输变电GIS系统中电力线路要素模型库的建立

在输变电GIS三维可视化过程中,建立电力线路要素三维模型库是非常重要的。本文给出了建立三维模型库的方法。使用3DMAX作为建模工具,并用OSG做为底层的渲染基础框架设计了8种电力线路模型原型,提出了动态模型实列的概念和分页加载渲染的方法,制定了数据存储格式与标准,使得GIS系统能够直接从模型库中调用线路杆塔模型,实现了输电线路的三维全景仿真。     

介孔纳米γ-Al_2O_3对稀土镧（Ⅲ）的吸附性能研究

以溴化十六烷基三甲铵（CTAB）为模板剂,采用溶胶-凝胶法合成介孔纳米γ-Al2O3,用透射电镜（TEM）、比表面测定（BET）、X射线衍射（XRD）、和N2的吸附-脱附技术、Zetaplus电位测定,对所得的介孔纳米γ-Al2O3进行了表征。考察了介孔纳米γ-Al2O3在静态条件下对La（Ⅲ）的吸附性能。探讨了溶液的初始浓度、pH值、时间和温度对吸附性能的影响。结果表明：介孔纳米γ-Al2O3对La（Ⅲ）有很好的吸附性能,其吸附行为符合Freundlich吸附等温式。     

基于MIP-SLA的叶片陶瓷型芯光固化成型技术

为解决航空发动机空心涡轮叶片陶瓷型芯的3D打印难题,研究基于图像投影的复杂结构陶瓷型芯光固化成型（mask-image projection stereolithography,MIP-SLA）方法。搭建MIP-SLA工艺系统平台,对陶瓷浆料的制备和打印工艺参数的配置进行研究。分析利用球磨机将光敏树脂和陶瓷颗粒进行混合制备陶瓷浆料时,光敏树脂类型、固相含量、陶瓷颗粒粒径、分散剂含量和球磨时间对陶瓷浆料性能的影响。对不同配置参数下的打印效果进行对比分析,对确定的最佳打印工艺参数进行打印效果验证。     

Between-limb differences in running technique induces asymmetric negative joint work during running

Negative work, which is mainly generated by eccentric muscle contraction, has an important influence on the associated muscle damage. Generally, mechanical parameters are determined for one side of a lower extremity on the assumption of negligible between-limb differences. However, between-limb differences in the negative work of lower extremity joints during running remain unclear. This study examines between-limb differences in negative work and associated mechanical parameters during the contact phase of running. Twenty-five young adult males voluntarily participated in this study. Each participant was asked to run on a straight runway at a speed of 3.0?m?s^?1. Negative work, amplitude, duration of negative power, moment, and angular velocity were computed for both sides of the lower extremities. Significant differences were found in negative work between limbs for the hip (18.9?±?11.7%), knee (13.6?±?10.4%), and ankle (11.8?±?8.5%) joints. For the hip joint, asymmetric negative work was attributable to the between-limb difference in the amplitude of negative power owing to a corresponding difference in the moment. The between-limb differences concerning the duration and amplitude of negative power could explain the asymmetric negative work in the knee joint. The asymmetric negative work of the ankle joint was attributable to the between-limb difference in the amplitude and duration of the negative power and the moment. These results indicate that asymmetric negative work was generated in each lower extremity joint; however, the major mechanical parameters corresponding to the negative work are not the same across the joints.     

一种机载重轨InSAR高精度三维定位方法

在重轨干涉实际测量中,两次飞行航迹难以保持高度重合,飞行高度和姿态不稳定,干涉图像对存在明显不规则的相对形变,难以进行三维定位。通过分析重轨机载InSAR图像对的几何形变和形成原因,提出一种从精准的InSAR成像几何关系出发,通过修正成像参数,实现机载重轨InSAR高精度三维定位的方法。该方法通过引入地面控制点,实现干涉图像对精准的相对定位,生成高精度DEM;并利用高精度DEM,实现机载重轨InSAR高精度三维定位。对比检查点实测结果和定位结果,表明该方法可有效地解决机载重轨InSAR的三维定位困难的问题。     

云科-18选3的孕穗期耐冷性评价及遗传研究

在湛江2004和2005年度,于自然条件下对237个水稻材料进行大田分期播种试验和人工气候箱定温试验。并对所有这些材料进行孕穗期耐冷性评价,其中来源于云南农科院并经单株选择的云科-18选3能耐受12℃的低温,是所有供试材料中最为耐冷的。用云科-18选3作母本与不耐冷材料R6067作父本杂交,以低温条件下的自交结实率作为孕穗期的耐冷性评价指标,采用王建康等分析软件,研究表明云科-18选3孕穗期耐冷性受一对主效基因控制。     

Injectable hybrid inorganic nanoscaffold as rapid stem cell assembly template for cartilage repair

Cartilage injuries are often devastating and most cannot be cured because of the intrinsically low regenerative capacity of cartilage tissues. Although stem-cell therapy has shown enormous potential for cartilage repair, the therapeutic outcome has been restricted by low survival rates and poor chondrocyte differentiation in vivo. Here, we report an injectable hybrid inorganic (IHI) nanoscaffold that facilitates fast assembly, enhances survival and regulates chondrogenic differentiation of stem cells. IHI nanoscaffolds that strongly bind to extracellular matrix (ECM) proteins assemble stem cells through synergistic 3D cell–cell and cell–matrix interactions, creating a favorable physical microenvironment for stem-cell survival and differentiation in vitro and in vivo. Additionally, chondrogenic factors can be loaded into nanoscaffolds with a high capacity, which allows deep, homogenous drug delivery into assembled 3D stem-cell-derived tissues for effective control over the soluble microenvironment of stem cells. The developed IHI nanoscaffolds that assemble with stem cells are injectable. They also scavenge reactive oxygen species and timely biodegrade for proper integration into injured cartilage tissues. Implantation of stem-cell-assembled IHI nanoscaffolds into injured cartilage results in accelerated tissue regeneration and functional recovery. By establishing our IHI nanoscaffold-templated 3D stem-cell assembly method, we provide a promising approach to better overcoming the inhibitory microenvironment associated with cartilage injuries and to advance current stem-cell-based tissue engineering.     

CORBA技术在3G网络管理系统中的应用

文章主要介绍了CORBA技术以及它在3G网络管理系统中的应用.     

模具专业机械制图课程的教学改革研究

文章提出以三维CAD软件为教学手段,整合教学内容,添加模具零件图、装配图等专业知识,结合企业真实案例的教学方法,对高职模具专业机械制图课程进行教学改革。实践证明,只有将理论和实践相结合,紧跟时代和企业步伐,才能改变传统的枯燥教学模式,提高学生的学习兴趣,为后续的课程打下坚实基础。     

Na2S2O3溶液标定实验的误差分析

本文针对Na2S2O3溶液标定实验的误差分析这一难点,通过引导学生归纳总结,得到的结论为所有的误操作都可引起消耗的V(Na2S2O3)变化,进而导致测定结果C(Na2S2O3)的变化,由此,笔者给出了如何避免误操作的建议.