Effects of different percentages of body weight support on spatiotemporal step characteristics during running

This study aimed to determine the effect of different percentages of body weight support (BWS) on spatiotemporal step characteristics during running. 26 endurance runners (age: 37 ± 9 years) completed a running treadmill protocol consisting of 6 different conditions (BWS combinations: 0–50%), with velocity maintained at 12 km/h. Each condition lasted 1 minute. Step angle, ground contact time (CT), flight time (FT), step length (SL) and frequency (SF), and duration of phases during stance time (phase1: initial contact; phase2: midstance; phase3: propulsion) were measured for every step during the test using a photoelectric cell system. Compared with the baseline condition (100% BW), FT was longer, CT was shorter, SL was longer, SF was lower, and the step angle was higher with each increase in BWS (p < 0.05). Also, some changes were observed in the duration of phases during stance time: phase1 did not experience changes across experimental conditions (p = 0.096), phase2 decreased and phase3 increased as BW was supported (p < 0.05). These results indicate that as BW was supported, runners showed longer FT and SL, shorter CT, lower SF, and greater step angle as well as some changes in the phases during the ground contact. Therefore, this study highlights the effect of different percentages of BWS on spatiotemporal parameters.     

Determinants for the commitment relationship maintenance between the alumni and the alma mater

This study aims to find determinants for the commitment relationship between alumni and alma mater. Based on the literature, satisfaction and image are proposed as drivers of commitment. A survey applied to 2544 alumni in a Portuguese university provides data analyzed through a structural equation modeling technique. The results present ‘image of education’, ‘image of communication’ and ‘satisfaction with social and academic environment’ as determinants of the commitment relationship, which provide important clues for the marketers’ decision-making process when developing activities geared towards alumni. This process should emphasize aspects relating to their willingness to give back, academic and relationship quality, and institutional values. Within the Higher Education market, this study underscores the need to maintain and reinforce the relationship with alumni, and contributes to the scarce Portuguese literature on alumni matters.     

Association of physical fitness,body composition,cardiometabolic markers and adherence to the Mediterranean diet with bone mineral density in perimenopausal women. The FLAMENCO project

This study aimed to analyse the association of different components of physical fitness, body composition, cardiometabolic markers and the Mediterranean diet with bone mineral density (BMD) in perimenopausal women, and to test which of these components are independently associated with BMD. The sample comprised 197 perimenopausal women (52.6 ± 4.5 years). Physical fitness was assessed with the “Senior Fitness Test” battery and the handgrip strength and Bruce tests. Fat and lean mass and BMD were measured using dual-energy X-ray absorptiometry. We analysed the markers of metabolic syndrome, C-reactive protein, and components of the Mediterranean diet. Handgrip muscle strength (β = 0.212, P = 0.005), body weight (β = 0.244, P = 0.001), BMI (β = 0.180, P = 0.011) and lean mass (β = 0.379, P < 0.001) were positively associated with BMD. No associations were observed between cardiometabolic markers or the Mediterranean diet with BMD (all P > 0.05). When all relevant indicators of BMD were simultaneously considered, lean mass was the only 1 showing an independent association with BMD (β = 0.392, P < 0.001), explaining 14% of the BMD variability. In conclusion, muscle strength might be a marker of BMD in perimenopausal women. However, lean mass was the only factor independently associated with BMD. Future research to determine whether increasing lean mass through specific exercise-based interventions contributes to increasing BMD is warranted.     

Effect of hand paddles and parachute on backstroke coordination and stroke parameters

Hand paddles and parachutes have been used in order to overload swimmers, and consequently increase the propulsive force generation in swimming. However, their use may affect not only kinematical parameters (average speed, stroke length and stroke rate), but also time gaps between propulsive phases, assessed through the index of coordination (IdC). The objective of this study was to assess the effects of hand paddles and parachute use, isolated or combined, on kinematical parameters and coordination. Eleven swimmers (backstroke 50-m time: 29.16 ± 1.43 s) performed four 15-m trials in a randomised order at maximal intensity: (1) without implements (FREE), (2) with hand paddles (HPD), (3) with parachute (PCH) and (4) with hand paddles plus parachute (HPD+PCH). All trials were video-recorded (60 Hz) in order to assess average speed, stroke rate, stroke length, five stroke phases and index of coordination. When average swimming speed was compared to FREE, it was lower in PCH and HPD+PCH, and higher in HPD. Stroke rate decreased in all overloaded trials compared to FREE. The use of hand paddles and parachute increased and decreased stroke length, respectively. In addition, propulsive phase duration was increased when hand paddles were used, and time gaps shifted towards zero (no time gap), especially when hand paddles were combined with parachute. It is conceivable that the combined use of hand paddles and parachute, once allowing overloading both propulsive and resistive forces, provides a specific stimulus to improve muscle strength and propulsive continuity.     

