Eccentricity and thermoviscous effects on ultrasonic scattering from a liquid-coated fluid cylinder

Calculation of the scattered field of the eccentric scatterers is an old problem with numerous applications. This study considers the interaction of a plane compressional sound wave with a liquid-encapsulated thermoviscous fluid cylinder submerged in an unbounded viscous thermally conducting medium. The translational addition theorem for cylindrical wave functions, the appropriate wave field expansions and the pertinent boundary conditions are employed to develop a closed-form solution in the form of infinite series. The analytical results are illustrated with a numerical example in which the compound cylinder is insonified by a plane sound wave at selected angles of incidence in a wide range of dimensionless frequencies. The backscattered far-field acoustic pressure amplitude and the spatial distribution of the total acoustic pressure in the vicinity of the cylinder are evaluated and discussed for representative values of the parameters characterizing the system. The effects of incident wave frequency, angle of incidence, fluid thermoviscosity, core eccentricity and size are thoroughly examined. Limiting case involving an ideal compressible liquid-coated cylinder is considered and fair agreement with a well-known solution is established.     

Bubble counter based on photoelectric technique for leakage detection of cryogenic valves

In order to overcome the inconvenience of manual bubble counting, a bubble counter based on photoelectric technique aiming for automatically detecting and measuring minute gas leakage of cryogenic valves is proposed. Experiments have been conducted on a self-built apparatus, testing the performance with different gas inlet strategies （bottom gas-inlet strategy and side gas-inlet strategy） and the influence of gas pipe length （0, 1, 2, 4, 6, 8, 10 m） and leakage rate （around 10, 20, 30, 40 bubbles/min） on first bubble time and bubble rate. A buffer of 110 cm^3 is inserted between leakage source and gas pipe to simulate the downstream cavum adjacent to the valve clack. Based on analyzing the experimental data, experiential parameters have also been summarized to guide leakage detection and measurement for engineering applications. A practical system has already been successfully applied in a cryogenic testing apparatus for cryogenic valves.     

Time-domain training sequences design for MIMO OFDM channel estimation

This paper describes a Least Squares （LS） channel estimation scheme for MIMO OFDM systems based on time-domain training sequence. We first compute the minimum mean square error （MSE） of the LS channel estimation, and then derive the optimal criteria of the training sequence with respect to the minimum MSE. It is shown that optimal time-domain training sequence should satisfy two criteria. First, the autocorrelation of the sequence transmitted from the same antenna is an impulse function in a region longer than the channel maximum delay. Second, the cross-correlation between sequences transmitted from different antennas is zero in this region. Simulation results show that the estimator using optimal time-domain training sequences has better performance than that using optimal frequency training sequence at low signal-to-noise ratio （SNR）. To reduce the training overhead, a suboptimal training sequence is also proposed. Comparing with optimal training sequence, it has low computation complexity and high transmission efficiency at the expense of little performance degradation.     

Cinematic Rendering in Anatomy: A Crossover Study Comparing a Novel 3D Reconstruction Technique to Conventional Computed Tomography

Integration of medical imaging into preclinical anatomy courses is already underway in many medical schools. However, interpretation of two-dimensional grayscale images is difficult and conventional volume rendering techniques provide only images of limited quality. In this regard, a more photorealistic visualization provided by Cinematic Rendering (CR) may be more suitable for anatomical education. A randomized, two-period crossover study was conducted from July to December 2018, at the University Hospital of Erlangen, Germany to compare CR and conventional computed tomography (CT) imaging for speed and comprehension of anatomy. Sixteen students were randomized into two assessment sequences. During each assessment period, participants had to answer 15 anatomy-related questions that were divided into three categories: parenchymal, musculoskeletal, and vascular anatomy. After a washout period of 14 days, assessments were crossed over to the respective second reconstruction technique. The mean interperiod differences for the time to answer differed significantly between the CR–CT sequence (−204.21 ± 156.0 seconds) and the CT–CR sequence (243.33 ± 113.83 seconds; P < 0.001). Overall time reduction by CR was 65.56%. Cinematic Rendering visualization of musculoskeletal and vascular anatomy was higher rated compared to CT visualization (P < 0.001 and P = 0.003), whereas CT visualization of parenchymal anatomy received a higher scoring than CR visualization (P < 0.001). No carryover effects were observed. A questionnaire revealed that students consider CR to be beneficial for medical education. These results suggest that CR has a potential to enhance knowledge acquisition and transfer from medical imaging data in medical education.     

