Investigation of an Egyptian Mummy board by Using Clinical Multi-slice Computed Tomography

A modern approach to the diagnosis of artistic heritage makes use of non-destructive techniques which avoid damage to artworks or signs of interaction with the analytical technique used. For this reason, today, the employment of X-rays to study artistic heritage is quite widespread. Computed tomography (CT) Imaging was first used as specialized medical diagnostic tool in the early 1970s. Today, CT scanners have become more common, and non-destructive three-dimensional imaging has found an increasing number of uses in different areas such as materials research, geology, archaeology, and museum conservation. In this work, a new generation of clinical CT (based on the Dual Energy and multi-slice acquisition principle) is used to investigate an Egyptian wooden mummy board with a total acquisition time of 93.23 seconds and a voxel size of 0.078?×?0.078?×?1.5?mm. The use of two distinct techniques of image post-processing, the two-dimensional multi-planar reconstruction (MPR) and the three-dimensional volume rendering technique (VRT) allowed us to: evaluate the state of conservation of the mummy board, determine how the wooden object was implemented, recognize a nineteenth-century intervention of consolidation, and advance the hypothesis that the wooden planks were reused. In particular, we highlight the use of the cardiovascular and pulmonary filter with VRT reconstruction, which allows a virtual elimination of different parts of the mummy board to investigate those areas otherwise accessible only by removing parts of the board and thus damaging the work.     

Developing an overseas counsellor education program: Problems, issues, and educational implications

This article describes an example of an overseas counsellor education program. The problems, issues, and educational implications of the program are detailed.     

Factors affecting journal submission numbers: Impact factor and peer review reputation

Previous research has found that researchers rank journal reputation and impact factor (IF) amongst the key selection criteria when choosing where to submit. We explored the actual effect upon submission numbers of several possible factors. We retrieved 10 years of submission data from over a thousand journals, as well as data on IF, retractions, and other factors. We performed statistical analysis and identified correlations. We also undertook case study research on the 55 most significant submission decreases. We found a statistically significant correlation between changes in IF, ISI percentage ranking, and changes in submissions numbers in subsequent years. We also found a statistically significant effect on submission numbers in the year following the publication of a retraction. Our case studies identified other factors, including negative feedback on the peer review process. Our findings regarding IF confirm previous indications about the significance of IF on submissions. We explain the correlation with retractions through the concept of ‘peer review reputation’. These results indicate that editors and publishers need to focus on a journal's peer review practices, as well as a journal's IF, if they are to maintain and grow submissions.     

Aligning teacher competence frameworks to 21st century challenges: The case for the European Digital Competence Framework for Educators (Digcompedu)

Teachers need to update their competence profiles for 21st century challenges. Teaching strategies need to change and so do the competences teachers need to develop so as to empower 21st‐century learners. The European Framework for the Digital Competence of Educators (DigCompEdu) represents a paradigmatic example of this endeavour, taking stock of these needs. Defining the requirements of education professionals by teacher competence frameworks can serve multiple purposes at different levels in education systems. At the micro level, it can support and guide teachers' practice and continuous professional development. At the meso level of local education governance, it can support the development of school institutions as learning organisations, providing common ground for dialogue, collaboration and reflection in professional communities of practice. At the macro level of quality assurance, it can provide reference standards for initial teacher education, and for education professionals' quality along the career continuum. The European Framework for the Digital Competence of Educators was designed to align with institutional and contextual requirements in different countries, whilst remaining open to adaptation and updating. It links teachers' and students' digital competence development, and can be linked to institutional capacity building. At the same time, the framework is generic enough to apply to different educational settings and to allow for adaptation as technological possibilities and constraints evolve.     

Integrated reflectography and thermography for wooden paintings diagnostics

The need of inspecting a masterpiece of fine art without affecting it led to develop non destructive methods of investigation. In the field of art conservation, several diagnostic techniques are being widely used to inspect works of art, giving different but complementary results. The present work deals with two of these methods, reflectography and thermography, both techniques examining objects in the infrared spectrum but in different wavelength bands. Their integrated data potentially provide a powerful tool for mapping hidden features and alterations of artworks. This was confirmed during the inspections of a 13th century panel painting under restoration at the Opificio delle Pietre Dure laboratories (Florence, Italy). A graphical user interface was also designed to aid operators in the field of conservation dealing with the results of the two IR methods. Many options such as image adjustment, comparison, overlaying and transparency variation, in addition to thermographic elaborations, have been made available to users. Imaging data integration provides a multi-layered and multi-spectral representation of the painting that yields a comprehensive diagnosis confirms the anomalies individuation and reduces the ambiguities of information coming from a single diagnostic method.     

