Shear capacity of reinforced concrete columns strengthened with CFRP sheet

INTRODUCTION There is increased need in recent years for strengthening or rehabilitation of existing reinforced concrete structures adversely affected by overloading, construction material deterioration, seismic loads, structural deformation, etc. An effective method for increasing the shear capacity of reinforced concrete columns is the use of externally bonded carbon fiber reinforced plastic (CFRP) systems (ACI, 2002). FRP systems were first applied to reinforced concrete col-umns i…     

Molecularly imprinted polymers as the extracted sorbents of clenbuterol ahead of liquid chromatographic determination

A pre-treatment methodology for clenbuterol hydrochloride (CLEN) isolation and enrichment in a complex matrix environment was developed through exploiting molecularly imprinted polymers (MIPs). CLEN-imprinted polymers were synthesized by the combined use of ally-β-cyclodextrin (ally-β-CD) and methacrylic acid (MAA), allyl-β-CD and acrylonitrile (AN), and allyl-β-CD and methyl methacrylate (MMA) as the binary functional monomers. MAA-linked allyl-β-CD MIPs (M-MAA) were characterized by Fourier transform-infrared (FT-IR) spectroscopy and a scanning electron microscope (SEM). Based upon the results, M-MAA polymers generally proved to be an excellent selective extraction compared to its references: AN-linked allyl-β-CD MIPs (M-AN) and MMA-linked allyl-β-CD MIPs (M-MMA). M-MAA polymers were eventually chosen to run through a molecularly imprinted solid-phase extraction (MISPE) micro-column to enrich CLEN residues spiked in pig livers. A high recovery was achieved, ranging from 91.03% to 96.76% with relative standard deviation (RSD) ≤4.45%.     

In vitro remineralization of hybrid layers using biomimetic analogs

Resin-dentin bond degradation is a major cause of restoration failures. The major aim of the current study was to evaluate the impact of a remineralization medium on collagen matrices of hybrid layers of three different adhesive resins using nanotechnology methods. Coronal dentin surfaces were prepared from freshly extracted premolars and bonded to composite resin using three adhesive resins (FluoroBond II, Xeno-III-Bond, and iBond). From each tooth, two central slabs were selected for the study. The slabs used as controls were immersed in a simulated body fluid (SBF). The experimental slabs were immersed in a Portland cement-based remineralization medium that contained two biomimetic analogs (biomineralization medium (BRM)). Eight slabs per group were retrieved after 1, 2, 3, and 4 months, respectively and immersed in Rhodamine B for 24 h. Confocal laser scanning microscopy was used to evaluate the permeability of hybrid layers to Rhodamine B. Data were analyzed by analysis of variance (ANOVA) and Tukey’s honest significant difference (HSD) tests. After four months, all BRM specimens exhibited a significantly smaller fluorescent area than SBF specimens, indicating a remineralization of the hybrid layer (P≤0.05). A clinically applicable biomimetic remineralization delivery system could potentially slow down bond degradation.     

A study of airfoil parameterization,modeling, and optimization based on the computational fluid dynamics method

An excellent airfoil with a high lift-to-drag ratio may decrease oil consumption and enhance the voyage. Based on NACA 0012, an improved airfoil is explored in this paper. The class/shape function transformation has been proved to be a good method for airfoil parameterization, and in this paper it is modified to improve imitation accuracy. The computational fluid dynamics method is applied to obtain numerically the aerodynamic parameters of the parameterized airfoil, and the result is proved credible by comparison with available experimental data in the open literature. A polynomial-based response surface model and the uniform Latin hypercube sampling method are employed to decrease computational cost. Finally, the nonlinear programming by quadratic Lagrangian method is utilized to modify the multi-island genetic algorithm, which has an improved optimization effect than the method used on its own. The obtained result shows that the modified class/shape function transformation method produces a better imitation of an airfoil in the nose and tail regions than the original method, and that it will satisfy the tolerance zone of the model in a wind tunnel. The response surface model based on the uniform Latin hypercube sampling method gives an accurate prediction of the lift-to-drag ratio with changes in the design variables. The numerical result of the flow around the airfoil shows reasonable agreement with the experimental data graphically and quantitatively. Ultimately, an airfoil with better capacity than the original one is acquired using the multi-island genetic algorithm based nonlinear programming by quadratic Lagrangian optimization method. The pressure contours and lift-to-drag ratio along with the attack angle have been compared with those of the original airfoil, and the results demonstrate the strength of the optimized airfoil. The process for exploring an improved airfoil through parameterization to optimization is worth referencing in future work.     

Chinese middle school teachers’ preferences regarding performance evaluation measures

Teacher performance evaluation currently is receiving unprecedented attention from policy makers, scholars, and practitioners worldwide. This study is one of the few studies of teacher perceptions regarding teacher performance measures that focus on China. We employed a quantitative dominant mixed research design to investigate Chinese teachers’ preferences for teacher performance measures and the possible reasons for their preferences. Considering the quantitative results, the surveyed Chinese teachers identified fulfillment of additional roles, collaboration with faculty and staff, and students’ test scores as the most important measures for performance evaluation. Qualitatively, the most important measures that the surveyed teachers reported were the teacher’s morality, workload, and students’ test scores.     

