Effects of added elastic tubes on open-chain knee extensor strength training

Attaching elastic tubes (ETs) to resistance training machines can affect the exercise load profile. The purpose of this study was to assess the training effects of added ETs, which were strategically attached to provide additional loads only during the deceleration phase of the knee extension exercise. Twenty-two healthy participants, assigned to either an experimental group (with ETs) or a control group (without ETs), participated in a 12-week strength-training program using a knee extension exercise machine. The acceleration effects were quantified and a method of attaching the ETs to the knee extension machine was developed. The effects of the added ETs were analysed by testing dynamic and isometric maximum contractions at four knee flexion angles (10°, 30°, 50°, and 80°). Analyses of covariance with the initial values as the covariate were used to examine the ET effects. A greater increase in isometric maximum strength was found in the experimental group than in the control group at knee flexion angles of 10° [effect size (ES) = 2.25] and 30° (ES = 1.18). No significant difference in the dynamic maximum strength was found between the groups. The use of ETs increased strength at smaller knee flexion angles with quadriceps that were relatively short.     

3D preserving xviii century barroque masterpiece: Challenges and results on the digital preservation of Aleijadinho's sculpture of the Prophet Joel

We present our recent efforts in the digital preservation of a set of baroque sculptures made by Antônio Francisco Lisboa, known as O. Aleijadinho, which is an important American baroque artist. The set was made in the beginning of the xix century and is composed of 12 near real sized sculptures, hand-carved in soapstone. These sculptures represent 12 of the 16 prophets from the Holy Bible and are part of a UNESCO World Heritage Site. Our group has been collaborating with UNESCO in a project that aims to preserve all these statues. We hereby present our initial efforts, consisting of the 3D digital preservation of the Prophet Joel sculpture. We developed a complete 3D digital preservation pipeline composed of four main stages: data acquisition, 3D reconstruction, texture generation and 3D model visualization. By evaluating our results in this first sculpture, we discuss the improvements we conceived before applying our pipeline in the remaining ones. Finally, we present the 3D model of the Prophet which registers the sculpture's current state and will be used in restoration, research and educational activities. We believe this contribution may be useful to guide further research on similar scenarios, showing how to avoid some practical mistakes and achieve good results.     

Effects of replica running shoes upon external forces and muscle activity during running

Twelve participants ran (9 km · h(-1)) to test two types of running shoes: replica and original shoes. Ground reaction force, plantar pressure and electromyographic activity were recorded. The shoes were tested randomly and on different days. Comparisons between the two experimental conditions were made by analysis of variance (ANOVA) test (P ≤ 0.05). The time to first peak, loading rate of the first peak and impulse of the first 75 ms of stance were significantly different between the shoes (P ≤ 0.05), revealing an increase of impact forces for the replica shoes. The peak plantar pressure values were significantly higher (P ≤ 0.05) when wearing replica shoes. During running, the contact area was significantly smaller (P ≤ 0.05) for the replica shoe. The electromyographic activity of the analysed muscles did not show changes between the two shoes in running. These findings suggest that the use of replica running shoes can increase the external load applied to the human body, but may not change the muscle activity pattern during locomotion. This new mechanical situation may increase the risk of injuries in these movements.     

Validity and reliability of a new field test (Carminatti's test) for soccer players compared with laboratory-based measures

The aim of this study was to assess the validity (Study 1) and reliability (Study 2) of a novel intermittent running test (Carminatti's test) for physiological assessment of soccer players. In Study 1, 28 players performed Carminatti's test, a repeated sprint ability test, and an intermittent treadmill test. In Study 2, 24 players performed Carminatti's test twice within 72 h to determine test-retest reliability. Carminatti's test required the participants to complete repeated bouts of 5 × 12 s shuttle running at progressively faster speeds until volitional exhaustion. The 12 s bouts were separated by 6 s recovery periods, making each stage 90 s in duration. The initial running distance was set at 15 m and was increased by 1 m at each stage (90 s). The repeated sprint ability test required the participants to perform 7 × 34.2 m maximal effort sprints separated by 25 s recovery. During the intermittent treadmill test, the initial velocity of 9.0 km · h(-1) was increased by 1.2 km · h(-1) every 3 min until volitional exhaustion. No significant difference (P > 0.05) was observed between Carminatti's test peak running velocity and speed at VO(2max) (v-VO(2max)). Peak running velocity in Carminatti's test was strongly correlated with v-VO(2max) (r = 0.74, P < 0.01), and highly associated with velocity at the onset of blood lactate accumulation (r = 0.63, P < 0.01). Mean sprint time was strongly associated with peak running velocity in Carminatti's test (r = -0.71, P < 0.01). The intraclass correlation was 0.94 with a coefficient of variation of 1.4%. In conclusion, Carminatti's test appears to be avalid and reliable measure of physical fitness and of the ability to perform intermittent high-intensity exercise in soccer players.     

