Development of a grinding-specific performance test set-up

Abstract

The aim of this study was to develop a performance test set-up for America's Cup grinders. The test set-up had to mimic the on-boat grinding activity and be capable of collecting data for analysis and evaluation of grinding performance. This study included a literature-based analysis of grinding demands and a test protocol developed to accommodate the necessary physiological loads. This study resulted in a test protocol consisting of 10 intervals of 20 revolutions each interspersed with active resting periods of 50 s. The 20 revolutions are a combination of both forward and backward grinding and an exponentially rising resistance. A custom-made grinding ergometer was developed with computer-controlled resistance and capable of collecting data during the test. The data collected can be used to find measures of grinding performance such as peak power, time to complete and the decline in repeated grinding performance.     

Considerations for protein intake in managing weight loss in athletes

Abstract

A large body of evidence now shows that higher protein intakes (2–3 times the protein Recommended Dietary Allowance (RDA) of 0.8 g/kg/d) during periods of energy restriction can enhance fat-free mass (FFM) preservation, particularly when combined with exercise. The mechanisms underpinning the FFM-sparing effect of higher protein diets remain to be fully elucidated but may relate to the maintenance of the anabolic sensitivity of skeletal muscle to protein ingestion. From a practical point of view, athletes aiming to reduce fat mass and preserve FFM should be advised to consume protein intakes in the range of ～1.8–2.7 g kg^?1 d^?1 (or ～2.3–3.1 g kg^?1 FFM) in combination with a moderate energy deficit (?500 kcal) and the performance of some form of resistance exercise. The target level of protein intake within this recommended range requires consideration of a number of case-specific factors including the athlete's body composition, habitual protein intake and broader nutrition goals. Athletes should focus on consuming high-quality protein sources, aiming to consume protein feedings evenly spaced throughout the day. Post-exercise consumption of 0.25–0.3 g protein meal^?1 from protein sources with high leucine content and rapid digestion kinetics (i.e. whey protein) is recommended to optimise exercise-induced muscle protein synthesis. When protein is consumed as part of a mixed macronutrient meal and/or before bed slightly higher protein doses may be optimal.     

Writing and pseudo‐writing from Internet‐based sources: implications for learning and assessment

In recent years, plagiarism has been on the increase across the Western world. This article identifies Internet access as a contributory cause of this trend and addresses the implications of readily available Internet sources for the teaching and assessment of writing in schools. The basis for the article is a previous study showing a wide incidence of plagiarism in the Internet‐based writing of students in three classes at upper secondary school level in Norway. I relate the students' choices to writing as a cognitive process and as a cultural practice. My basic assumption is that the students' writing is work. It is this work we have in mind when we relate writing to learning and when we assess students' skills on the basis of their written texts. Access to the Internet changes the premises for this work because writing can be replaced by ‘pseudo‐writing’. ‘Pseudo‐writing’ is a work reducing writing practice, which neither excludes nor coincides with what we traditionally associate with plagiarism in schools. The main point in this article is that when students have access to the Internet during essay writing, the result is unavoidably a product of both writing and pseudo‐writing. Internet access thus leads to greater uncertainty about the role writing plays in student learning and makes it more difficult to take written assignments into account in assessing students' school results and effort.     

Microfluidic chemical processing with on-chip washing by deterministic lateral displacement arrays with separator walls

We describe a microfluidic device for on-chip chemical processing, such as staining, and subsequent washing of cells. The paper introduces “separator walls” to increase the on-chip incubation time and to improve the quality of washing. Cells of interest are concentrated into a treatment stream of chemical reagents at the first separator wall for extended on-chip incubation without causing excess contamination at the output due to diffusion of the unreacted treatment chemicals, and then are directed to the washing stream before final collections. The second separator wall further reduces the output contamination from diffusion to the washing stream. With this approach, we demonstrate on-chip leukocyte staining with Rhodamine 6G and washing. The results suggest that other conventional biological and analytical processes could be replaced by the proposed device.     

Disrupting the wall accumulation of human sperm cells by artificial corrugation

Many self-propelled microorganisms are attracted to surfaces. This makes their dynamics in restricted geometries very different from that observed in the bulk. Swimming along walls is beneficial for directing and sorting cells, but may be detrimental if homogeneous populations are desired, such as in counting microchambers. In this work, we characterize the motion of human sperm cells ∼60 μm long, strongly confined to ∼25 μm shallow chambers. We investigate the nature of the cell trajectories between the confining surfaces and their accumulation near the borders. Observed cell trajectories are composed of a succession of quasi-circular and quasi-linear segments. This suggests that the cells follow a path of intermittent trappings near the top and bottom surfaces separated by stretches of quasi-free motion in between the two surfaces, as confirmed by depth resolved confocal microscopy studies. We show that the introduction of artificial petal-shaped corrugation in the lateral boundaries removes the tendency of cells to accumulate near the borders, an effect which we hypothesize may be valuable for microfluidic applications in biomedicine.     

