Kinematics of cycling in relation to anterior knee pain and patellar tendinitis

The coronal and sagittal plane leg movements of 24 experienced male cyclists were assessed using video analysis while cycling on a Kingcycle windload simulator. The cyclists were grouped into those with a history of injury and an asymptomatic group on the basis of self-reported injury status. The ages, cycling experience, competition distances and competition speeds of the two groups were compared using Student's t-test. No significant differences (P < 0.05) were found for any of these variables. The maximum and minimum shank adduction, shank adduction velocities, knee flexion and ankle dorsiflexion values were also compared using Student's t-test. Significant differences were found at the point of maximum adduction (1.9 degrees; P = 0.019) and minimum dorsiflexion (4.9 degrees; P = 0.014). These differences indicated more dorsiflexion and greater abduction on the part of the symptomatic cyclists, supporting previous research that found that cyclists with a history of injury differ from those without a history of injury in the coronal plane leg movement patterns they adopt. Also, the most extreme medial position of the knee relative to the ankle occurred during knee extension. This supports the potential injury mechanism proposed by Francis (1986), which had previously only been examined using coronal plane kinematics.     

The coach-athlete relationship: a motivational model

The aim of this paper is to present a motivational model of the coach-athlete relationship that describes how coaches may influence athletes' motivation. In line with cognitive evaluation theory (Deci and Ryan, 1980, 1985) and the hierarchical model of intrinsic and extrinsic motivation (Vallerand, 1997, 2000), a motivational sequence is proposed where coaches' personal orientation towards coaching, the context within which they operate, and their perceptions of their athletes' behaviour and motivation influence coaches' behaviours. Also, coaches' behaviours in the form of autonomy-supportive behaviours, provision of structure and involvement have a beneficial impact on athletes' needs for autonomy, competence and relatedness, which, in turn, nurture athletes' intrinsic motivation and self-determined types of extrinsic motivation. Here, we first review coaches' autonomy-supportive behaviours. We then describe the psychological processes through which coaching behaviours have a positive influence on athletes' intrinsic and self-determined extrinsic motivation. Finally, we identify social and personality processes that determine coaching behaviours.     

Science and cycling: current knowledge and future directions for research

In this holistic review of cycling science, the objectives are: (1) to identify the various human and environmental factors that influence cycling power output and velocity; (2) to discuss, with the aid of a schematic model, the often complex interrelationships between these factors; and (3) to suggest future directions for research to help clarify how cycling performance can be optimized, given different race disciplines, environments and riders. Most successful cyclists, irrespective of the race discipline, have a high maximal aerobic power output measured from an incremental test, and an ability to work at relatively high power outputs for long periods. The relationship between these characteristics and inherent physiological factors such as muscle capilliarization and muscle fibre type is complicated by inter-individual differences in selecting cadence for different race conditions. More research is needed on high-class professional riders, since they probably represent the pinnacle of natural selection for, and physiological adaptation to, endurance exercise. Recent advances in mathematical modelling and bicycle-mounted strain gauges, which can measure power directly in races, are starting to help unravel the interrelationships between the various resistive forces on the bicycle (e.g. air and rolling resistance, gravity). Interventions on rider position to optimize aerodynamics should also consider the impact on power output of the rider. All-terrain bicycle (ATB) racing is a neglected discipline in terms of the characterization of power outputs in race conditions and the modelling of the effects of the different design of bicycle frame and components on the magnitude of resistive forces. A direct application of mathematical models of cycling velocity has been in identifying optimal pacing strategies for different race conditions. Such data should, nevertheless, be considered alongside physiological optimization of power output in a race. An even distribution of power output is both physiologically and biophysically optimal for longer ( > 4 km) time-trials held in conditions of unvarying wind and gradient. For shorter races (e.g. a 1 km time-trial), an 'all out' effort from the start is advised to 'save' time during the initial phase that contributes most to total race time and to optimize the contribution of kinetic energy to race velocity. From a biophysical standpoint, the optimum pacing strategy for road time-trials may involve increasing power in headwinds and uphill sections and decreasing power in tailwinds and when travelling downhill. More research, using models and direct power measurement, is needed to elucidate fully how much such a pacing strategy might save time in a real race and how much a variable power output can be tolerated by a rider. The cyclist's diet is a multifactorial issue in itself and many researchers have tried to examine aspects of cycling nutrition (e.g. timing, amount, composition) in isolation. Only recently have researchers attempted to analyse interrelationships between dietary factors (e.g. the link between pre-race and in-race dietary effects on performance). The thermal environment is a mediating factor in choice of diet, since there may be competing interests of replacing lost fluid and depleted glycogen during and after a race. Given the prevalence of stage racing in professional cycling, more research into the influence of nutrition on repeated bouts of exercise performance and training is required.     

