Codification vs personalisation: A study of the information evaluation practice between aerospace and construction industries

In the emerging digital economy, the management of information in aerospace and construction organisations is facing a particular challenge due to the ever-increasing volume of information and the extensive use of information and communication technologies (ICTs). This paper addresses the problems of information overload and the value of information in both industries by providing some cross-disciplinary insights. In particular it identifies major issues and challenges in the current information evaluation practice in these two industries. Interviews were conducted to get a spectrum of industrial perspectives (director/strategic, project management and ICT/document management) on these issues in particular to information storage and retrieval strategies and the contrasting approaches to knowledge and information management of personalisation and codification. Industry feedback was collected by a follow-up workshop to strengthen the findings of the research. An information-handling agenda is outlined for the development of a future Information Evaluation Methodology (IEM) which could facilitate the practice of the codification of high-value information in order to support through-life knowledge and information management (K&IM) practice.     

Complementary metal oxide semiconductor compatible fabrication and characterization of parylene-C covered nanofluidic channels with integrated nanoelectrodes

Nanochannels offer a way to align and analyze long biopolymer molecules such as DNA with high precision at potentially single basepair resolution, especially if a means to detect biomolecules in nanochannels electronically can be developed. Integration of nanochannels with electronics will require the development of nanochannel fabrication procedures that will not damage sensitive electronics previously constructed on the device. We present here a near-room-temperature fabrication technology involving parylene-C conformal deposition that is compatible with complementary metal oxide semiconductor electronic devices and present an analysis of the initial impedance measurements of conformally parylene-C coated nanochannels with integrated gold nanoelectrodes.No two cells are exactly alike, either in terms of their genome, the genomic epigenetic modification of the genome, or the expressed proteome.¹ The genomic heterogeneity of cells is particularly important from an evolutionary perspective since it represents the stages of evolution of a population of cells under stress.² Because of the important variances in the genome that occur from cell to cell, it is critical to develop genomic analysis technologies which can do single-cell and single molecule genomic analysis as an electronic “direct read” without intervening amplification steps.^{3, 4, 5, 6, 7, 8} In this paper, we present a technique which uses conformal coverage of nanochannels containing nanoelectrodes using a room-temperature deposition of parylene-C, a pin-hole-free, excellent electrical insulator with low autofluorescence.⁹ This procedure should open the door to integration of many kinds of surface electronics with nanochannels. One of the most difficult aspects in introducing electronics into nanochannel technology is the sealing of nanochannel so that the electrodes are not compromised by harsh chemicals or high temperatures. There are various methods to form nanochannels containing nanoelectrodes, including wafer bonding techniques,¹⁰ removal of sacrificial materials,¹¹ and nonuniform sputtering deposition.¹² Methods employing a sacrificial layer removal show the greater compatibility to electronic integration, but current methods to remove sacrificial materials require either high temperatures¹¹ or harsh chemicals.^{13, 14}The basic device consisted of 12 mm long, 100 nm wide, 100 nm high nanochannels interrogated by 22 pairs of 30 nm wide gold nanoelectrodes. The outline of the fabrication process is shown in Fig. ​Fig.1.1. The fabrication process was carried out on a standard 4 in. single-side polished p-type ⟨100⟩ silicon wafer with 100 nm of dry thermal oxide on the top as an insulating layer, which also helped the wetting of the nanochannels. The first step involved nanofabrication of the 25 nm thick nanoelectrodes on the SiO₂ top of the wafer using electron beam lithography (EBL). External gold connection pads were constructed using standard metal lift-off techniques and photolithography to connect to the nanoelectrodes. A Raith E-Line e-beam writing system (Raith USA, Ronkonkoma, NY) was used to expose polymethyl methacrylate (PMMA) for metal lift-off. Figure ​Figure1a1a shows a scanning electron microscopy (SEM) image of the nanoelectrodes. The 100 nm sealed nanochannels were constructed using sacrificial removal techniques. We used EBL to expose a 100 nm thick film of PMMA over the gold nanolines in the region around the nanolines, leaving behind lines of unexposed sacrificial layer of PMMA. We next evaporated 25 nm of SiO₂ over the nanolines to improve the surface wetting properties of nanochannel and then conformally coated with 4 μm thick of parylene-C [poly(chloro-p-xylylene)] using a Specialty Coating Systems model PDS 2010 parylene coating system (SCS Systems, Indianapolis, IN). Access holes for the gold electrodes and the feeding channels were etched through by oxygen plasma and 1:10 buffered oxide etchant. To avoid autofluorescence induced in parylene by an active plasma¹⁵ and ambient UV radiation,¹⁶ it is important not to expose the remaining parylene with plasma and to keep the samples in the dark. The sacrificial removal of PMMA in the nanochannels was done in four steps: (1) soaking the chip in 55 °C 1165 MicroChem resist remover (MicroChem, Newton, MA) for 36 h, (2) room-temperature soaking in 1,2-dichloroethane for 12 h, (3) soaking in room-temperature acetone for 12 h, and (4) drying the nanochannels by critical point drying (CPD-030, BAL-TEC AG, Principality of Liechtenstein), which served to prevent the collapse of the nanochannel resulting from surface tension of the acetone.Open in a separate windowFigure 1(a) SEM image of gold nanoelectrodes; scale bar is 200 nm. (b) 100×100 nm² PMMA nanoline is written over the gold nanoelectrodes by exposure of the surrounding PMMA. (c) Parylene-C conformal coating over the PMMA nanoline. PMMA is dissolved and parylene-C etched by reactive ion etching.Conductance measurements were done using ac techniques. The ac impedance Z_tot of an insulating ionic fluid such as water between electrodes is a complex subject.