Individual differences in spatial text processing: High spatial ability can compensate for spatial working memory interference

The present study investigates the relation between spatial ability and visuo-spatial and verbal working memory in spatial text processing. In two experiments, participants listened to a spatial text (Experiments 1 and 2) and a non-spatial text (Experiment 1), at the same time performing a spatial or a verbal concurrent task, or no secondary task. To understand how individuals who differ in spatial ability process spatial text during dual task performance, spatial individual differences were analyzed. The tasks administered were the Vandenberg and Kuse [Vandenberg, S. G., & Kuse, A. R. (1978). Mental rotation, a group test of three-dimensional spatial visualization. Perceptual and Motor Skills, 47, 599-604.] mental rotation test (MRT) and a reading comprehension task (RCT). Individuals with high (HMR) and low (LMR) mental rotation differed in MRT scores but had similar RCT performance. Results showed that the HMR group, in contrast with LMR counterparts, preserved good spatial text recall even when a spatial concurrent task was performed; however, Experiment 2 revealed a modification of spatial concurrent task performance in LMR as well in HMR group. Overall, results suggest that HMR individuals have more spatial resources than LMR individuals, allowing them to compensate for spatial working memory interference, but only to a limited extent, given that the processing of spatial information is still mediated by VSWM.     

Geometrical effects in microfluidic-based microarrays for rapid, efficient single-cell capture of mammalian stem cells and plant cells

In this paper, a detailed numerical and experimental investigation into the optimisation of hydrodynamic micro-trapping arrays for high-throughput capture of single polystyrene (PS) microparticles and three different types of live cells at trapping times of 30 min or less is described. Four different trap geometries (triangular, square, conical, and elliptical) were investigated within three different device generations, in which device architecture, channel geometry, inter-trap spacing, trap size, and trap density were varied. Numerical simulation confirmed that (1) the calculated device dimensions permitted partitioned flow between the main channel and the trap channel, and further, preferential flow through the trap channel in the absence of any obstruction; (2) different trap shapes, all having the same dimensional parameters in terms of depth, trapping channel lengths and widths, main channel lengths and widths, produce contrasting streamline plots and that the interaction of the fluid with the different geometries can produce areas of stagnated flow or distorted field lines; and (3) that once trapped, any motion of the trapped particle or cell or a shift in its configuration within the trap can result in significant increases in pressures on the cell surface and variations in the shear stress distribution across the cell’s surface. Numerical outcomes were then validated experimentally in terms of the impact of these variations in device design elements on the percent occupancy of the trapping array (with one or more particles or cells) within these targeted short timeframes. Limitations on obtaining high trap occupancies in the devices were shown to be primarily a result of particle aggregation, channel clogging and the trap aperture size. These limitations could be overcome somewhat by optimisation of these device design elements and other operational variables, such as the average carrier fluid velocity. For example, for the 20 μm polystyrene microparticles, the number of filled traps increased from 32% to 42% during 5–10 min experiments in devices with smaller apertures. Similarly, a 40%–60% reduction in trapping channel size resulted in an increase in the amount of filled traps, from 0% to almost 90% in 10 min, for the human bone marrow derived mesenchymal stem cells, and 15%–85% in 15 min for the human embryonic stem cells. Last, a reduction of the average carrier fluid velocity by 50% resulted in an increase from 80% to 92% occupancy of single algae cells in traps. Interestingly, changes in the physical properties of the species being trapped also had a substantial impact, as regardless of the trap shape, higher percent occupancies were observed with cells compared to single PS microparticles in the same device, even though they are of approximately the same size. This investigation showed that in microfluidic single cell capture arrays, the trap shape that maximizes cell viability is not necessarily the most efficient for high-speed single cell capture. However, high-speed trapping configurations for delicate mammalian cells are possible but must be optimised for each cell type and designed principally in accordance with the trap size to cell size ratio.     

Conservation of stained glass windows with protective glazing: Main results from the European VIDRIO research programme

The methodology of protecting the European stained glass windows against environmental risk (e.g. meteorological factors, air pollution, microorganisms) by means of an external glazing is not new. In spite of many scientific studies carried out in the last 20 years, some questions were still up for discussion. The European VIDRIO (2002–2005) project gave an answer to these questions. The research carried out by the different project partners established a new multidisciplinary approach aimed at evaluating the efficiency of the protective glazing systems and their effects on stained glass windows conservation, and finally at assessing the most appropriate strategy to preserve stained glass windows. Scientific results showed that the so-called isothermal glazing (i.e. ventilation by the air coming from the inside of the building) protected efficiently the ancient stained glass window from environmental attack (i.e. rain, pollutants, condensation, thermal shocks) with very limited secondary effects. The scientific research highlighted that its efficiency was strongly related to the technical design of the protective system. In particular, the ventilation and the size of the interspace had to be carefully considered. The research developed within the VIDRIO project was turned into general recommendations to the owners and practitioners on the best practice for the stained glass windows future conservation.     

Meeting players where they are: Digital games and learning ecologies

This paper explores the relationship between digital games and learning along the continuum from formal to informal learning. Games are an increasingly important component of our learning ecologies but their potential can prove difficult to fully harness due to the downsides of gaming in informal contexts and to the limitations games can present when adopted in formal learning contexts. The aim of this paper is to shed light on the strengths and weaknesses of games for learning, and to gather stakeholder recommendations for the main actors in the field. The adopted research approach is qualitative and participatory, involving players, teachers, parents, researchers and developers. Data from 25 interviews and 11 focus groups yielded insights into the educational, psychological and ethical aspects of play. Results suggest that gameplay influences individuals in a very personal manner, and that its effects cover a wide range of skills, extending to identity development. Hence, to harness this potential, all actors in the ecology need strong awareness of both the affordances and the risks of games, and deep respect for individuals’ LEs. The study has implications for a wide range of actors, including educators, players, researchers, parents, game developers and policymakers.