Validity and reliability of a low-cost digital dynamometer for measuring isometric strength of lower limb

Lower limb isometric strength is a key parameter to monitor the training process or recognise muscle weakness and injury risk. However, valid and reliable methods to evaluate it often require high-cost tools. The aim of this study was to analyse the concurrent validity and reliability of a low-cost digital dynamometer for measuring isometric strength in lower limb. Eleven physically active and healthy participants performed maximal isometric strength for: flexion and extension of ankle, flexion and extension of knee, flexion, extension, adduction, abduction, internal and external rotation of hip. Data obtained by the digital dynamometer were compared with the isokinetic dynamometer to examine its concurrent validity. Data obtained by the digital dynamometer from 2 different evaluators and 2 different sessions were compared to examine its inter-rater and intra-rater reliability. Intra-class correlation (ICC) for validity was excellent in every movement (ICC > 0.9). Intra and inter-tester reliability was excellent for all the movements assessed (ICC > 0.75). The low-cost digital dynamometer demonstrated strong concurrent validity and excellent intra and inter-tester reliability for assessing isometric strength in the main lower limb movements.     

Laboratory predictors of uphill cycling performance in trained cyclists

ABSTRACT

This study aimed to assess the relationship between an uphill time-trial (TT) performance and both aerobic and anaerobic parameters obtained from laboratory tests. Fifteen cyclists performed a Wingate anaerobic test, a graded exercise test (GXT) and a field-based 20-min TT with 2.7% mean gradient. After a 5-week non-supervised training period, 10 of them performed a second TT for analysis of pacing reproducibility. Stepwise multiple regressions demonstrated that 91% of TT mean power output variation (W kg^?1) could be explained by peak oxygen uptake (ml kg^?1.min^?1) and the respiratory compensation point (W kg^?1), with standardised beta coefficients of 0.64 and 0.39, respectively. The agreement between mean power output and power at respiratory compensation point showed a bias ± random error of 16.2 ± 51.8 W or 5.7 ± 19.7%. One-way repeated-measures analysis of variance revealed a significant effect of the time interval (123.1 ± 8.7; 97.8 ± 1.2 and 94.0 ± 7.2% of mean power output, for epochs 0–2, 2–18 and 18–20 min, respectively; P < 0.001), characterising a positive pacing profile. This study indicates that an uphill, 20-min TT-type performance is correlated to aerobic physiological GXT variables and that cyclists adopt reproducible pacing strategies when they are tested 5 weeks apart (coefficients of variation of 6.3; 1 and 4%, for 0–2, 2–18 and 18–20 min, respectively).     

How players exploit variability and regularity of game actions in female volleyball teams

Variability analysis has been used to understand how competitive constraints shape different behaviours in team sports. In this study, we analysed and compared variability of tactical performance indices in players within complex I at two different competitive levels in volleyball. We also examined whether variability was influenced by set type and period. Eight matches from the 2012 Olympics competition and from the Portuguese national league in the 2014–2015 season were analysed (1496 rallies). Variability of setting conditions, attack zone, attack tempo and block opposition was assessed using Shannon entropy measures. Magnitude-based inferences were used to analyse the practical significance of compared values of selected variables. Results showed differences between elite and national teams for all variables, which were co-adapted to the competitive constraints of set type and set periods. Elite teams exploited system stability in setting conditions and block opposition, but greater unpredictability in zone and tempo of attack. These findings suggest that uncertainty in attacking actions was a key factor that could only be achieved with greater performance stability in other game actions. Data suggested how coaches could help setters develop the capacity to play at faster tempos, diversifying attack zones, especially at critical moments in competition.     

Performance evaluation of the high sensitive troponin I assay on the Atellica IM analyser

IntroductionThe Fourth Universal Definition of Myocardial Infarction Global Taskforce recommends the use of high sensitive troponin (hs-Tn) assays in the diagnosis of acute myocardial infarction. We evaluated the analytical performance of the Atellica IM High-sensitivity Troponin I Assay (hs-TnI) (Siemens Healthcare Diagnostics Inc., Tarrytown, USA) and compared its performance to other hs-TnI assays (Siemens Advia Centaur, Dimension Vista, Dimension EXL, and Abbott Architect (Wiesbaden, Germany)) at one or more sites across Europe.Materials and methodsPrecision, detection limit, linearity, method comparison, and interference studies were performed according to Clinical and Laboratory Standards Institute protocols. Values in 40 healthy individuals were compared to the manufacturer’s cut-offs. Sample turnaround time (TAT) was examined.ResultsImprecision repeatability CVs were 1.1–4.7% and within-lab imprecision were 1.8–7.6% (10.0–25,000 ng/L). The limit of blank (LoB), detection (LoD), and quantitation (LoQ) aligned with the manufacturer’s values of 0.5 ng/L, 1.6 ng/L, and 2.5 ng/L, respectively. Passing-Bablok regression demonstrated good correlations between Atellica IM analyser with other systems; some minor deviations were observed. All results in healthy volunteers fell below the 99th percentile URL, and greater than 50% of each sex demonstrated values above the LoD. No interference was observed for biotin (≤ 1500 µg/L), but a slight bias at 5.0 g/L haemoglobin and 50 ng/L Tn was observed. TAT from was fast (mean time = 10.9 minutes) and reproducible (6%CV).ConclusionsReal-world analytical and TAT performance of the hs-TnI assay on the Atellica IM analyser make this assay fit for routine use in clinical laboratories.