The influence of intermittent high-intensity shuttle running and fluid ingestion on the performance of a soccer skill

The aim of this study was to examine the effect of intermittent high-intensity shuttle running and fluid ingestion on the performance of a soccer skill. Nine semi-professional soccer players volunteered to participate in the study. Their mean (± _sx ) age, body mass and maximal oxygen uptake were 20.2 ± 0.4 years, 73.2 ± 1.8 kg and 59.1 ± 1.3 ml·kg^-1 ·min^-1 respectively. The players were allocated to two randomly assigned trials: ingesting or abstaining from fluid intake during a 90 min intermittent exercise protocol (Loughborough Intermittent Shuttle Test:LIST).This test was designed to simulate the minimum physical demands faced by soccer players during a game. Before and immediately after performance of the test,the players completed a soccer skill test and a mental concentration test. Performance of the soccer skill test after the 'no-fluid' trial deteriorated by 5% (P ? 0.05),but was maintained during the fluid trial. Mean heart rate, perceived exertion, serum aldosterone, osmolality, sodium and cortisol responses during the test were higher (P ? 0.05) in the 'no-fluid' trial than in the fluid trial. The results of this study suggest that soccer players should consume fluid throughout a game to help prevent a deterioration in skill performance.     

Matching of Male and Female Subjects Using VO2 max

Abstract

We compared cardiorespiratory responses to exercise on an underwater treadmill (UTM) and land treadmill (LTM) and derived an equation to estimate oxygen consumption (VO₂) during UTM exercise. Fifty-five men and women completed one LTM and five UTM exercise sessions on separate days. The UTM sessions consisted of chest-deep immersion, with 0, 25, 50, 75, and 100% water-jet resistance. All session treadmill velocities increased every 3 min from 53.6 to 187.8 m·min^-1. Cardiorespiratory responses were similar between LTM and UTM when jet resistance for UTM was ≥ 50%. Using multiple regression analysis, weight-relative VO₂ could be estimated as: VO₂ (mLO₂·kg^-1·min^-1) = 0.19248 · height (cm) + 0.17422 · jet resistance (% max) + 0.14092 · velocity (m·min^-1) - 0.12794 · weight (kg) - 27.82849, R²= .82. Our data indicate that similar LTM and UTM cardiorespiratory responses are achievable, and we provide a reasonable estimate of UTM VO₂.     

Responses to Forces Influencing Cohesion As a Function of Player Status and Level of Male Varsity Basketball Competition

Abstract

This exploratory study determined if the responses of male varsity basketball players to six factors influencing cohesion were a function of level of competitive intensity and/or the importance of the players to their team. Players on intact teams from five levels of competition – elementary school, junior high school, senior high school, small college and large college–responded to a cohesion questionnaire at the end of the season. Coaches designated five players with the most game playing time as “starters” and five players with the least game playing time as “reserves.” A team factor score for Team Performance Satisfaction, Self Performance Satisfaction, Task Cohesion, Affiliation Cohesion, Desire for Recognition and Value of Membership was calculated. Each team factor score served as the dependent variable in a 2 (player status) × 5 (level of competition) analysis ofcovariance design, with teams nested in the second factor. The won-loss record served as the covariate. Results indicated that “starters” were more satisfied with their own performance, were more task conscious, had a greater affiliation desire, and valued their membership on the team to a greater degree than the “reserves.” The elementary and junior high school team members were significantly more satisfied with the team's performance, were more satisfied with their own self performance, were more affiliation conscious, and valued their team membership to a greater degree than did college team members. The interaction between player status and level of competition was not significant for any of the factor scores.     

Theoretical Analysis of Aggressive Golf Putts

Abstract

The present study examined the relationship between students' perceptions of the motivational climate and beliefs about the causes of success, preference for challenging tasks, and satisfaction in physical education. Responses of 50 female and 46 male students (M age = 12.08 years; SD = .72) showed that perceptions of a mastery-oriented motivational climate were related to the belief that motivation or effort caused success and satisfaction. In contrast, perceptions of a performance climate were related to the belief that deception caused success and related negatively to the students' preference for challenging tasks. Results of hierarchical regression analyses revealed that perceptions of the motivational climate explained a significant amount of unique variance in the students' responses after controlling for dispositional goal orientations. The results suggest that the teacher can influence the salience of a mastery-oriented climate and, in so doing, optimize a child's motivation in physical education.     

The Effects of Age and Number of Demonstrations on Modeling of Form and Performance

Abstract

This study was designed to investigate the effects of age and number of demonstrations on both form (strategy employed) and physical performance on a Bachman ladder-balance task. College age (n = 60) and elementary age females (n = 60) were compared under four modeling conditions consisting of no, four, eight, and 12 demonstrations in an Age Group × Demonstration Group (2 × 4) MANOVA. Results indicated that college age students had higher performance and form scores than elementary age students. Only form differentiated the four demonstration groups. Participants receiving 12 demonstrations had higher form scores than the control participants. Form scores were analyzed in a discriminant function analysis to determine which of five form components differentiated the four demonstration groups. Results also revealed that climbing quickly was the component of form that differentiated the groups the most. It was concluded that matching form by the learner may be a more effective measure of modeling effects rather than inferring modeling from performance, especially in the initial stages of learning. In addition, it appears that the number of demonstrations needed to create modeling effects is task specific and dependent on the length of the practice period.     

