A study of airfoil parameterization,modeling, and optimization based on the computational fluid dynamics method

An excellent airfoil with a high lift-to-drag ratio may decrease oil consumption and enhance the voyage. Based on NACA 0012, an improved airfoil is explored in this paper. The class/shape function transformation has been proved to be a good method for airfoil parameterization, and in this paper it is modified to improve imitation accuracy. The computational fluid dynamics method is applied to obtain numerically the aerodynamic parameters of the parameterized airfoil, and the result is proved credible by comparison with available experimental data in the open literature. A polynomial-based response surface model and the uniform Latin hypercube sampling method are employed to decrease computational cost. Finally, the nonlinear programming by quadratic Lagrangian method is utilized to modify the multi-island genetic algorithm, which has an improved optimization effect than the method used on its own. The obtained result shows that the modified class/shape function transformation method produces a better imitation of an airfoil in the nose and tail regions than the original method, and that it will satisfy the tolerance zone of the model in a wind tunnel. The response surface model based on the uniform Latin hypercube sampling method gives an accurate prediction of the lift-to-drag ratio with changes in the design variables. The numerical result of the flow around the airfoil shows reasonable agreement with the experimental data graphically and quantitatively. Ultimately, an airfoil with better capacity than the original one is acquired using the multi-island genetic algorithm based nonlinear programming by quadratic Lagrangian optimization method. The pressure contours and lift-to-drag ratio along with the attack angle have been compared with those of the original airfoil, and the results demonstrate the strength of the optimized airfoil. The process for exploring an improved airfoil through parameterization to optimization is worth referencing in future work.     

Chinese middle school teachers’ preferences regarding performance evaluation measures

Teacher performance evaluation currently is receiving unprecedented attention from policy makers, scholars, and practitioners worldwide. This study is one of the few studies of teacher perceptions regarding teacher performance measures that focus on China. We employed a quantitative dominant mixed research design to investigate Chinese teachers’ preferences for teacher performance measures and the possible reasons for their preferences. Considering the quantitative results, the surveyed Chinese teachers identified fulfillment of additional roles, collaboration with faculty and staff, and students’ test scores as the most important measures for performance evaluation. Qualitatively, the most important measures that the surveyed teachers reported were the teacher’s morality, workload, and students’ test scores.     

Mediating effects of resistance training skill competency on health-related fitness and physical activity: the ATLAS cluster randomised controlled trial

The purpose of this study was to examine the mediating effect of resistance training skill competency on percentage of body fat, muscular fitness and physical activity among a sample of adolescent boys participating in a school-based obesity prevention intervention. Participants were 361 adolescent boys taking part in the Active Teen Leaders Avoiding Screen-time (ATLAS) cluster randomised controlled trial: a school-based program targeting the health behaviours of economically disadvantaged adolescent males considered “at-risk” of obesity. Body fat percentage (bioelectrical impedance), muscular fitness (hand grip dynamometry and push-ups), physical activity (accelerometry) and resistance training skill competency were assessed at baseline and post-intervention (i.e., 8 months). Three separate multi-level mediation models were analysed to investigate the potential mediating effects of resistance training skill competency on each of the study outcomes using a product-of-coefficients test. Analyses followed the intention-to-treat principle. The intervention had a significant impact on the resistance training skill competency of the boys, and improvements in skill competency significantly mediated the effect of the intervention on percentage of body fat and the combined muscular fitness score. No significant mediated effects were found for physical activity. Improving resistance training skill competency may be an effective strategy for achieving improvements in body composition and muscular fitness in adolescent boys.     

Motorische Leistungsfähigkeit von Kindern und Jugendlichen in Deutschland

Motor performance is an important health resource. Review articles revealed a decline of motor performance of approximately 10?% between 1975 and 2006. In the past most of the data available for such comparisons came from ad hoc studies with non-standardized methods. Within the framework of the ”Motorik-Modul“ (MoMo) study as part of the German Health Interview and Examination Survey for Children and Adolescents (KiGGS), it is possible for the first time to directly compare two cohorts in the ages of 4–17 years in a nationally representative database for Germany. The aim of this article is to report changes in motor performance of children and adolescents in the time period 2003–2006 (cohort baseline n = 4528) compared to 2009–2012 (cohort wave 1, n = 2820). Overall, it is clearly shown that the motor performance of children and adolescents in Germany did not decrease within the observational period of 6 years. The comparison of mean values of the baseline cohort compared to those of wave 1 showed that 28 out of 52 mean values of the two cohorts with a high probability did not differ based on 95?% confidence intervals (CI). In 24 out of the 52 mean values positive changes could be noted based on the individual 95?% CI values. There were more positive changes in primary school aged children than in other age groups. Within these positive changes, most effect sizes were small to medium. The results indicate that recent activities aiming at elevating motor performance levels may have started to make an impact and should be expanded, also in secondary schools. The comparative cohort study presented in this article is currently being checked by the ongoing MoMo wave 2 survey of 2014–2017.     

