A study of airfoil parameterization,modeling, and optimization based on the computational fluid dynamics method

An excellent airfoil with a high lift-to-drag ratio may decrease oil consumption and enhance the voyage. Based on NACA 0012, an improved airfoil is explored in this paper. The class/shape function transformation has been proved to be a good method for airfoil parameterization, and in this paper it is modified to improve imitation accuracy. The computational fluid dynamics method is applied to obtain numerically the aerodynamic parameters of the parameterized airfoil, and the result is proved credible by comparison with available experimental data in the open literature. A polynomial-based response surface model and the uniform Latin hypercube sampling method are employed to decrease computational cost. Finally, the nonlinear programming by quadratic Lagrangian method is utilized to modify the multi-island genetic algorithm, which has an improved optimization effect than the method used on its own. The obtained result shows that the modified class/shape function transformation method produces a better imitation of an airfoil in the nose and tail regions than the original method, and that it will satisfy the tolerance zone of the model in a wind tunnel. The response surface model based on the uniform Latin hypercube sampling method gives an accurate prediction of the lift-to-drag ratio with changes in the design variables. The numerical result of the flow around the airfoil shows reasonable agreement with the experimental data graphically and quantitatively. Ultimately, an airfoil with better capacity than the original one is acquired using the multi-island genetic algorithm based nonlinear programming by quadratic Lagrangian optimization method. The pressure contours and lift-to-drag ratio along with the attack angle have been compared with those of the original airfoil, and the results demonstrate the strength of the optimized airfoil. The process for exploring an improved airfoil through parameterization to optimization is worth referencing in future work.     

Chinese middle school teachers’ preferences regarding performance evaluation measures

Teacher performance evaluation currently is receiving unprecedented attention from policy makers, scholars, and practitioners worldwide. This study is one of the few studies of teacher perceptions regarding teacher performance measures that focus on China. We employed a quantitative dominant mixed research design to investigate Chinese teachers’ preferences for teacher performance measures and the possible reasons for their preferences. Considering the quantitative results, the surveyed Chinese teachers identified fulfillment of additional roles, collaboration with faculty and staff, and students’ test scores as the most important measures for performance evaluation. Qualitatively, the most important measures that the surveyed teachers reported were the teacher’s morality, workload, and students’ test scores.     

The key to success in elite athletes? Explicit and implicit motor learning in youth elite and non-elite soccer players

In sports, fast and accurate execution of movements is required. It has been shown that implicitly learned movements might be less vulnerable than explicitly learned movements to stressful and fast changing circumstances that exist at the elite sports level. The present study provides insight in explicit and implicit motor learning in youth soccer players with different expertise levels. Twenty-seven youth elite soccer players and 25 non-elite soccer players (aged 10–12) performed a serial reaction time task (SRTT). In the SRTT, one of the sequences must be learned explicitly, the other was implicitly learned. No main effect of group was found for implicit and explicit learning on mean reaction time (MRT) and accuracy. However, for MRT, an interaction was found between learning condition, learning phase and group. Analyses showed no group effects for the explicit learning condition, but youth elite soccer players showed better learning in the implicit learning condition. In particular, during implicit motor learning youth elite soccer showed faster MRTs in the early learning phase and earlier reached asymptote performance in terms of MRT. Present findings may be important for sports because children with superior implicit learning abilities in early learning phases may be able to learn more (durable) motor skills in a shorter time period as compared to other children.     

Bedingungen der Bindungswirkung inkrementeller Normen in Fußballvereinen

Sports clubs depend on the pooling of resources by their members. The supportive distribution of the resources within a club is facilitated in particular by the effectiveness of incremental standards. A basic prerequisite for a fair distribution of resources is a minimum of community spirit among the members. Based on a nationwide survey of football clubs and an ordinal logistic regression model, factors were determined that reflect the extent of the community spirit within a club. The opening up of the club by payment to players and perceived problems with acquiring and binding of volunteers are associated with a reduction of community spirit. In contrast, the perception that the club activities can be continued in the long term shows a positive correlation to a highly developed community spirit.     

A channel distortion model for video over lossy packet networks

Error-resilient video communication over lossy packet networks is often designed and operated based on models for the effect of losses on the reconstructed video quality. This paper analyzes the channel distortion for video over lossy packet networks and proposes a new model that, compared to previous models, more accurately estimates the expected mean-squared error distortion for different packet loss patterns by accounting for inter-frame error propagation and the correlation between error frames. The accuracy of the proposed model is validated with JVT/H.264 encoded standard test sequences and previous frame concealment, where the proposed model provides an obvious accuracy gain over previous models.     

Socialisation into organised sports of young adolescents with a lower socio-economic status

Studies investigating sport socialisation often focussed on the barriers for youngsters from lower socio-economic status (SES) families to participate in sport. In the present study, the socialisation into sports of young adolescents from lower SES families that do participate in organised sports was investigated. A total of 9 girls and 12 boys from lower SES families (18 Dutch; three foreign ethnic background) from one city in the Netherlands who participated in organised sport were interviewed. Although multiple agents may be of influence on the socialisation process, this study was limited to the family, school and peers as potential socialising contexts. Drawing on the theoretical work of Bourdieu and Bernstein, parents were found to be the main influencers of the sports habitus of these young adolescents. The school context appeared to have no influence on their sport socialisation. Peers were found to have an influence on the choice for a specific type of sport. This interplay between socialising contexts for young adolescents from lower SES families is similar to the sport socialisation of youngsters from higher SES families. Therefore, it is suggested that if sport socialisation takes place, then the role of SES is less pronounced than often assumed. Moreover, there seem to be differences in the relative importance of the socialising contexts with younger children with a lower SES. Therefore, it is hypothesised that the relative importance of socialising agents changes over time. Although the findings may be limited to the specific sample of this study, they provide hypotheses that challenge the often-presumed importance of SES if sport socialisation takes place.     

