Smart surfaces for architectural heritage: Preliminary results about the application of TiO2-based coatings on travertine

The development and application of self-cleaning treatments on historical and architectural stone surfaces could be a significant improvement in conservation, protection and maintenance of Cultural Heritage. In this paper, a TiO₂-based coating has been investigated in order to evaluate its possible use as a self-cleaning treatment. This coating was obtained by a sol-gel and a hydrothermal (134 °C) processes and then it was applied on travertine (a limestone often used in historical and monumental buildings) in two ways, obtaining a single-layer and a three-layer treatment, respectively. In order to verify its potential use in the field of Cultural Heritage, the maintenance of appearance properties of the treated travertine surfaces was monitored by colour and gloss analyses. Besides, de-pollution and soiling removal tests were carried out under ultraviolet-light exposure to evaluate photo-induced effects and self-cleaning efficiency. Results seem to allow the use of TiO₂-based treatments on historical and architectural surfaces made up by travertine, where de-pollution and self-cleaning photo-induced effects are well evident, maintaining their original visual appearance. Anyway, before applying TiO₂-based coatings as conservative treatments, further tests are needed especially on their durability, that is mandatory for Cultural Heritage applications. On-site test in an urban environment and accelerated test by weatherometer are currently under way.     

Microfluidics based on ZnO/nanocrystalline diamond surface acoustic wave devices

Surface acoustic wave (SAW) devices with 64 μm wavelength were fabricated on a zinc oxide (ZnO) film deposited on top of an ultra-smooth nanocrystalline diamond (UNCD) layer. The smooth surface of the UNCD film allowed the growth of the ZnO film with excellent c-axis orientation and low surface roughness, suitable for SAW fabrication, and could restrain the wave from significantly dissipating into the substrate. The frequency response of the fabricated devices was characterized and a Rayleigh mode was observed at ∼65.4 MHz. This mode was utilised to demonstrate that the ZnO/UNCD SAW device can be successfully used for microfluidic applications. Streaming, pumping, and jetting using microdroplets of 0.5 and 20 μl were achieved and characterized under different powers applied to the SAW device, focusing more on the jetting behaviors induced by the ZnO SAW.     

Arthrospira maxima (Spirulina) prevents endoplasmic reticulum stress in the kidney through its C-phycocyanin

正Arthrospira maxima (Spirulina) is a cyanobacterium which is considered a nutraceutical because it has antioxidant, anti-inflammatory, and cytoprotective properties in different renal disease models (RodriguezSánchez et al., 2012; Aziz et al., 2018; Memije-Lazaro et al., 2018).     

Self-cleaning materials on Architectural Heritage: Compatibility of photo-induced hydrophilicity of TiO2 coatings on stone surfaces

Titanium dioxide (TiO₂) can be used to realize transparent self-cleaning coatings on stone surfaces as an active and preventive protection system, limiting cleaning and maintenance actions, reducing their costs in Architectural Heritage. This self-cleaning ability is due to photo-induced hydrophilicity on treated surfaces. The aim of this investigation is to analyze this effect, since it could bring to a greater water absorption, a potential source of damage for stone surfaces. Titania sol, obtained by sol-gel and hydrothermal processes, was deposited on travertine by spray coating, in two different ways. Water absorption by capillarity, static contact angle and a specific surface water absorption analysis were assessed before and after the TiO₂ treatments. The effects of deposited amount of titania on the characteristics of treated surfaces were evaluated. It was shown that there were no evident changes in the substrate reactivity without ultraviolet (UV) light exposure, while it seems that hydrophilicity due to UV light does not lead to higher water absorption, thus encouraging the use of TiO₂ coatings in the field of Architectural Heritage. However, before widely applying this conservative treatment, some further researches are recommended in order to better assess its durability and sustainability.