Biomechanical characteristics of adults walking forward and backward in water at different stride frequencies

The aim of this study was to examine spatiotemporal characteristics and joint angles during forward and backward walking in water at low and high stride frequency. Eight healthy adults (22.1 ± 1.1 years) walked forward and backward underwater at low (50 pulses) and high frequency (80 pulses) at the xiphoid process level with arms crossed at the chest. The main differences observed were that the participants presented a greater speed (0.58 vs. 0.85 m/s) and more asymmetry of the step length (1.24 vs. 1.48) at high frequency whilst the stride and step length (0.84 vs. 0.7 m and 0.43 vs. 0.35 m, respectively) were lower compared to low frequency (P < 0.05). Support phase duration was higher at forward walking than backward walking (61.2 vs. 59.0%). At initial contact, we showed that during forward walking, the ankle and hip presented more flexion than during backward walking (ankle: 84.0 vs. 91.8º and hip: 22.8 vs. 8.0º; P < 0.001). At final stance, the knee and hip were more flexed at low frequency than at high frequency (knee: 150.0 vs. 157.0º and hip: ?12.2 vs. –14.5º; P < 0.001). The knee angle showed more flexion at forward walking (134.0º) than backward walking (173.1º) (P < 0.001). In conclusion, these results show how forward and backward walking in water at different frequencies differ and contribute to a better understanding of this activity in training and rehabilitation.     

Quality of life perception of basketball master athletes: association with physical activity level and sports injuries

This study aimed to verify the prevalence and characteristics of sports injuries (SI) and determine the association between the physical activity level (PA) and SI with perception of health-related quality of life (HRQoL) in Brazilian basketball master athletes. A cross-sectional study was conducted with 410 male master athletes, between 35 and 85 years of age (mean 52.26, SD ±11.83). The HRQoL was assessed using the Medical Outcomes Study – Short Form-36. The PA was evaluated using the International Physical Activity Questionnaire. Information regarding SI was collected using the Reported Morbidity Survey. Poisson regression, as estimated by the prevalence ratio (PR), was used as a measure of the association of PA and SI with HRQoL. The majority of athletes showed a high SI prevalence (58.3%) and reported one injury (67.8%) that occurred during training (61.1%) and primarily affected a lower limb (74.6%). The adjusted regression models showed a positive association of PA with the Functional Capacity (PR = 1.46, 95% confidence interval [CI] = 1.12–1.90) and Physical Component (PR = 1.32, 95% CI = 1.03–1.70) of HRQoL. Furthermore, the SI were negatively associated with HRQoL in Functional Capacity (PR = 1.85, 95% CI = 1.51–2.27), Physical Aspects (PR = 3.99, 95% CI = 3.08–5.18), Pain (PR = 1.65, 95% CI = 1.26–2.16), Social Functioning (PR = 1.79, 95% CI = 1.41–2.27), Emotional Aspects (PR = 4.40, 95% CI = 3.35–5.78), Mental Health domains (PR = 1.37, 95% CI = 1.06–1.68), Physical Component (PR = 2.35, 95% CI = 1.90–2.90) and Mental Component (PR = 2.65, 95% CI = 2.14–3.29). These results highlighted that master athletes showed a high SI prevalence, primarily in the lower limbs. PA positively correlates with the physical HRQoL domain, whereas SI may decrease the HRQoL levels of both physical and mental domains.     

Effects of 12 weeks of combined training without caloric restriction on inflammatory markers in overweight girls

The objective of the present study was to investigate the effects of combined training without caloric restriction on inflammatory markers in overweight girls. Thirty-three girls (13–17 years) were assigned into overweight training (n = 17) or overweight control (n = 16) groups. Additionally, a normal-weight group (n = 15) was used as control for the baseline values. The combined training programme consisted of six resistance exercises (three sets of 6–10 repetitions at 60–70% 1 RM) followed by 30 min of aerobic exercise (walking/running) at 50–80% VO_2peak, performed in the same 60 min session, 3 days/weeks, for 12 weeks. Body composition, dietary intake, aerobic fitness (VO_2peak), muscular strength (1 RM), glycaemia, insulinemia, lipid profile and inflammatory markers (C-reactive protein, interleukin-6, tumour necrosis factor-alpha, interleukin-10, leptin, resistin and adiponectin) were measured before and after intervention. There was a significant decrease in body fat (P < 0.01) and increase in fat-free mass (P < 0.01), VO_2peak (P < 0.01), 1 RM for leg press (P < 0.01) and bench press (P < 0.01) in the overweight training group. Concomitantly, this group presented significant decreases in serum concentrations of C-reactive protein (P < 0.05) and leptin (P < 0.05), as well as in insulin resistance (P < 0.05) after the experimental period. In conclusion, 12 weeks of combined training without caloric restriction reduced inflammatory markers associated with obesity in overweight girls.