¹⁷ The most general model for the complex impedance of an electrode in ionic solution is typically modeled as the Randle circuit, which is shown in Fig. ​Fig.22.¹⁷ There are two major contributions to the imaginary part of the impedance: the capacitance of the double layer (C_dl), which is purely imaginary and has no dc conductance, and the impedance due to charge transfer resulting in electrochemical reactions at the electrode∕electrolyte interface, which can be modeled as a contact resistor (R_CT), which is given by the Butler–Volmer equation, which describes the I-V characteristic curve when electrochemical reactions occur at the electrode,¹⁸ in series with a complex Warburg impedance (Z_W) which represents injected charge transport near the electrode;¹⁹ more details can be found in Ref. ²⁰. Since we applied a 10 mV rms ac voltage with no dc offset in our measurements, electrochemical reactions are negligible, which means no electrochemical charge transfer occurred and as a result R_CT goes to infinity. We have drawn a gray box around the elements connected to the Warburg impedance branch of the circuit to show that they are negligible in our analysis.Open in a separate windowFigure 2The equivalent circuit of the nanoelectrodes in contact with water lying atop an insulating SiO₂ film which covers a silicon substrate. The elements in the gray boxes can be ignored in our measurements since there is no hydrolysis at low voltage, while the elements within the dotted box are coupling reactances to the underlying p-doped silicon wafer.In the case of no direct charge injection, the electrodes are coupled by the purely capacitive dielectric layer impedance C_dl to the solvent and are also coupled capacitively by the dielectric SiO₂ film capacitance C_ox to the underlying p-doped silicon semiconductor. We model the semiconductor as a purely resistive material with bulk resistivity ρ_Si. The value of C_dl∕area is on the order of ϵϵ_oκ, where ϵ is the dielectric constant of water (about 80) and κ is the Debye screening parameter of the counterions in solution: κ=ϵϵokBT∕e2Σici∞zi2,²⁰ where ci∞ is the bulk ion concentration of charge z_i. At our salt molarity of 50 mM (1∕2 Tris∕Borate∕EDTA (TBE) buffer), C_dl is approximately 30 μF∕cm² using 1∕κ∼1 nm.In Fig. ​Fig.3,3, we show the ac impedance measurements between pairs nanoelectrodes for both dry and TBE buffer wet nanochannels. The electrodes are capacitively coupled to the underlying silicon substrate through an oxide capacitor C_ox. We model the doped silicon wafer as pure resistors, so there is an R₁ that connects both C_ox, and each C_ox is connected to the ground with an R₂. Curve fitting was done by using the 3SPICE circuit emulation code (VAMP Inc., Los Angeles, CA). We therefore obtained the following parameters for the dry curve: C_ox=1.32 nF, R₁=17.5 μΩ, and R₂=32.8 kΩ. R₁ is not sensitive in the fit as long as it is smaller than the impedance of C_ox. Given ρ_Si of the wafer of 1–10 Ω cm, R₂ should be on the order of 10³ Ω, which is slightly smaller than our fitting results. The same parameters for the wafer coupling parameters were then used for fitting the impedance measurements for wet channels. For TBE buffer solution in the nanochannel, curve fitting yields C_dl=50 pF and R_sol=10⁵ Ω. However, given the dimension of our nanochannels, we should get a transverse resistance R∼10⁹ Ω. One possible explanation for this difference is that the evaporated SiO₂ film which was put over the PMMA is porous and allows buffer to penetrate the oxide film,²¹ but given that the film is only 25 nm thick this would at most increase the cross section by one order of magnitude. However, it is known that there is a high fractional presence of mobile counterions associated with the charged channel walls.²² To calculate exact conductance contribution from the surface charges is a tricky business, but since the surface-to-volume ratios in our nanochannels are much greater than the slits, a larger conductance enhancement can be expected, and more work needs to be done.Open in a separate windowFigure 3ac impedance spectra of TBE buffer solution in a transchannel measurement between adjacent pairs of nanoelectrodes separated by 135 μm. The red circles are data for a dry channel and the solid red line is the fit to the model shown in the upper right hand corner. The green squares and dashed green line are for a nanochannel wet with TBE buffer.We have presented a way to fabricate a nanochannel integrated with electrodes. This technology opens up opportunities for electronic detection of charged polymers. With our techniques to fabricate nanoelectrodes with nanochannels, it should be possible to include integrated electronics with nanofludics, allowing the electronic observation of a single DNA molecule at high spatial resolution. However, the present design has problems. Most of the ac went through the silicon wafer instead of the solution. To enhance the sensitivity, we need either to increase the ratio of current going through the liquid to the current going through the wafer or to have a circuit design that picks up the changes in C_dl and R_sol.     