Physical activity and school recess time: differences between the sexes and the relationship between children's playground physical activity and habitual physical activity

The aims of this study were: (1) to observe participation in moderate-to-vigorous physical activity (MVPA) during school recess periods; (2) to determine the relative importance of physical activity during recesses to overall daily physical activity; and (3) to examine differences in physical activity between the sexes during unstructured recess periods. The participants were 22 school children (10 boys, 12 girls) aged 8 - 10 years (mean = 8.9, s = 0.7) in the third and fourth grades. Daily totals for the physical activity variables were calculated by summing the values for each hour of 14 h of physical activity measurements (08:00 to 22:00 h). Recess times (minutes) were as follows: morning 10:30 to 11:00 h and afternoon 15:30 to 16:00 h. We did not differences between boys and girls in daily total accelerometer counts or the overall time spent in MVPA. However, girls were significantly (P < 0.05) more involved (38%) in MVPA during recess time than boys (31%). Participation in MVPA during recess contributes significantly more (P < 0.05) for girls (19%) than boys (15%) to the total amount of physical activity suggested by international health-related physical activity guidelines, while the percentage of time engaged in MVPA during recess time at school accounts for a small amount of the daily MVPA (6% for boys and 8% for girls). The results of this study suggest that school recess time is an important setting to promote MVPA and contributes to daily physical activity in young children, especially in girls.     

Survey on reporting of epithelial cells in urine sediment as part of external quality assessment programs in Brazilian laboratories

IntroductionEpithelial cells (ECs) are structures regularly observed during urine microscopy analysis. The correct identification of EC subtypes can be useful since renal tubular epithelial cells (RTECs) are clinically relevant. We investigate the urinary ECs report and the judgement of its clinical importance by Brazilian laboratories.Materials and methodsA survey with four questions was made available to participants of the Urinalysis External Quality Assessment Program (EQAP) from Controllab. Laboratories composed 3 groups: (1) differentiating ECs subtypes: “squamous”, “transitional” and “RTECs”; (2) differentiating ECs subtypes: “squamous” or “non-squamous” cells; (3) without ECs subtype identification. Participants did not necessarily answer to all questions and the answers were evaluated both within the same laboratory’s category and within different categories of laboratories.ResultsA total of 1336 (94%) laboratories answered the survey; Group 1, 119/140 (85%) reported that ECs differentiation is important to the physician and 62% want to be evaluated by EQAP, while in Group 3, 455/1110 (41%) reported it is useful to them, however only 25% want be evaluated by EQAP. Group 2 laboratories 37/51 (73%) reported that the information is important, but only 13/52 (25%) are interested in an EQAP with differentiation of the 3 ECs subtypes.ConclusionMost of the laboratories do not differentiate ECs in the three subtypes, despite the clinical importance of RTECs. Education of laboratory staff about the clinical significance of urinary particles should be considered a key priority.     

A Meta-analysis of the Impact of Social and Emotional Learning Interventions on Teachers’ Burnout Symptoms

Educational Psychology Review - Over the last decades, extensive research has given considerable attention to teachers’ burnout. Owing to its negative personal, organizational, and social...     

Optimal tensegrity structures in bending: The discrete Michell truss

This paper provides the closed form analytical solution to the problem of minimizing the material volume required to support a given set of bending loads with a given number of discrete structural members, subject to material yield constraints. The solution is expressed in terms of two variables, the aspect ratio, ρ^-1, and complexity of the structure, q (the total number of members of the structure is equal to q(q+1)). The minimal material volume (normalized) is also given in closed form by a simple function of ρ and q, namely, V=q(ρ^-1/q-ρ^1/q). The forces for this nonlinear problem are shown to satisfy a linear recursive equation, from node-to-node of the structure. All member lengths are specified by a linear recursive equation, dependent only on the initial conditions involving a user specified length of the structure. The final optimal design is a class 2 tensegrity structure. Our results generate the 1904 results of Michell in the special case when the selected complexity q approaches infinity. Providing the optimum in terms of a given complexity has the obvious advantage of relating complexity q to other criteria, such as costs, fabrication issues, and control. If the structure is manufactured with perfect joints (no glue, welding material, etc.), the minimal mass complexity is infinite. But in the presence of any joint mass, the optimal structural complexity is finite, and indeed quite small. Hence, only simple structures (low complexity q) are needed for practical design.