Existence and uniqueness for a class of nine-bodies central configurations

On some necessary conditions for double pyramidal central configurations with concave heptagon for any given ratio of masses, the existence and uniqueness of a class of double pyramidal central configurations with concave heptagon base for nine-body problems is proved in this paper, and the range of the ratio cr of the circularity radius of the heptagon to the half-height of the double pyramidal central configuration involved in this class configurations is obtained, which is in the interval （√3/3,1.099 600 679）, and the configuration involved in the bodies with any σ∈ （√3/3, 1.099 600 679） can form a central configuration which is a uniquely central configuration is proved.     

表面活性剂对表面等离子体共振分析的影响

利用等温滴定量热仪对表面活性剂聚山梨醇20的临界胶束浓度进行了分析,并利用表面等离子体共振分析仪分析了表面活性剂聚山梨醇20在分子间相互作用实验中的作用。分别利用添加表面活性剂与不添加表面活性剂的运行缓冲液进行分子间相互作用实验,对传感曲线进行了对比分析。结果表明,聚山梨醇20可以降低样品在管路及芯片表面的非特异吸附从而增强分子间的特异性结合。     

浅谈锥形短桩的性能特点

通过分析锥形短桩与土相互作用的特性，在受水平和垂直荷载时锥形短桩的承载能力、设计施工及技术经济对比，阐述了锥形短桩在提高单位承载力、降低成本、加快施工速度、土地的合理使用和可持续开发方面的优势。     

Generalized cone-subconvexlike set-valued maps and applications to vector optimization

The definitions of cone-subconvexlike st-valued maps and generalized cone-subconvexlike set-valued maps in topological vetor spaces are defined by using the relative interiors of ordering cone.The relationships between the two classes of set-valued maps are investigated.and some properties of them are shown.A Gordan type alternative theorem under the assumption of generalized cone-subconvexlikeness of set-valued maps is proved by applying convex separation theorems involoving the relative interiors in infinite dimensional spaces.Finally a necessary optimality condition theorem is shown for a general kind of set-valued vector optimization in a sense of weak E-minimizer.     

Simulation, experimental evaluation and performance improvement of a cone dielectric elastomer actuator

Dielectric elastomer actuators （DEAs） are an emerging class of polymer actuation devices and have extensive application prospect in the field of robotics because of their light weight, high efficiency and large deformation. A cone DEA is manufactured and its working principle is analyzed. To obtain the deformation of elastomer and movement of DEA in advance, a finite element method （FEM） simulation is performed first. According to the working principle, two working equilibrium points of DEA, corresponding to the displacements of DEA with voltage off and on, are obtained and validated by experiments, thus work output in a workcycle is computed. Experiments show that the actuator can respond quickly when voltage is applied and can return to its original position rapidly when voltage is released. Simulation results agree well with experimental ones and the feasibility of DEA simulation is proved, and causes for the small difference between them in displacement output are analyzed. The performance of the actuator is improved from the aspects of both displacement and force output. A diamond four-bar linkage mechanism is used as the preload part and a displacement output of 17 mm is obtained. The force output of one actuating unit is about 1.77 N, so three actuating units are assembled in parallel and the force output is heightened to as high as 5.07 N.     

锥形量热仪的实验技术与测试分析

通过对锥形量热仪的结构原理、测试技术和操作方法的介绍,综合论述了聚合物ABS几种不同配方材料的测试数据图形分析,用测试数据的图型曲线进行分类对比,分析出材料经过各种填料聚合后的阻燃性能优劣.     

锆粉热自燃特性的实验研究

锆粉的热自燃性是造成其发生火灾爆炸等事故的根本原因之一,为确保锆粉在运输、储存以及使用过程中的安全,必需对其反应特性,化学反应动力学和热力学特性有充分的认识。本文通过微量量热仪C80分析锆粉自燃的过程,并且改变各种因素（氧气浓度、表面包覆、锆粉粒径）进行实验,分析各种因素对锆粉热自燃的影响。     

锥形壳体按中径公式设计的限定条件

按GB150《钢制压力容器》的规定,圆筒形壳体、球形壳体和锥形壳体的壁厚都可按中径公式进行计算,且对圆筒形壳体和球形壳体给出了公式应用的限定条件,但对锥形壳体却没有给出限定条件.通过对圆筒形壳体和锥形壳体薄膜应力及壁厚计算公式的分析和比较,提出了锥形壳体按中径公式计算壁厚时的限定条件.     

"锥形化"模式和多面体效应——论中国当代小说两类英雄叙事中人物性格配置的深层相通

中国文学中的英雄叙事具有显著的民族特色,大陆建国初期的红色经典和港台的武侠小说都深受中国传统文化中“和而不同”的民族思维特质的影响。本文试图论述这两种类型英雄叙事中人物塑造方面的相通之处及其文化同质同构性,即对人物性格的“锥形化”处理方式,以及这种处理方式所带来的英雄人物性格配置结构格局中的“点阵模式”。