Isolation and enrichment of low abundant particles with insulator-based dielectrophoresis

Isolation and enrichment of low-abundant particles are essential steps in many bio-analytical and clinical applications. In this work, the capability of an insulator-based dielectrophoresis (iDEP) device for the detection and stable capture of low abundant polystyrene particles and yeast cells was evaluated. Binary and tertiary mixtures of particles and cells were tested, where the low-abundant particles had concentration ratios on the order of 1:10 000 000 compared to the other particles present in the mixture. The results demonstrated successful and stable capture and enrichment of rare particles and cells (trapping efficiencies over 99%), where particles remained trapped in a stable manner for up to 4 min. A device with four reservoirs was employed for the separation and enrichment of rare particles, where the particles of interest were first selectively concentrated and then effectively directed to a side port for future collection and analysis. The present study demonstrates that simple iDEP devices have appropriate screening capacity and can be used for handling samples containing rare particles; achieving both enrichment and isolation of low-abundant particles and cells.     

Robust fluidic connections to freestanding microfluidic hydrogels

Biomimetic scaffolds approaching physiological scale, whose size and large cellular load far exceed the limits of diffusion, require incorporation of a fluidic means to achieve adequate nutrient/metabolite exchange. This need has driven the extension of microfluidic technologies into the area of biomaterials. While construction of perfusable scaffolds is essentially a problem of microfluidic device fabrication, functional implementation of free-standing, thick-tissue constructs depends upon successful integration of external pumping mechanisms through optimized connective assemblies. However, a critical analysis to identify optimal materials/assembly components for hydrogel substrates has received little focus to date. This investigation addresses this issue directly by evaluating the efficacy of a range of adhesive and mechanical fluidic connection methods to gelatin hydrogel constructs based upon both mechanical property analysis and cell compatibility. Results identify a novel bioadhesive, comprised of two enzymatically modified gelatin compounds, for connecting tubing to hydrogel constructs that is both structurally robust and non-cytotoxic. Furthermore, outcomes from this study provide clear evidence that fluidic interconnect success varies with substrate composition (specifically hydrogel versus polydimethylsiloxane), highlighting not only the importance of selecting the appropriately tailored components for fluidic hydrogel systems but also that of encouraging ongoing, targeted exploration of this issue. The optimization of such interconnect systems will ultimately promote exciting scientific and therapeutic developments provided by microfluidic, cell-laden scaffolds.     

Self-report vs. kinematic screening test: prevalence,demographics, and sports biography of yips-affected golfers

The yips is considered a task-specific movement disorder. Its estimated prevalence, however, is high compared to similar neurological movement disorders, possibly resulting from previous studies’ restriction of samples based on skill level, and self-report bias. Alternatively, this high prevalence might be an indication of additional aetiologies, for example the influence of previously played racket sports. We estimated the prevalence of the putting yips across the skill range, using self-reports in one study and a screening test in a second study. We explored if previously played sports matter for the development of the yips. In study 1, yips prevalence (N = 1,306) and golfers’ sports biographies (n = 264) were examined via two online surveys, in which golfers indicated if they were yips-affected. In study 2, golfers (N = 186) putted in a standardised putting test while kinematic and performance measures were recorded. Prevalence was estimated via a kinematic threshold. Sports biographies (n = 119) were obtained via an online survey. Prevalence of currently yips-affected golfers was 22.4% in study 1 and 16.7% in study 2. In both studies, more yips-affected than unaffected golfers had experience in playing racket sports. Yips prevalence remained higher than previously estimated prevalence of other movement disorders but decreased when the whole skill range including professionals and novices was considered. Future studies should use the kinematic screening test instead of self-reports to detect the yips and further investigate the influence of previously played racket sports.     

Confounding compression: the effects of posture,sizing and garment type on measured interface pressure in sports compression clothing

The purpose of this investigation was to measure the interface pressure exerted by lower body sports compression garments, in order to assess the effect of garment type, size and posture in athletes. Twelve national-level boxers were fitted with sports compression garments (tights and leggings), each in three different sizes (undersized, recommended size and oversized). Interface pressure was assessed across six landmarks on the lower limb (ranging from medial malleolus to upper thigh) as athletes assumed sitting, standing and supine postures. Sports compression leggings exerted a significantly higher mean pressure than sports compression tights (P < 0.001). Oversized tights applied significantly less pressure than manufacturer-recommended size or undersized tights (P < 0.001), yet no significant differences were apparent between different-sized leggings. Standing posture resulted in significantly higher mean pressure application than a seated posture for both tights and leggings (P < 0.001 and P = 0.002, respectively). Pressure was different across landmarks, with analyses revealing a pressure profile that was neither strictly graduated nor progressive in nature. The pressure applied by sports compression garments is significantly affected by garment type, size and posture assumed by the wearer.     

Parental mediation during the U.S. 2016 presidential election campaign: How parents criticized,restricted, and co-viewed news coverage

Presidential election campaigns provide opportunities for parents to socialize their children to become politically engaged citizens. However, news coverage of the 2016 U.S. presidential campaign contained inappropriate content, leading parents to possibly restrict or denigrate rather than encourage child campaign news consumption. This study built on literatures in political socialization and parental mediation to explore mediation of campaign news coverage. Data from a representative sample of American parents during the Autumn of 2016 revealed that co-viewing, active mediation, and restrictive mediation were relatively common. The predictors of mediation included political variables, parenting orientations, and child factors, with the latter two often interacting with one another. The results have implications for how we conceptualize both political socialization and parental mediation.