Lunge performance and its determinants

For activities such as squash, badminton and fencing, the ability to quickly complete a lunge and return to the start or move off in another direction is critical for success. Determining which strength qualities are important predictors of lunge performance was the focus of this study. Thirty-one male athletes performed: (1) a unilateral maximal squat (one-repetition maximum, 1-RM) and unilateral jump squat (50% 1-RM) on an instrumented supine squat machine, and (2) a forward lunge while attached to a linear transducer. We performed stepwise multiple regression analysis with lunge performance as the dependent variable and various strength, flexibility and anthropometric measures as the independent variables. From the many strength and power measures calculated, time to peak force was the best single predictor of lunge performance, which accounted for 55% of the explained variance. The best three-variable model for predicting lunge performance accounted for 76-85% of the explained variance. The models differed, however, according to whether lunge performance was expressed relative to body mass (time to peak force, mean power and relative strength = 76%) or taken as an absolute value (time to peak force, leg length and flexibility = 85%). We conclude that one to two trials were reliable for strength diagnosis and that one strength measure cannot accurately explain functional performance because other factors, such as body mass, flexibility and leg length, have diverse effects on the statistical models.     

Techniques used in high-scoring and low-scoring 'Roche' vaults performed by elite male gymnasts

The 16 highest-scored Roche vaults (G1) performed during the 2000 Olympic Games were compared with those receiving the 16 lowest-scores (G2). A 16-mm motion picture camera operating at 100 Hz recorded the vaults during the competition. The results of t tests (p < .05) indicated G1, compared to G2, had (a) shorter time of board support, greater normalised average upward vertical force and backward horizontal force exerted by the board, greater change in the vertical velocity while on the board, and greater vertical velocity at board take-off, (b) comparable linear and angular motions in pre-flight, (c) smaller backward horizontal impulse exerted by the horse, smaller loss of the horizontal velocity while on the horse, and greater horizontal and vertical velocities at horse take-off, (d) greater height and larger horizontal distance of post-flight, (e) higher body mass centre at knee release, and (f) higher mass centre, greater normalised moment of inertia, and smaller vertical velocity at mat touchdown. Therefore, gymnasts and coaches should focus on sprinting the approach; blocking and pushing-off the take-off board rapidly and vigorously; departing the board with a large vertical velocity; exerting large downward vertical force and small forward horizontal force from the hand-stand position while on the horse; departing the horse with large horizontal and vertical velocities; and completing the majority of the double salto forward near the peak of trajectory and releasing the knees above the top of the horse to prepare for a controlled landing.     

