Light-induced color changes and chemical modification of treated and untreated chestnut wood surface

Abstract

The aim of this work is to study the surface modifications of chestnut (Castanea sativa Mill.) wood by reflectance spectrophotometry and Fourier transform infrared spectroscopy (FTIR) in order to understand the mechanisms that cause changes and to suggest possible solutions to avoid degradation phenomena. The experimental data were statistically treated to evaluate their significance. Concerning the surface protection of wood, starting from the results obtained by testing different commercial products, attention was focused on a novel organic preservative/consolidant product (Linfoil^®) that has attracted great interest in the field of conservation of wooden artifacts. Color monitoring showed that wood surface color undergoes an important variation due to photoirradiation, occurring within the first 24 hours and mainly due to L* decrease and b* increase. Though the protective treatment modifies wood color, nevertheless the product tested seems to protect the wood surface by reducing photoyellowing. FTIR analysis indicated that irradiation caused the degradation of lignin and increased the concentration of the chromophore groups on the wood surface. Changes in the chromaticity coordinates can be linked to the degradation of lignin and to increase of the concentration of carbonyl groups.     

Active recovery of the finger flexors enhances intermittent handgrip performance in rock climbers

This study aimed to (1) evaluate the effect of hand shaking during recovery phases of intermittent testing on the time–force characteristics of performance and muscle oxygenation, and (2) assess inter-individual variability in the time to achieve the target force during intermittent testing in rock climbers. Twenty-two participants undertook three finger flexor endurance tests at 60% of their maximal voluntary contraction until failure. Performances of a sustained contraction and two intermittent contractions, each with different recovery strategies, were analysed by time–force parameters and near-infrared spectroscopy. Recovery with shaking of the forearm beside the body led to a significantly greater intermittent test time (↑ 22%, P?P?P?相似文献   

红外光通信装置设计与实现

采用红外发射管和红外接收管实现了模拟信号和数字信号的红外通信。红外模拟语音系统中,将声音信号转化来的电信号作为模拟信号直接发送,在接收端经过集成放大LM386芯片等处理后,将电信号还原成声音信号,实现红外模拟通信。红外数字通信系统中,增加一路数字信道,采用数字温度传感器DS18B20实时对温度进行采集,通过单片机STC89C52控制将数字信号发送,在接收端经过非门输入单片机通过1602得以显示。     

变温条件下光纤拉曼光谱测试及其意义

对某种光纤在温度范围从-70℃到70℃进行了变温拉曼光谱测试。实验结果表明，光纤的拉曼光谱非常稳定，几乎不随温度变化，说明该光纤化学结构在实验温度范围内能够保持稳定，暗示了光纤质量在实验温度范围内是可以保证的。因此，实验证明拉曼光谱可以作为检测光纤质量的一种有效手段。     

三维红外运动捕捉系统在田径技术诊断中的应用——以女子100m栏运动员王丽为例

利用三维红外运动捕捉系统对运动员王丽的跨栏动作进行影像捕捉、分析,揭示其现有技术动作的特点。研究发现王丽跨栏技术的特点:(1)跨栏步幅大,主要体现在起跨步步幅大,这可能对其腾空时间有影响;着地距离较短,比较合理。(2)起跨腿支撑时间和摆动腿支撑时间较短,说明其下肢肌肉较为有力,能够快速支撑其身体质量。(3)腾空时间较长。     

一种漫反射式光电开关的实现

介绍了一种漫反射式光电开关电路,为了获得较大的探测范围,利用555电路产生1．5KHz调制脉冲和35kHz载频脉冲,接收回路采用集成锁相环路解码器,确保了电路的抗干扰能力,经调试达到了设计要求。     

pH对黄芩苷与牛血清白蛋白相互作用的影响

运用荧光光谱法研究pH对黄芩苷与牛血清白蛋白（BSA）相互作用的影响,结果表明：黄芩苷浓度的增加引起BSA在345am处荧光有规律地猝灭．荧光猝灭光谱及Stem—Volme方程分析发现,在pH为2．5、4．5和7．4体系中均为静态猝灭,且两者猝灭常数随pH增加而增加;Lineweaver—Burk双倒数方程计算pH7．4、温度为290K和310K下,黄芩苷和BSA的结合常数K分别为：K_（290）K=1．2894×10。L·mol^（-1）和K。。：1．0979×10。L·mol^（-2）由热力学参数确定黄芩苷与BSA之间的作用力类型为静电作用力．同步荧光光谱表明,黄芩苷使BSA芳香性氨基酸（Trp,Tyr）残基微环境的变化．     

基于分形的快速最大熵红外图像特征检测

文章针对红外图像目标检测问题,提出一种基于分形的快速最大熵的红外图像特征检测算法.该算法利用DBC方法计算分维数,根据人造物和自然背景分形维差异,确定目标区域;最后,通过二维最大熵原则确定最佳阈值,实现对单目标或者多目标图像分割.该算法能够较好实现红外图像特征检测,有效抑制背景和噪声.     

高压带电设备低功耗测温采集器的设计

该采集器采用8位AVR芯片MEGA88V微处理器。它具有高性能极低功耗的特点。采集器在正常工作模式和掉电模式定时切换运行,大部分时间处于掉电模式运行,很大程度地降低了功耗。因功耗很低,供电采用蓄电池供电,克服近距离取市电困难的缺点。温度采集采用温度传感器和精密电阻串联的工作方式,通过热敏电阻分得的电压根据欧姆定律换算为电阻值．再通过电阻一温度特性表查表获得温度值。由于热敏电阻感应-15度到315度的宽温度范围．为了增加采集精度。采用两段不同阻值精密电阻分段采集。温度数据使用红外脉宽编码方式定时主动传输,并使用软件产生38K调制载波增加收发距离,实现了高压带电设备内无线温度数据检测。该采集器已投入实际运行。     

岛津TOC-V_(CPH)分析仪测定地表水和废水中的总有机碳

总有机碳能够完全反映水中有机污染程度,已被许多国家所采用,我国也将它列入"污水综合排放标准"中.文章采用岛津TOC-VCPH 分析仪,运用燃烧氧化-非色散红外吸收法测定了福州市辖区的地表水和不同行业工业废水中的总有机碳(TOC).结果表明,该方法检出限为0.06 ms/L,对于TOC浓度在0-100 ms/L范围内水样的测定,相对标准偏差控制在3%以内;具有操作简单、成本较低、灵敏度高,能满足环境水样中TOC项目的监测要求.