The Animated Muse: An Interpretive Program for Creative Viewing

Explore a Painting in Depth, an experiment presented in the Canadian Collection of the Art Gallery of Ontario, consisted of a booth that offered seating for two visitors and, opposite them, The Beaver Dam, a 1919 landscape painting by the Canadian artist J. E. H. MacDonald. In a 12‐minute audio‐guided Exercise for Exploring, visitors were invited to engage in a creative process with the imagery of the painting. This paper sketches how the experiment evolved, presents the background of the Exercise for Exploring, and surveys the effects of the exhibit on a wide range of visitors. The question is raised: How can facilitating visitors' creative responses to artworks be part of the museum's educational mandate and its arsenal of interpretive resources? More broadly: Do strategies that foster and privilege visitor creativity, as well as honor the creativity of artists, affect the accessibility and relevance of the museum for the general public?     

Candidates’ use of informal communication on social media reduces credibility and support: Examining the consequences of expectancy violations

ABSTRACT

This experiment (N= 476) investigates how individuals evaluate political candidates who use informal communication on social media. We use expectancy violations theory (EVT) to predict that informal communication will lead to negative evaluations. Our results suggest that politicians’ use of informal communication on social media leads to expectancy violation, which decreases perceived credibility and lessens intention to support a candidate. This effect was not moderated by sex (male versus female) or age (young versus old) of the candidate, nor of participants being the same sex as the candidate. These findings suggest that political figures should use informal communication on social media with caution.     

Mentorship and mitigation of culture shock: foreign‐trained pharmacists in Canada

Immigrants with professional qualifications face unique challenges in adapting personally and professionally to new environments. This ‘double culture shock’ experience may result in disengagement from the professional community due to perceived barriers to integration, with subsequent negative impact on employment prospects and professional role identification. The role of mentors in facilitating professional engagement by foreign‐trained pharmacists within the pharmacy profession has not previously been described in detail. This qualitative study examined the different mentoring strategies used by mentors and foreign‐trained pharmacists negotiating the licensure process in Canada. Using a categorization scheme described previously by major researchers, activity logs of mentors and mentees were examined and coded based on use of mentoring strategies. Focus groups and interviews were also undertaken with separate groups of mentors and mentees to discuss the use of these mentoring strategies for foreign‐trained pharmacists. Results suggest pharmacist‐mentors relied most heavily upon situative‐apprenticeship and humanistic perspectives in their mentoring relationships, and infrequently used critical‐constructivist mentoring activities or techniques. While mentees reported a high level of satisfaction with their mentors and the mentoring experience, they also expressed a desire for more activities of a critical‐constructivist nature as a way of assisting them in mitigating the double culture shock they experience during the licensure process.     

Role reversal within the mentoring dyad: collaborative mentoring on the effective instruction of English language learners

Two purposes guided this mixed‐methods investigation of the collaborative mentoring of teachers in a large school system in the south‐eastern United States. The first was to examine collaborative mentoring as unstructured peer‐to‐peer coaching that emerged spontaneously as teachers shared experiences about effectively teaching English language learners (ELLs). The second was to examine how licensure courses contributed to the emergence of collaborative mentoring. Data collection consisted of questionnaires, mentoring stories, phone interviews, and electronic surveys. After completing courses, 84 teachers reported significant increases in frequency and duration of interactions for sharing best practices with colleagues. The data analysts identified course components, causal links, and catalysts as having created conditions for mentoring. Of 33 novice teachers recently trained in teaching ELLs, most found themselves mentoring veteran teachers yet untrained in teaching this student group. This unexpected reversal of the traditional novice/veteran roles within mentoring dyads addresses a gap in the educational literature.     

Introducing consultancy supervision in a primary school for children with social,emotional and behavioural difficulties

This article describes a pilot study where consultancy supervision was introduced into a primary school for pupils with SEBD in England. School staff engaged with supervision and evaluated their experience through a quantitative and qualitative methodology. The paper explores the nature of supervision, the qualities of the supervisory relationship and the areas of school staff lives to which supervision can be relevant. The project is set in context through reviewing current literature and professional guidelines on supervision. The positive results of the project are described and recommendations and conclusions drawn from the findings.     

‘Whatever you say,say nothing’: student perceptions of online learning and community in Northern Ireland

While there has been extensive research on online communities of enquiry, little work has been done on the extent to which cultural factors can inhibit student participation. In this study of a ‘blended’ model of learning in which students attended face-to-face lectures but were required to take part in online seminars, we found that although most students felt that they belonged to a community of enquiry, there were considerable obstacles to their readiness to respond fully to the views of others. We ascribe these difficulties to the particular cultural context in which the learning occurred in Northern Ireland and contend that course designers should take account of such ‘cultural inhibitors’ in designing online or blended courses.