Reading Instruction for English Learners in the Middle Grades: a Meta-Analysis

This meta-analysis synthesizes the last two decades of experimental and quasi-experimental research on reading instruction across academic contexts (e.g., social studies, science, mathematics, English language arts) for English learners (ELs) in grades 4 through 8, to determine (a) the overall effectiveness of reading instruction for upper elementary and middle school students who are ELs and (b) how the magnitude of the effect varies based on student, instructional, and study characteristics. The analysis included a total of 11 studies with 46 individual effect sizes and yielded a mean effect size of g?=?0.35 across all (i.e., standardized and unstandardized) reading measures, g?=?0.01 across standardized reading measures, and g?=?0.43 across unstandardized reading measures. For all reading, unstandardized reading, all vocabulary, and unstandardized vocabulary measures, results suggest that higher quality studies tended to have smaller effects, and these effects were even more evident for unstandardized measures (i.e., one unit increase in study quality was associated with decreased effects: g?=?0.21, g?=?0.30, g?=?0.24, g?=?0.30, respectively). For all comprehension measures, effects were larger for instruction that included both vocabulary and comprehension (g?=?0.39) than for instruction that focused on vocabulary alone (g?=?0.08). Results suggest the benefit of developing and refining high-impact approaches to reading instruction for ELs that can be delivered across content areas and grades.     

Application of neural network in the study of combustion rate of natural gas/diesel dual fuel engine

In order to predict and improve the performance of natural gas/diesel dual fuel engine (DFE), a combustion rate model based on forward neural network was built to study the combustion process of the DFE. The effect of the operating parameters on combustion rate was also studied by means of this model. The study showed that the predicted results were good agreement with the experimental data. It was proved that the developed combustion rate model could be used to successfully predict and optimize the combustion process of dual fuel engine. Project supported by National Lab. for Automotive Engine and Safety, Tsinghua University, China     

Effects of 3D Printing Project-based Learning on Preservice Elementary Teachers’ Science Attitudes,Science Content Knowledge,and Anxiety About Teaching Science

3D printing technology is a powerful educational tool that can promote integrative STEM education by connecting engineering, technology, and applications of science concepts. Yet, research on the integration of 3D printing technology in formal educational contexts is extremely limited. This study engaged preservice elementary teachers (N?=?42) in a 3D Printing Science Project that modeled a science experiment in the elementary classroom on why things float or sink using 3D printed boats. The goal was to explore how collaborative 3D printing inquiry-based learning experiences affected preservice teachers’ science teaching self-efficacy beliefs, anxiety toward teaching science, interest in science, perceived competence in K-3 technology and engineering science standards, and science content knowledge. The 3D printing project intervention significantly decreased participants’ science teaching anxiety and improved their science teaching efficacy, science interest, and perceived competence in K-3 technological and engineering design science standards. Moreover, an analysis of students’ project reflections and boat designs provided an insight into their collaborative 3D modeling design experiences. The study makes a contribution to the scarce body of knowledge on how teacher preparation programs can utilize 3D printing technology as a means of preparing prospective teachers to implement the recently adopted engineering and technology standards in K-12 science education.     

The madelung constant of the sodium chloride crystal lattice

An analysis of the Madelung constant of the sodium chloride crystal lattice has been made, in an effort to supplement information available in undergraduate textbooks. A method of approximation of the constant using the personal computer is presented. An erratum to this article is available at .     

Abstraction and consolidation of the limit procept by means of instrumented schemes: the complementary role of three different frameworks

I investigate the contributions of three theoretical frameworks to a research process and the complementary role played by each. First, I describe the essence of each theory and then follow the analysis of their specific influence on the research process. The research process is on the conceptualization of the notion of limit by means of the discrete continuous interplay. I investigate the influence of the different perspectives on the research process and realize that the different theoretical approaches intertwine. Moreover, I realize that the research study demanded the contribution of more than one theoretical approach to the research process and that the differences between the frameworks could serve as a basis for complementarities.