education Teacher Several themes connected to teachers' views of themselves as NBCPETs surfaced. In particular more teaching reflection and a greater focus on student learning and assessment, including an increased emphasis on individualizing teaching were described. An elevation in their perceived status and credibility and expanded opportunities within the educational community also emerged. Alternatively, several NBCPETs explained that the certification process had little or no effect on their teaching     

User-satisfaction based bandwidth allocation for transmission of multiple sources of human perceptual data

In recent years, more and more point-to-point communication systems involve simultaneous transmission of multiple sources of human perceptual data over a single communication medium. For example, in a teleoperation system or a telerobotic system, streams of video, audio, and haptic data need to be sent from a field place to a remote human operator. Each type of data demands a certain range of transmission rate. This creates conflicts among these data when the available bandwidth is limited.In this paper we study the bandwidth allocation for multiple sources of human perceptual data transmitted over a rate-limited communication channel. We aim to maximize the overall user satisfaction in the data transmission, and formulate an optimization problem for the bandwidth allocation. Using either the logarithmic or exponential form of human perceptual satisfaction function, we are able to derive closed-form solutions for the optimization problem. We show that the optimal bandwidth allocation for each type of data is piecewise linear with respect to the total available bandwidth.     

Appropriate intellectual property protection and economic growth in countries at different levels of development

This paper examines how the role of patents and utility models in innovation and economic growth varies by level of economic development. Using a panel dataset of over 70 countries, we find that patent protection is an important determinant of innovation and that patentable innovations contribute to economic growth in developed countries, but not in developing. Instead, in developing economies, a minor form of intellectual property rights (IPRs) - namely utility models - is conducive to innovation and growth, controlling for other factors. Using Korean firm level data as a case study, we find that utility model innovations contribute to firm performance when firms are technologically lagging and that those minor innovations can be a learning device and thus a stepping stone for developing more patentable inventions later on. Upon reaching higher levels of technological capabilities, firms become more reliant upon patents and less on utility models. Thus the lesson here is that patent protection enhances innovation and economic growth in countries where the capacity to conduct innovative research exists. Where this capacity is weaker, a system that provides incentives to conduct minor, incremental inventions is more conducive to growth. The significance of this paper is to emphasize the importance not just of the strength of IPRs but of the appropriate type of IPRs for economic development.     

Assessment of planarity of the golf swing based on the functional swing plane of the clubhead and motion planes of the body points

The purposes of this study were (1) to determine the functional swing plane (FSP) of the clubhead and the motion planes (MPs) of the shoulder/arm points and (2) to assess planarity of the golf swing based on the FSP and the MPs. The swing motions of 14 male skilled golfers (mean handicap = -0.5 +/- 2.0) using three different clubs (driver, 5-iron, and pitching wedge) were captured by an optical motion capture system (250Hz). The FSP and MPs along with their slope/relative inclination and direction/direction of inclination were obtained using a new trajectory-plane fitting method. The slope and direction of the FSP revealed a significant club effect (p < 0.001). The relative inclination and direction of inclination of the MP showed significant point (p < 0.001) and club (p < 0.001) effects and interaction (p < 0.001). Maximum deviations of the points from the FSP revealed a significant point effect (p < 0.001) and point-club interaction (p < 0.001). It was concluded that skilled golfers exhibited well-defined and consistent FSP and MPs, and the shoulder/arm points moved on vastly different MPs and exhibited large deviations from the FSP. Skilled golfers in general exhibited semi-planar downswings with two distinct phases: a transition phase and a planar execution phase.