Impact absorption of tennis shoe-surface combinations

The aim of this study was to investigate, for typical shoes and surfaces used in tennis, the relative role of the shoe and surface in providing cushioning during running. Five test surfaces ranging from concrete to artificial turf were selected, together with two shoe models. Impact absorbing ability was assessed mechanically using drop test procedures and biomechanically using peak magnitude and rate of loading of impact force and peak in-shoe pressure data at the lateral heel. Differences in biomechanical variables between shoe-surface combinations were identified using a two-way ANOVA (p < 0.05). Mechanical test results were found to rank the surfaces in the same order regardless of the shoe model, suggesting that the surface is influential in providing cushioning. However, for all mechanical and biomechanical (p < 0.05) variables representing impact absorbing ability, it was found that the difference between shoes was markedly greater than the differences between surfaces. The peak heel pressure data were found to rank the surfaces in the same order as the mechanical tests, while impact force data were not as sensitive to the changes in surface. Correlations between mechanical and biomechanical impact absorption highlighted the importance of testing the shoe-surface combination in mechanical tests, rather than the surface alone. In conclusion, mechanical testing of the shoe-surface combination was found to provide a strong predictor of the impact absorbing ability during running if pressure data were used. In addition, for typical shoe-surface combinations in tennis, the shoe was found to have more potential than the surface to influence impact loading during running. Finally, in-shoe pressure data were found to be more sensitive than force plate data to changes in material cushioning.     

Severity and cost of injuries in amateur rugby league: a case study

The aim of this study was to determine the severity and cost of injuries in amateur rugby league. Seventy-two amateur rugby league players aged 28 +/- 6 years (mean +/- s) were surveyed at the end of a competitive season. An injury was defined as any pain, disability or injury that occurred as a result of a competition game which caused the player to miss subsequent games. Injuries were classified as minor (one game missed), moderate (two to four games missed) and major (five or more games missed). Of the 72 questionnaires distributed, 34 (47.2%) were returned. Twenty respondents (58.8%) sustained an injury that resulted in one or more missed games. Eight injured players (40.0%) missed five or more training sessions, six of whom (30%) missed five or more games as a result of the injury. The median time lost from employment or study for all injured players was 2 days per playing injury. The respective median direct (e.g. medical expenses) and indirect (e.g. wages lost) costs associated with the injury were 28.29 pounds and 77.04 pound per playing injury. A considerable proportion of injuries sustained in the present sample of amateur rugby league players were major, resulting in a loss of training, playing and employment or study time, and these injuries were associated with significant direct and indirect economic costs. Further studies, using a larger sample, would complement the present findings in establishing the severity and cost of amateur rugby league injuries. These results suggest that prevention strategies are required to reduce the severity and cost of amateur rugby league injuries.     

The influence of self-efficacy and past behaviour on the physical activity intentions of young people

The aim of the present study was to assess the influence of self-efficacy and past behaviour on young people's physical activity intentions using an augmented version of Ajzen's Theory of Planned Behaviour. We hypothesized that self-efficacy would exhibit discriminant validity with perceived behavioural control and explain unique variance in young people's intentions to participate in physical activity. We also expected that past physical activity behaviour would attenuate the influence of attitude, subjective norms, perceived behavioural control and self-efficacy on intention. The sample comprised 1,152 young people aged 13.5 +/- 0.6 years (mean +/- s) who completed inventories assessing their physical activity intentions, attitudes, subjective norms, perceived behavioural control, self-efficacy and past physical activity behaviour. A confirmatory factor analysis demonstrated that the constructs of the Theory of Planned Behaviour achieved discriminant validity. Furthermore, the measures of attitudes, subjective norms, perceived behavioural control and self-efficacy were significantly related to their respective belief-based measures, supporting the concurrent validity of the measures of the Theory of Planned Behaviour. A non-standard structural equation model demonstrated that attitude and self-efficacy were strong predictors of physical activity intention, but perceived behavioural control and subjective norms were not. Self-efficacy attenuated the influence of attitudes and perceived behavioural control on intention. Past behaviour predicted intention directly and indirectly through self-efficacy and attitude. The present findings demonstrate that young people with positive attitudes and high self-efficacy are more likely to form intentions to participate in physical activity. Furthermore, controlling for past physical activity behaviour revealed that the unique effects of self-efficacy and attitudes on young people's physical activity intentions were unaltered.