A NEW ALGORITHM FOR FAST HIDDEN SURFACE REMOVAL OF COMPLEX OBJECTS

ＡＮＥＷＡＬＧＯＲＩＴＨＭＦＯＲＦＡＳＴＨＩＤＤＥＮＳＵＲＦＡＣＥＲＥＭＯＶＡＬＯＦＣＯＭＰＬＥＸＯＢＪＥＣＴＳＦｕＹｕｑｉｎｇ（富煜清）；ＨｕａｎｇＪｉｎｆａ（黄金法）；ＬｉｎＦｅｎｇ（林峰）（ＤｅｐａｒｔｎｉｅｎｔｏｆＲａｄｉｏＥｎｓｉｎｅｅｒｉ...     

自组装膜的表面反应及自组膜的构筑

界面反应已成为界面自组装构筑的一个重要反应方面.从自组装膜的形成及自组装膜的气相、液相、膜上分子交联反应以及膜表面大分子寡聚体的设计组装等几个方面的表面反应对近年来自组装膜构筑方面的进展予以分析和综述.引用文献23篇.     

Application of response surface methodology in medium optimization for pyruvic acid production of <Emphasis Type="Italic">Torulopsis glabrata</Emphasis> TP19 in batch fermentation

Response surface methodology （RSM） was used to optimize the fermentation medium for enhancing pyruvic acid production by Torulopsis glabrata TP19. In the first step of optimization, with Plackett-Burman design, ammonium sulfate, glucose and nicotinic acid were found to be the important factors affecting pyruvic acid production significantly. In the second step, a 23 full factorial central composite design and RSM were applied to determine the optimal concentration of each significant variable. A second-order polynomial was determined by the multiple regression analysis of the experimental data. The optimum values for the critical components were obtained as follows： ammonium sulfate 0.7498 （10.75 g/L）, glucose 0.9383 （109.38 g/L） and nicotinic acid 0.3633 （7.86 mg/L） with a predicted value of maximum pyruvic acid production of 42.2 g/L. Under the optimal conditions, the practical pyruvic acid production was 42.4 g/L. The determination coefficient （R^2） was 0.9483, which ensures adequate credibility of the model. By scaling up fermentation from flask to jar fermentor, we obtained promising results.     

Development of integrated precision vibration-assisted micro-engraving system

A novel precision vibration-assisted micro-engraving system was developed by the integration of fast tool servo and ultrasonic elliptical vibration system, in which the flexure hinge was designed to avoid backlash and PID control algorithm was established to guarantee specific precision. Apart from experimental validation of the performance of the system, various micro-V-grooves cutting experiments on aluminum alloy, ferrous material and hard cutting material were performed, in which Kistler force sensor was used to measure cutting force. Through experiments, it was clear that the vibration-assisted micro-engraving system can ensure good quality of micro-V-grooves and reduce cutting force by about 60% compared with traditional removal process without ultrasonic vibration.     

机械力化学技术制备磷酸法活性炭及其碘吸附性能的研究

研究采用机械力化学技术制备了吸附性能良好的活性炭。试验采用Plackett—Burman（PB）实验设计和Box—BehnkenDesign（BBD）设计法对影响活性炭碘吸附值的6个条件进行筛选优化。PB实验设计与统计学分析表明酸屑比、研磨时间、活化温度、磷酸浓度是影响活性炭碘吸附值的四个关键因素。以碘吸附值为响应目标,对四因素进行BBD设计,并经响应面法优化分析得到影响活性炭碘吸附值的二阶模型,确定了机械力化学技术制备磷酸活性炭的较优操作条件为：酸屑比2．00,研磨时间22min,活化温度406℃,磷酸浓度20％,活性炭的碘吸附值达1195．23mg／g。     

响应面法优化软包装风味鱼的加工工艺

采用响应面法优化了风味鱼的加工工艺参数.通过对盐渍时间、盐渍浓度、卤制时间以及杀菌温度和时间的研究,确定风味鱼块的加工方法为：新鲜鱼切块后,采用4%的食盐在常压下盐渍3.8h或真空下盐渍100min,清洗沥干,再用一定比例的调味液卤制89min,沥干后送入鼓风干燥箱中进行阶段干燥（温度为30℃,干燥30min,升温至50℃干燥30min,最后升至100℃干燥2h）,取出冷却后进行真空包装,在115℃-118℃的条件下杀菌20min,得到的软包装风味鱼具有外观好、香味浓郁、耐咀嚼等特点.     

