铜铬钼／=二氧化硅三元复合加氢催化剂中铜,铬,钼的分析

本文报导了Ｃｕ＝ｅｒ－Ｍｏ／ｓｉｏ２三元复合催化剂中Ｃｕ，Ｃｒ，Ｍｏ的测定方法，此法简便，快速，获得令人满意结果。     

铜-铬-钼-稀土/二氧化硅及铜-稀土/二氧化硅复合加氢催化剂的研究

在本研究中制备了一系列Ｃｕ－Ｃｒ－Ｍｏ－ＲＥ／ＳｉＯ２和Ｃｕ－ＲＥ／ＳｉＯ２催化剂。研究结果表明：在Ｃｕ／ＳｉＯ２催化剂中,引进Ｃｒ、Ｍｏ和稀土氧化物后能显著延长催化剂寿命。这一结果并用ＸＰＳ光谱对催化剂表面及用ＴＧ对催化剂抗结焦性能进行了分析研究结论为：Ｃｕ－Ｃｒ－Ｍｏ－ＲＥ／ＳｉＯ２和Ｃｕ－ＲＥ／ＳｉＯ２催化剂的负荷比Ｃｕ／ＳｉＯ２催化剂显著提高。     

3D finite element analysis of the residual stresses in butt-welded plates with modeling of the electrode-movement

In this paper the residual stresses in a butt-welded plate of2.25Cr 1Mo has been analyzed using a 3D and transient finite element （FE） model. Also the effect of the welding-electrode speed has been studied using death and birth of FEs. For this purpose, a coupled thermo-mechanical FE solution has been used to obtain the temperature distribution and the resulting residual stresses. Also, the variations of the physical properties of the material with temperature have been taken into account. Results show that the residual stresses in the heat affected zone （HAZ） are maximum and change along the weld and also in the plate-thickness. It has been shown that use of the 3D and transient model will lead to more accurate and realistic results which are well compared with the experimental test data.     

An investigation of a novel three-dimensional activity monitor to predict free-living energy expenditure

Abstract

The aim of this study was to assess the capability of the 3dNX? accelerometer to predict energy expenditure in two separate, free-living cohorts. Twenty-three adolescents and 14 young adults took a single dose of doubly labelled water and wore a 3dNX? activity monitor during waking hours for a 10-day period while carrying out their normal routines. Multiple linear regression with backward elimination was used to establish the strength of the associations between various indices of energy expenditure, physical activity counts, and anthropometric variables. 3dNX? output accounted for 27% and 35% of the variance in the total energy expenditure of the adolescent and young adult cohort, respectively. The explained variance increased to 78%, with a standard error of estimate of 7%, when 3dNX? output was combined with body composition variables. The 3dNX? accelerometer can be used to predict free-living daily energy expenditure with a standard error of estimate of 1.65 MJ in adolescents and 1.52 MJ in young adults. The inclusion of anthropometric variables reduces the error to approximately 1 MJ. Although it remains to cross-validate these models in other populations, early indications suggest that the 3dNX? provides a useful method of predicting energy expenditure in free-living individuals.     

刑法学课程教学改革研究

刑法学课程是作为我校思想政治教育专业的必修课程来开设的,非专业性、有限的课时数与刑法学教学内容的庞杂性、刑法学通识教育目标与司法制度要求之间的冲突以及我校新升本的地方院校的校情所决定的传统授课模式和教学目标转型阶段的教学现状,决定了我校的刑法学教学必须进行相应的调整和改革,以提升刑法学的教学效果和教学水平。     

CODCr分析废液中白银的回收

研究了运用化学沉淀法回收CODCr分析废液中银的方法，银的沉淀经减压过滤、洗涤及高温还原而得到金属单质银，银的回收率达97．51％，回收银的纯度为98．5％。     

40Cr盘条轧制工艺的研究

以控制轧制理论为基础，对40Cr钢过冷奥氏体转变进行了试验与研究。通过热模拟试验建立了40Cr钢的冷却转变曲线（CCT图），以此来确定高线吐丝温度、斯太尔摩速度、风机及保温盖开启等重要工艺参数。     

不同Co含量对超音速火焰喷涂WC-xCo-3Cr涂层组织和性能的影响

通过超音速火焰喷涂工艺在Cr12模具钢表面上喷涂制备了WC-x Co-3Cr(x=8,10,12,14)涂层,并采用金相显微镜、扫描电镜、显微硬度仪和摩擦磨损试验机表征分析涂层的微观结构、显微硬度、耐磨损性能和耐腐蚀性,考察了不同Co含量对涂层组织和性能的影响。结果表明,Cr12模具钢超音速火焰喷涂后表面的耐磨损性能比喷涂前的基体耐磨损性能有较大的提高;表面硬度在不同程度上都得到提高,界面结合良好,其中WC-10Co-3Cr涂层的组织致密性最好、显微硬度最高、耐磨损及耐腐蚀性能最好。     

3Cr2W8V模具钢球化退火工艺研究

分析模具凹模坯料用冷冲压制造型腔时开裂的原因，进行了几种3Cr2W8V模具钢球热处理软化工艺试验，观察了组织，测定了力学性能，获得实际生产中可行的3Cr2W8V模具钢球化退火工艺．     

含铬(Ⅵ)废水的无害化处理研究

采用硫酸亚铁还原法,对实际工厂中的含铬废水进行无害化处理,指出硫酸亚铁还原法处理工业含铬废水在实际应用中的优势.