Bedingungen der Bindungswirkung inkrementeller Normen in Fußballvereinen

Sports clubs depend on the pooling of resources by their members. The supportive distribution of the resources within a club is facilitated in particular by the effectiveness of incremental standards. A basic prerequisite for a fair distribution of resources is a minimum of community spirit among the members. Based on a nationwide survey of football clubs and an ordinal logistic regression model, factors were determined that reflect the extent of the community spirit within a club. The opening up of the club by payment to players and perceived problems with acquiring and binding of volunteers are associated with a reduction of community spirit. In contrast, the perception that the club activities can be continued in the long term shows a positive correlation to a highly developed community spirit.     

I’m New…Again: Reconceptualizing the Socialization Process Through Rotational Programs

Communication scholars have studied how organizations socialize new employees in breadth, but we know less about how employees adapt to multiple roles rather than just one position. With the rise of rotational programs, which introduce newcomers to several different jobs within a brief time, socialization theory should be expanded. This study focused on people’s experiences in rotational programs to provide a more accurate picture of this complex socialization process. Longitudinal, qualitative data from employees during their first and second job rotation revealed that such employees’ socialization differs from traditional employees’ experiences. The results suggested a Model of Rotational Socialization that more accurately portrays the socialization process by accounting for the contrast between role and organizational socialization.     

A channel distortion model for video over lossy packet networks

Error-resilient video communication over lossy packet networks is often designed and operated based on models for the effect of losses on the reconstructed video quality. This paper analyzes the channel distortion for video over lossy packet networks and proposes a new model that, compared to previous models, more accurately estimates the expected mean-squared error distortion for different packet loss patterns by accounting for inter-frame error propagation and the correlation between error frames. The accuracy of the proposed model is validated with JVT/H.264 encoded standard test sequences and previous frame concealment, where the proposed model provides an obvious accuracy gain over previous models.     

A review of tennis racket performance parameters

The application of advanced engineering to tennis racket design has influenced the nature of the sport. As a result, the International Tennis Federation has established rules to limit performance, with the aim of protecting the nature of the game. This paper illustrates how changes to the racket affect the player-racket system. The review integrates engineering and biomechanical issues related to tennis racket performance, covering the biomechanical characteristics of tennis strokes, tennis racket performance, the effect of racket parameters on ball rebound and biomechanical interactions. Racket properties influence the rebound of the ball. Ball rebound speed increases with frame stiffness and as string tension decreases. Reducing inter-string contacting forces increases rebound topspin. Historical trends and predictive modelling indicate swingweights of around 0.030–0.035 kg/m² are best for high ball speed and accuracy. To fully understand the effect of their design changes, engineers should use impact conditions in their experiments, or models, which reflect those of actual tennis strokes. Sports engineers, therefore, benefit from working closely with biomechanists to ensure realistic impact conditions.     

Synchronized lower limb kinematics with pelvis orientation achieves the non-rotational shot

A non-rotational (NR) shot is now a well-known scoring move in soccer. To execute the NR shot, it is necessary to deprive the ball of any rotational forces during the impact phase. To execute the NR shot, it is natural that the force vector acting from the foot would pass through the ball’s center of gravity; however, the coordinated motion of the lower limb joint’s angular displacement and the pelvis is still unclear. The aim of this study is to estimate the coordinated leg and pelvis motion during the NR shot as compared to that during instep kicking. Four right-leg dominant college league players were asked to perform a NR shot and an instep kick a total of 10 times each. Hip, knee, and ankle joint angular displacements in the sagittal plane and pelvis yaw and roll rotational motions during both types of kicks were calculated with 14 IR reflective markers using a 3D real-time motion analysis system with a 250-Hz sampling. The Euclidean distances of the joint space of the NR shot and the instep kick were also calculated to detect similarities in the coordinated motion of the lower limb. The results showed that the lower limb joint motions in the sagittal plane were not different; however, the pelvis roll and yaw motions were apparently different, and these phenomena could simulate a pendulum motion with changes in both the vertical and horizontal displacements. These results suggest that the coordinated motion of the lower limb joint’s angular displacement shows high similarity between the NR shot and the instep kick, and the pelvis roll and yaw synchronized orientation is essential for achieving the NR shot.