Prolonged static stretching does not influence running economy despite changes in neuromuscular function

The aim of this study was to examine the acute effects of prolonged static stretching (SS) on running economy. Ten male runners (VO2(peak) 60.1 +/- 7.3 ml x kg(-1) x min(-1)) performed 10 min of treadmill running at 70% VO2(peak) before and after SS and no stretching interventions. For the stretching intervention, each leg was stretched unilaterally for 40 s with each of eight different exercises and this was repeated three times. Respiratory gas exchange was measured throughout the running exercise with an automated gas analysis system. On a separate day, participants were tested for sit and reach range of motion, isometric strength and countermovement jump height before and after SS. The oxygen uptake, minute ventilation, energy expenditure, respiratory exchange ratio and heart rate responses to running were unaffected by the stretching intervention. This was despite a significant effect of SS on neuromuscular function (sit and reach range of motion, +2.7 +/- 0.6 cm; isometric strength, -5.6% +/- 3.4%; countermovement jump height -5.5% +/- 3.4%; all P < 0.05). The results suggest that prolonged SS does not influence running economy despite changes in neuromuscular function.     

Stress analysis of anisotropic thick laminates in cylindrical bending using a semi-analytical approach

Semi-analytical elasticity solutions for bending of angle-ply laminates in cylindrical bending are presented using the state-space-based differential quadrature method (SSDQM). Partial differential state equation is derived from the basic equations of elasticity based on the state space concept. Then, the differential quadrature (DQ) technique is introduced to discretize the longitu- dinal domain of the plate so that a series of ordinary differential state equations are obtained at the discrete points. Meanwhile, the edge constrained conditions are handled directly using the stress and displacement components without the Saint-Venant principle. The thickness domain is solved analytically based on the state space formalism along with the continuity conditions at interfaces. The present method is validated by comparing the results to the exact solutions of Pagano’s problem. Numerical results for fully clamped thick laminates are presented, and the influences of ply angle on stress distributions are discussed.     

Student Perceptions of Chemistry Laboratory Learning Environments, Student–Teacher Interactions and Attitudes in Secondary School Gifted Education Classes in Singapore

This study investigated the chemistry laboratory classroom environment, teacher–student interactions and student attitudes towards chemistry among 497 gifted and non-gifted secondary-school students in Singapore. The data were collected using the 35-item Chemistry Laboratory Environment Inventory (CLEI), the 48-item Questionnaire on Teacher Interaction (QTI) and the 30-item Questionnaire on Chemistry-Related Attitudes (QOCRA). Results supported the validity and reliability of the CLEI and QTI for this sample. Stream (gifted versus non-gifted) and gender differences were found in actual and preferred chemistry laboratory classroom environments and teacher–student interactions. Some statistically significant associations of modest magnitude were found between students' attitudes towards chemistry and both the laboratory classroom environment and the interpersonal behaviour of chemistry teachers. Suggestions for improving chemistry laboratory classroom environments and the teacher–student interactions for gifted students are provided.     

Initial and Further Education: Substitutes or Complements? Differences in Continuing Education and Training over the Life-Course of European Workers

This investigation examines the place of initial and further education in continuing education and training over the life-course of workers across Europe. The evidence presented demonstrates that in countries with a strong orientation towards vocational education, participation in continuing education and training among employees is higher than in countries that mainly provide general education. Moreover, it can be seen that the effect of the vocational orientation of the education system increases over the life-course of workers. The conclusion of this investigation is that further education complements rather than substitutes for initial education. This implies that national education and training policies meant to encourage lifelong learning should not only attempt to expand or redirect training received by already experienced workers, but also try to facilitate participation in initial vocational training.     

Promoting technology integration through collaborative apprenticeship

Teachers often learn technology skills and integration strategies in intensive seminars, ineffective means for professional learning because experiences are seldom transferred to instructional practices. Thus, effective technology integration requires teachers to obtain learning experiences within the context of their teaching so they can practice, reflect, and modify their practices. Learning in a teaching community is a social process that involves ongoing, on-site, and just-in-time support. Teachers need avenues to continually interact to provide such support across all members of the community. Collaborative Apprenticeship, a professional development model featuring reciprocal interactions, is one such approach to promoting technology integration. Teachers experienced in technology use serve as mentors of peer-teachers' technology applications aimed at improving instruction. Technology is progressively infused as peer-teachers learn to design technology-rich lessons from their technology-savvy peers through modeling, collaboration, and coaching.