A study of airfoil parameterization,modeling, and optimization based on the computational fluid dynamics method

An excellent airfoil with a high lift-to-drag ratio may decrease oil consumption and enhance the voyage. Based on NACA 0012, an improved airfoil is explored in this paper. The class/shape function transformation has been proved to be a good method for airfoil parameterization, and in this paper it is modified to improve imitation accuracy. The computational fluid dynamics method is applied to obtain numerically the aerodynamic parameters of the parameterized airfoil, and the result is proved credible by comparison with available experimental data in the open literature. A polynomial-based response surface model and the uniform Latin hypercube sampling method are employed to decrease computational cost. Finally, the nonlinear programming by quadratic Lagrangian method is utilized to modify the multi-island genetic algorithm, which has an improved optimization effect than the method used on its own. The obtained result shows that the modified class/shape function transformation method produces a better imitation of an airfoil in the nose and tail regions than the original method, and that it will satisfy the tolerance zone of the model in a wind tunnel. The response surface model based on the uniform Latin hypercube sampling method gives an accurate prediction of the lift-to-drag ratio with changes in the design variables. The numerical result of the flow around the airfoil shows reasonable agreement with the experimental data graphically and quantitatively. Ultimately, an airfoil with better capacity than the original one is acquired using the multi-island genetic algorithm based nonlinear programming by quadratic Lagrangian optimization method. The pressure contours and lift-to-drag ratio along with the attack angle have been compared with those of the original airfoil, and the results demonstrate the strength of the optimized airfoil. The process for exploring an improved airfoil through parameterization to optimization is worth referencing in future work.     

Chinese middle school teachers’ preferences regarding performance evaluation measures

Teacher performance evaluation currently is receiving unprecedented attention from policy makers, scholars, and practitioners worldwide. This study is one of the few studies of teacher perceptions regarding teacher performance measures that focus on China. We employed a quantitative dominant mixed research design to investigate Chinese teachers’ preferences for teacher performance measures and the possible reasons for their preferences. Considering the quantitative results, the surveyed Chinese teachers identified fulfillment of additional roles, collaboration with faculty and staff, and students’ test scores as the most important measures for performance evaluation. Qualitatively, the most important measures that the surveyed teachers reported were the teacher’s morality, workload, and students’ test scores.     

Positional group significantly influences the offensive and defensive skill involvements of junior representative rugby league players during match play

This study examined the skill involvements of three positional groups across a junior representative rugby league season. Data were collected from 45 rugby league players (mean ± SD; age = 16.5 ± 1.0 years) currently participating in the Harold Matthews and SG Ball Cup. Players were subdivided into hit-up forwards, adjustables and outside backs. The frequency (n · min^?1) of offensive, defensive and overall involvements was coded for each group using a notation system and a practical coach skill analysis tool. Multivariate analysis of variance (MANOVA) revealed a significant effect of playing position on skill involvements (F = 9.06; P < 0.001; ES = 0.41). Hit-up forwards performed a significantly greater frequency of offensive (0.31 ± 0.10), defensive (0.42 ± 0.15) and overall involvements (0.74 ± 0.19) when compared to adjustables (0.20 ± 0.08, 0.28 ± 0.08 and 0.52 ± 0.15, respectively) and outside backs (0.20 ± 0.12, 0.11 ± 0.07 and ± 0.31 ± 0.17, respectively). Further, adjustables performed a significantly greater number of defensive (0.28 ± 0.08) and overall involvements (0.52 ± 0.15) when compared to outside backs (0.11 ± 0.07 and 0.31 ± 0.17, respectively). The findings of this study suggest that it is important to consider a junior player’s positional group when analysing their skill involvements. Information gained from this study could assist in the design of specific training methodologies for junior rugby league players in high-level talent development programmes.     

Bedingungen der Bindungswirkung inkrementeller Normen in Fußballvereinen

Sports clubs depend on the pooling of resources by their members. The supportive distribution of the resources within a club is facilitated in particular by the effectiveness of incremental standards. A basic prerequisite for a fair distribution of resources is a minimum of community spirit among the members. Based on a nationwide survey of football clubs and an ordinal logistic regression model, factors were determined that reflect the extent of the community spirit within a club. The opening up of the club by payment to players and perceived problems with acquiring and binding of volunteers are associated with a reduction of community spirit. In contrast, the perception that the club activities can be continued in the long term shows a positive correlation to a highly developed community spirit.     

A channel distortion model for video over lossy packet networks

Error-resilient video communication over lossy packet networks is often designed and operated based on models for the effect of losses on the reconstructed video quality. This paper analyzes the channel distortion for video over lossy packet networks and proposes a new model that, compared to previous models, more accurately estimates the expected mean-squared error distortion for different packet loss patterns by accounting for inter-frame error propagation and the correlation between error frames. The accuracy of the proposed model is validated with JVT/H.264 encoded standard test sequences and previous frame concealment, where the proposed model provides an obvious accuracy gain over previous models.     