A review of tennis racket performance parameters

The application of advanced engineering to tennis racket design has influenced the nature of the sport. As a result, the International Tennis Federation has established rules to limit performance, with the aim of protecting the nature of the game. This paper illustrates how changes to the racket affect the player-racket system. The review integrates engineering and biomechanical issues related to tennis racket performance, covering the biomechanical characteristics of tennis strokes, tennis racket performance, the effect of racket parameters on ball rebound and biomechanical interactions. Racket properties influence the rebound of the ball. Ball rebound speed increases with frame stiffness and as string tension decreases. Reducing inter-string contacting forces increases rebound topspin. Historical trends and predictive modelling indicate swingweights of around 0.030–0.035 kg/m² are best for high ball speed and accuracy. To fully understand the effect of their design changes, engineers should use impact conditions in their experiments, or models, which reflect those of actual tennis strokes. Sports engineers, therefore, benefit from working closely with biomechanists to ensure realistic impact conditions.     

Synchronized lower limb kinematics with pelvis orientation achieves the non-rotational shot

A non-rotational (NR) shot is now a well-known scoring move in soccer. To execute the NR shot, it is necessary to deprive the ball of any rotational forces during the impact phase. To execute the NR shot, it is natural that the force vector acting from the foot would pass through the ball’s center of gravity; however, the coordinated motion of the lower limb joint’s angular displacement and the pelvis is still unclear. The aim of this study is to estimate the coordinated leg and pelvis motion during the NR shot as compared to that during instep kicking. Four right-leg dominant college league players were asked to perform a NR shot and an instep kick a total of 10 times each. Hip, knee, and ankle joint angular displacements in the sagittal plane and pelvis yaw and roll rotational motions during both types of kicks were calculated with 14 IR reflective markers using a 3D real-time motion analysis system with a 250-Hz sampling. The Euclidean distances of the joint space of the NR shot and the instep kick were also calculated to detect similarities in the coordinated motion of the lower limb. The results showed that the lower limb joint motions in the sagittal plane were not different; however, the pelvis roll and yaw motions were apparently different, and these phenomena could simulate a pendulum motion with changes in both the vertical and horizontal displacements. These results suggest that the coordinated motion of the lower limb joint’s angular displacement shows high similarity between the NR shot and the instep kick, and the pelvis roll and yaw synchronized orientation is essential for achieving the NR shot.     

Elite wheelchair rugby: a quantitative analysis of chair configuration in Australia

Limited recommendations of wheelchair configurations for court sports have been identified in the published literature. To accommodate the wide range of impairments in wheelchair rugby, players are given a point score that reflects their impairment. Players have regularly been grouped as high-, mid-, or low-point players in research, with high-point players having greater levels of muscle function compared with other classifications. This research documented the wheelchair configurations of elite Australian wheelchair rugby players across classification groups. Significant differences (p < 0.05) were found for increased seat height and decreased seat depth for high-point players compared with low- and mid-point groups, respectively. Low-point players displayed reduced wheelchair mass compared with high- and mid-point players, as well as increased frame length. Camber angles showed no significant differences across the classification groups. The incorporation of anthropometric measures, such as the elbow angle at the top dead center, was also investigated. While elbow angle showed no significant differences, seat height-to-total arm length ratio was higher for high-point players. Participants also completed surveys detailing their perception of the effect of altering wheelchair configurations. It is suggested that wheelchair configurations should consider an individual’s anthropometrics, impairment, training history, and court role to promote optimal performance, with predictive modeling having the potential to reduce the associated time and cost.     

Direct skeletal attachment prosthesis for the amputee athlete: the unknown potential

Lower limb amputees often experience complications with the use of conventional socket-type prostheses, which further reduce their already compromised ability to perform the activities of daily living, or to participate in sporting activities. During the last two decades, a new technology of direct skeletal attachment (osseointegration) of prosthesis to the femoral residuum has been developed. The aim of this research was to assess the implant design, surgery protocols, and functional testing of this new technology on the first 100 patients using the Integral Leg Prosthesis procedure. This new knowledge can guide future engineering developments of osseointegration within the sporting arena. Between 1999 and 2013, direct skeletal implantation was performed on 112 amputees, from two centres in Germany and Australia. From the experience of the surgical team, modifications were made to the implant design. This re-engineering of the implant has reduced the surgical revisions due to infection from 29 % with the early implant design down to 7 %. The functional testing of the 34 Australian cases were assessed pre- and 12 months post-implant with significant improvements of one complete K-scale; the Q-TFA measures increased (50.9–86.7), whilst the Timed Up and Go decreased significantly (12.43 s ± 3.89 to 8.03 s ± 2.80), and the 6 min walk increased (304.0–383.9 m). From these findings, osseointegration technology is realistically the way of the future for amputee athletes. Further refinement of the implant design and sports-specific functional testing are required to define the potential of this technology.