股权结构、研发投入与企业经营绩效关系研究

以我国316家信息技术业上市公司2014—2018年面板数据作为研究对象,通过运用多元线性回归和调节效应检验研究研发投入与经营绩效的关系及股权结构在二者关系间的调节作用。研究结果表明:第一,研发投入与企业经营绩效正相关,且研发人员投入对企业经营绩效的影响高于研发资金投入;第二,股权集中度、股权制衡度均与企业经营绩效正相关。因此,信息技术企业在提高研发创新能力时不仅需要足够的资金保障,更需要充足的智力支持,且适度提高股权集中度、股权制衡度可在一定程度上提高企业经营绩效。     

基于曲线匹配的星载激光测高仪无场在轨几何定标方法

星载激光测高技术的快速发展急需有效的在轨几何定标方法来校正测高数据中的系统误差。探索一种基于曲线匹配的测高仪无场在轨几何定标方法。该方法利用激光足印高程曲线与DEM进行匹配获得激光足印控制点进而实现定标参数求解,无需到野外布设探测器定标场地。采用资源三号02星激光测高数据进行定标方法验证,并对定标结果进行精度评估。实验表明,经本文的定标方法校正后的测高数据的精度得到显著提升,验证了本方法的有效性。     

基于MIP-SLA的叶片陶瓷型芯光固化成型技术

为解决航空发动机空心涡轮叶片陶瓷型芯的3D打印难题,研究基于图像投影的复杂结构陶瓷型芯光固化成型（mask-image projection stereolithography,MIP-SLA）方法。搭建MIP-SLA工艺系统平台,对陶瓷浆料的制备和打印工艺参数的配置进行研究。分析利用球磨机将光敏树脂和陶瓷颗粒进行混合制备陶瓷浆料时,光敏树脂类型、固相含量、陶瓷颗粒粒径、分散剂含量和球磨时间对陶瓷浆料性能的影响。对不同配置参数下的打印效果进行对比分析,对确定的最佳打印工艺参数进行打印效果验证。     

简化D值法框架结构的侧移估算

通过实例说明了简化D值法对框架结构进行的侧移估算,为结构的初步设计提供方便.     

Between-limb differences in running technique induces asymmetric negative joint work during running

Negative work, which is mainly generated by eccentric muscle contraction, has an important influence on the associated muscle damage. Generally, mechanical parameters are determined for one side of a lower extremity on the assumption of negligible between-limb differences. However, between-limb differences in the negative work of lower extremity joints during running remain unclear. This study examines between-limb differences in negative work and associated mechanical parameters during the contact phase of running. Twenty-five young adult males voluntarily participated in this study. Each participant was asked to run on a straight runway at a speed of 3.0?m?s^?1. Negative work, amplitude, duration of negative power, moment, and angular velocity were computed for both sides of the lower extremities. Significant differences were found in negative work between limbs for the hip (18.9?±?11.7%), knee (13.6?±?10.4%), and ankle (11.8?±?8.5%) joints. For the hip joint, asymmetric negative work was attributable to the between-limb difference in the amplitude of negative power owing to a corresponding difference in the moment. The between-limb differences concerning the duration and amplitude of negative power could explain the asymmetric negative work in the knee joint. The asymmetric negative work of the ankle joint was attributable to the between-limb difference in the amplitude and duration of the negative power and the moment. These results indicate that asymmetric negative work was generated in each lower extremity joint; however, the major mechanical parameters corresponding to the negative work are not the same across the joints.     

一种机载重轨InSAR高精度三维定位方法

在重轨干涉实际测量中,两次飞行航迹难以保持高度重合,飞行高度和姿态不稳定,干涉图像对存在明显不规则的相对形变,难以进行三维定位。通过分析重轨机载InSAR图像对的几何形变和形成原因,提出一种从精准的InSAR成像几何关系出发,通过修正成像参数,实现机载重轨InSAR高精度三维定位的方法。该方法通过引入地面控制点,实现干涉图像对精准的相对定位,生成高精度DEM;并利用高精度DEM,实现机载重轨InSAR高精度三维定位。对比检查点实测结果和定位结果,表明该方法可有效地解决机载重轨InSAR的三维定位困难的问题。     

云科-18选3的孕穗期耐冷性评价及遗传研究

在湛江2004和2005年度,于自然条件下对237个水稻材料进行大田分期播种试验和人工气候箱定温试验。并对所有这些材料进行孕穗期耐冷性评价,其中来源于云南农科院并经单株选择的云科-18选3能耐受12℃的低温,是所有供试材料中最为耐冷的。用云科-18选3作母本与不耐冷材料R6067作父本杂交,以低温条件下的自交结实率作为孕穗期的耐冷性评价指标,采用王建康等分析软件,研究表明云科-18选3孕穗期耐冷性受一对主效基因控制。     

Injectable hybrid inorganic nanoscaffold as rapid stem cell assembly template for cartilage repair

Cartilage injuries are often devastating and most cannot be cured because of the intrinsically low regenerative capacity of cartilage tissues. Although stem-cell therapy has shown enormous potential for cartilage repair, the therapeutic outcome has been restricted by low survival rates and poor chondrocyte differentiation in vivo. Here, we report an injectable hybrid inorganic (IHI) nanoscaffold that facilitates fast assembly, enhances survival and regulates chondrogenic differentiation of stem cells. IHI nanoscaffolds that strongly bind to extracellular matrix (ECM) proteins assemble stem cells through synergistic 3D cell–cell and cell–matrix interactions, creating a favorable physical microenvironment for stem-cell survival and differentiation in vitro and in vivo. Additionally, chondrogenic factors can be loaded into nanoscaffolds with a high capacity, which allows deep, homogenous drug delivery into assembled 3D stem-cell-derived tissues for effective control over the soluble microenvironment of stem cells. The developed IHI nanoscaffolds that assemble with stem cells are injectable. They also scavenge reactive oxygen species and timely biodegrade for proper integration into injured cartilage tissues. Implantation of stem-cell-assembled IHI nanoscaffolds into injured cartilage results in accelerated tissue regeneration and functional recovery. By establishing our IHI nanoscaffold-templated 3D stem-cell assembly method, we provide a promising approach to better overcoming the inhibitory microenvironment associated with cartilage injuries and to advance current stem-cell-based tissue engineering.     

研发外包中的关系契约

在研发项目外包合作关系中,缔约各方的行为不仅受正式契约规制,而且受非正式契约调节。后者对合作研发绩效尤其是持续合作有着重要影响。鉴于此,本文在"关系契约"概念基础上构建了一个研发项目外包者与承包者之间的重复博弈模型,分析研发项目外包合作关系中的非正式治理机制-关系契约的基本特征。结果表明,研发项目外包者和承包者之间的对称性关系契约只与技术成果价值的波动幅度有关,而与承包者的研发生产率系数及私人成本系数等特征参数无关。这对于关系契约的优化设计具有重要的参考价值。     

P企业规模、研发强度、资助强度与政府科技资助的绩效关系研究——基于浙江民营科技企业的实证研究/P P /P P/FONT /P

政府科技资助的绩效已经引起国内外学者的极大关注。本文基于文献研究,建立影响企业R&D投入的实证模型,采用浙江省民营科技企业数据,测度了政府科技资助对企业R&D投入的影响。进一步,分别从企业规模、研发强度、资助强度等不同视角研究政府科技资助的激励效应,探索政府科技资助的激励机理,研究发现：政府科技资助对企业滞后一年的R&D投入有显著促进作用;企业规模越大,政府科技资助激励效果越好;政府科技资助强度越大,激励效果越好;企业研发强度影响政府科技资助激励企业R&D投入。