Anisotropic fluoride nanocrystals modulated by facet-specific passivation and their disordered surfaces

Rutile-type fluorides have been proven to be active components in the context of emerging antiferr-omagnetic devices. However, controlled synthesis of low-dimensional, in particular two-dimensional (2D), fluorides in a predictable and deterministic manner remains unrealized because of a lack of efficient anisotropic control, which impedes their further development in reduced dimensions. We report here that altered passivation of {110} growing facets can direct the synthesis of rutile-type fluoride nanocrystals into well-defined zero-dimensional (0D) particulates, one-dimensional (1D) rods and 2D sheets in a colloidal approach. The obtained nanocrystals show positive exchange bias and enhanced magnetic transition temperature from the coexistence of long-range antiferromagnetic order and disordered surface spins, making them strong alternatives for flexible magnetic devices and sensors.     

Regulating surface wrinkles using light

Regulating existing micro and nano wrinkle structures into desired configurations is urgently necessary yet remains challenging, especially modulating wrinkle direction and location on demand. In this work, we propose a novel light-controlled strategy for surface wrinkles, which can dynamically and precisely regulate all basic characteristics of wrinkles, including wavelength, amplitude, direction and location (λ, A, θ and L_c), and arbitrarily tune wrinkle topographies in two dimensions (2D). By considering the bidirectional Poisson''s effect and soft boundary conditions, a modified theoretical model depicting the relation between stress distributions and the basic characteristics was developed to reveal the mechanical mechanism of the regulation strategy. Furthermore, the resulting 2D ordered wrinkles can be used as a dynamic optical grating and a smart template to reversibly regulate the morphology of various functional materials. This study will pave the way for wrinkle regulation and guide fabrication technology for functional wrinkled surfaces.     

基于熵权-TOPSIS模型的大风浪条件下引航员登船水域选址

为保障大风浪条件下引航员登船安全、周边船和被引船的安全以及港口的安全高效运营,选取合理的引航员登船水域至关重要。综合考虑熵权法和TOPSIS法的优点,基于熵权-TOPSIS模型对大风浪条件下引航员登船水域进行优选研究。以大风浪条件下广州港引航员登船水域选址为例,运用该模型对3个备选方案进行评价,求得方案2的相对贴近度最大。该方案所述的引航员登船水域为大风浪条件下最优登船水域,且与实际选址一致。经实例验证,该模型较为可靠,实用性强。     

基于SWMM的地表径流量与城市下垫面和降雨特征关系的空间分析——以中国科学院大学雁栖湖校区为例

以中国科学院大学雁栖湖校区为例,用城市雨洪管理模型（SWMM）模拟2016-2017年48场降雨事件中所有子汇水小区的径流过程;在验证可靠的基础上,探讨径流量空间分布与降雨和下垫面的关系,是开展防汛工作的重要基础。结果表明,径流量高值区多位于沥青小区,而低值区多位于绿地小区。沥青最易产流,绿地最不易产流。砌砖易产生中等量级的径流,混凝土较砌砖更易产流,但二者在不同降雨事件下的产流规律相似。沥青小区和砌砖小区的地表径流量均与坡度呈极显著或显著线性正相关关系。对沥青-砌砖和沥青-绿地小区,将非渗透面积比例（PIC）降至60%可明显控制其暴雨和大雨径流。要明显控制大暴雨径流,可将沥青-绿地小区的PIC降至30%以下;但降低PIC对沥青-砌砖小区大暴雨径流的控制作用不明显。研究结果可为海绵城市建设和城市内涝防洪提供理论依据和决策建议。