钛合金表面激光熔覆TiC涂层显微结构和耐磨性

采用HL-5000型横流CO2激光加工机在TC4钛合金表面激光熔覆TiC+Ti和TiC+Ti+F102复合涂层。通过SEM、EDAX、XRD、HXD-1000TMC型显微硬度计,HT-600型高温摩擦磨损试验机,分析了熔覆层的显微组织、成分、物相,测试了激光熔覆层的显微硬度和滑动摩擦磨损性能。结果表明,激光熔覆制备的TiC复合涂层与基体呈冶金结合,在TiC+Ti激光熔覆层中,熔覆层的组织是在Ti基体上分布着TiC树枝晶;在TiC+Ti+F102激光熔覆层中,TiC颗粒发生了部分溶解,熔覆层的组织是在Ti基和γ-Ni基的基体上分布着细小的TiC颗粒和TiC树枝晶。TiC+Ti激光熔覆层的硬度约为700 HV0.1,TiC+Ti+F102激光熔覆层的硬度约为800 HV0.1,两种复合涂层耐磨性均比TC4钛合金显著提高。     

不同激光熔覆材料涂层的耐磨性能比较

对宽带激光熔覆不同熔覆材料的复合涂层的耐磨性能进行研究。结果表明Ni60B熔覆层的硬度高于40Cr基材的硬度,Ni60B＋WC梯度复合涂层具有最高的硬度,对于提高零件的抗磨损性能比较有利;Ni60B熔覆层和Ni60B＋WC熔覆层均适合修复轴类零件;三层梯度复合涂层磨痕宽度最小,具有最好的耐磨性。     

Using Brillouin fiber-optic ring laser to provide base station with uplink optical carrier in a 10 GHz radio over fiber system

In this paper, a 10 GHz radio over fiber system is analyzed. The Brillouin fiber-optic ring laser is used in the
center station (CS) to suppress the optical carrier for the modulation depth enhancement. Simultaneously, the Stockes wave
induced by the Brillouin amplification injects and locks the Fabry-Perot (FP) laser to output a signal-mode optical source,
which works as the uplink optical carrier.     

激光毛化板和喷丸板的摩擦行为研究

1　Ｉｎｔｒｏｄｕｃｔｉｏｎ　Ｔｈｅｓｕｒｆａｃｅｔｅｘｔｕｒｅｓｔｅｅｌｓｈｅｅｔｓｈａｖｅｂｅｅｎｅｘｔｅｎｓｉｖｅｌｙｕｓｅｄｉｎａｕｔｏｍｏｂｉｌｅｉｎｄｕｓｔｒｙｆｏｒｔｈｅｉｒｇｏｏｄｆｏｒｍａｂｉｌｉｔｙａｎｄｐａｉｎｔｉｎｇｐｅｒｆｏｒｍａｎｃｅ.Ａｓｋｎｏｗｎ,ｔｈｅｒｅｅｘｉｓｔｅｓｆｒｉｃｔｉｏｎｂｅｔｗｅｅｎｔｈｅｓｈｅｅｔａｎｄｍｏｄｅｌｄｕｒｉｎｇｓｔａｍｐｉｎｇ.Ｗｈｅｎｔｈｅｓｈｅｅｔｉｓｄｅｆｏｒｍｅｄｉｎｔｏａｗｏｒｋｐｉｅｃｅ,ｔｈｅｐｒｏｃｅｓｓｏｆｓｈｅｅｔ…     

低能量激光治疗腰棘上韧带和棘间韧带损伤的临床疗效观察

用半导体激光仪所发生的低能量激光对 32例棘上韧带和棘间韧带同时损伤的病人进行了治疗。病人的平均年龄是 39.31± 1 .5 3岁 ,平均病程是 93.5 9± 2 2 .73天 ,78.1 3%的病人都是在体育活动中受伤。以 1 0度疼痛评分法结合腰部运动和局部按压作为疗效评定标准。经过平均 7.38± 0 .5 6次的治疗后 ,痊愈率是 5 0 % ,显效率是 31 .3% ,有效率是 1 5 .6 % ,无效率是 3.1 %。总有效率是 96 .9%。本临床观察发现 ,激光治疗棘上韧带和棘间韧带损伤具有有效率高、平均治疗次数少、见效快的特点 ,是治疗此类软组织运动创伤的较好方法之一。     

Smart responsive organic microlasers with multiple emission states for high-security optical encryption

Modern high-security cryptography and optical communication call for covert bit sequences with high coding capacity and efficient authentication. Stimuli-responsive lasing emissions with easily distinguishable readout are promising in the coding field as a novel cryptographic primitive, while the application is frequently restricted by the limited number of emission states. Here, we report a strategy of achieving multiple competitive lasing signals in responsive organic microspheres where a donor–acceptor pair was introduced. The competitive lasing from the donor and acceptor was reversibly switched by modulating the competition between the radiative rate of the donor and the rate of energy transfer, and the generated multiple lasing signals enabled a quaternary coding for recognizable cryptographic implementation. Data encryption and extraction were demonstrated using a 4 × 4 microlaser array, showing vast prospects in avoiding the disclosure of security information. The results offer a comprehensive understanding of excited-state dynamics in organic composite materials, which may play a major role in high-security optical recording and information encryption.     

提高光学接收效率的一种方法

针对半导体激光器所发激光束偏振性差、发散角大的特点，提出了一种用中间拖孔的平面镜代替通常所用分束片的方法，来达到分离光束的目的，并且与分束片相比，光学效率可得到明显提高．     

超短脉冲激光和钛宝石飞秒激光器

该文介绍了飞秒激光的特点、应用以及钛宝石激光器的相关理论。     

Martlab在曲面建模中的应用

在准分子激光手术治疗中,手术的精确性和模型的准确性描述是重点同时也是难点,它直接决定手术的效果。针对单纯性近视情况,提出了一种新的理论模型,给出了其数学表达式,并在准分子激光治疗机上进行PMMA板试验,取得了很好的效果。     

一种小型CO2激光加工机的研制

介绍了一种小型的二维CO2激光加工机的设计方案和该机器可达到的性能指标，指出了其存在的问题和解决的途径。