Validity of Self-Reported Pedometer Steps per Day in College Students

The purpose of this article was to examine the validity of self-reported pedometer steps/day. Forty-seven participants were provided a New Lifestyles NL-2000 (NL-2000; Lees Summit, MO, USA) pedometer and a physical activity (PA) diary for 3 weeks, but not informed of the data-storing capabilities. For weeks 2 and 3, each participant was given a step goal of 3,000 steps/day above week 1 average. A 2 × 3 repeated measures analysis of variance (ANOVA) was used to examine differences between reported steps/day. Bland–Altman plots assessed the mean bias and limits of agreement between reporting methods. Mean self-reported and NL-2000 steps/day were 9,264 ± 3,555 and 8,971 ± 3,590 steps/day (n = 26, p > .05). Mean biases were 216 ± 1,753 (week 1), –506 ± 1,355 (week 2), and –590 ± 1,360 (week 3) steps/day. Negative mean bias values indicate higher self-reported steps/day. Mean steps/day were similar between recording methods, but large differences were observed among individuals, suggesting self-reported steps/day may be valid for PA research at the population level, but not the individual level.     

An Examination and Validation of an Adapted Youth Experience Scale for University Sport

Limited tools assess positive development through university sport. Such a tool was validated in this investigation using two independent samples of Canadian university athletes. In Study 1, 605 athletes completed 99 survey items drawn from the Youth Experience Scale (YES 2.0), and separate a priori measurement models were evaluated (i.e., 99 items, YES 2.0, YES for Sport [YES-S]). Confirmatory factor analysis (CFA) and exploratory structural equation modeling (ESEM) results indicated issues with model fit. Post-hoc modifications improved fit, resulting in a 46-item, 9-factor model with five positive and four negative dimensions. In Study 2, 511 athletes completed the same items. The resultant model was confirmed using both CFA (comparative fit index [CFI] = .911, standardized root mean square residual [SRMR] = .056, root mean square error of approximation [RMSEA] = .040) and ESEM (CFI = .956, SRMR = .023, RMSEA = .034). The resultant University Sport Experience Survey provides a reliable and factorially valid instrument for measuring development in university sport.     

A review of tennis racket performance parameters

The application of advanced engineering to tennis racket design has influenced the nature of the sport. As a result, the International Tennis Federation has established rules to limit performance, with the aim of protecting the nature of the game. This paper illustrates how changes to the racket affect the player-racket system. The review integrates engineering and biomechanical issues related to tennis racket performance, covering the biomechanical characteristics of tennis strokes, tennis racket performance, the effect of racket parameters on ball rebound and biomechanical interactions. Racket properties influence the rebound of the ball. Ball rebound speed increases with frame stiffness and as string tension decreases. Reducing inter-string contacting forces increases rebound topspin. Historical trends and predictive modelling indicate swingweights of around 0.030–0.035 kg/m² are best for high ball speed and accuracy. To fully understand the effect of their design changes, engineers should use impact conditions in their experiments, or models, which reflect those of actual tennis strokes. Sports engineers, therefore, benefit from working closely with biomechanists to ensure realistic impact conditions.     

Synchronized lower limb kinematics with pelvis orientation achieves the non-rotational shot

A non-rotational (NR) shot is now a well-known scoring move in soccer. To execute the NR shot, it is necessary to deprive the ball of any rotational forces during the impact phase. To execute the NR shot, it is natural that the force vector acting from the foot would pass through the ball’s center of gravity; however, the coordinated motion of the lower limb joint’s angular displacement and the pelvis is still unclear. The aim of this study is to estimate the coordinated leg and pelvis motion during the NR shot as compared to that during instep kicking. Four right-leg dominant college league players were asked to perform a NR shot and an instep kick a total of 10 times each. Hip, knee, and ankle joint angular displacements in the sagittal plane and pelvis yaw and roll rotational motions during both types of kicks were calculated with 14 IR reflective markers using a 3D real-time motion analysis system with a 250-Hz sampling. The Euclidean distances of the joint space of the NR shot and the instep kick were also calculated to detect similarities in the coordinated motion of the lower limb. The results showed that the lower limb joint motions in the sagittal plane were not different; however, the pelvis roll and yaw motions were apparently different, and these phenomena could simulate a pendulum motion with changes in both the vertical and horizontal displacements. These results suggest that the coordinated motion of the lower limb joint’s angular displacement shows high similarity between the NR shot and the instep kick, and the pelvis roll and yaw synchronized orientation is essential for achieving the NR shot.     

Elite wheelchair rugby: a quantitative analysis of chair configuration in Australia

Limited recommendations of wheelchair configurations for court sports have been identified in the published literature. To accommodate the wide range of impairments in wheelchair rugby, players are given a point score that reflects their impairment. Players have regularly been grouped as high-, mid-, or low-point players in research, with high-point players having greater levels of muscle function compared with other classifications. This research documented the wheelchair configurations of elite Australian wheelchair rugby players across classification groups. Significant differences (p < 0.05) were found for increased seat height and decreased seat depth for high-point players compared with low- and mid-point groups, respectively. Low-point players displayed reduced wheelchair mass compared with high- and mid-point players, as well as increased frame length. Camber angles showed no significant differences across the classification groups. The incorporation of anthropometric measures, such as the elbow angle at the top dead center, was also investigated. While elbow angle showed no significant differences, seat height-to-total arm length ratio was higher for high-point players. Participants also completed surveys detailing their perception of the effect of altering wheelchair configurations. It is suggested that wheelchair configurations should consider an individual’s anthropometrics, impairment, training history, and court role to promote optimal performance, with predictive modeling having the potential to reduce the associated time and cost.