双端口存储器在加密机中的应用

本文论述一个由单片机和双端口存储器构成的加密机,阐述了加密机的工作原理和操作流程.由于双端口RAM的采用,支持中断机制,同步与协调控制单片机与算法单片机并行工作,双端口RAM弹性连接控制单片机与算法单片机,匹配它们的传输速率和处理能力,提高了加解密的处理效率,控制单片与主机之间可进行全双工通信,这样的传输可以节省控制单片机的时间,提高效率.     

用单片微机8051设计的防盗报警系统

利用单片微机8051设计的防盗报警系统,包括硬件设计和软件设计两部分。该系统可用于宾馆、仓库等,它 能对受监测点进行自动监测,一旦出现盗情,能立即报警,并指示被盗的地点。     

木屑制取草酸新法

通过硫酸水解,将木屑中的纤维素转化为葡萄糖,在催化剂作用下,用硝酸将其氧化,制取了草酸.经研究,本法最佳配料比及工艺条件为:干木屑∶硫酸(50%)∶硝酸(65%)∶催化剂=30g∶30mL∶4mL∶0.03g,浸泡水解时间为4h以上,反应时间5h以上,反应温度控制在65～70℃.所得草酸纯度为97.5%,收率达50%.对产品理化数据指标及工艺环保措施进行了分析.     

防火墙及网络协议综合实验平台构建

给出了为配合信息安全教学所构建的网络防火墙综合实验平台的一种设计方案,介绍了该综合实验平台的硬件系统结构,详细阐述了该系统的软件设计和实现方案,最后给出了实验内容设置及实验目的。     

单片机技术在CRT显示器中的运用

本文从提高显示器的可靠性、适应性、智能化、节能、“即插即用”等几方面阐述了在CRT显示器中引入单片机技术的必要性；并阐明了引入单片机技术的两种横式。     

8031单片机的串口通信功能

研究了8031单片机的串行通信资源，通过实例演示了8031单片机串行通信的硬件与软件设计方法。     

单板剪切机数控系统的设计

根据木工单板剪切机工作的特点,研制了一种基于旋转编码器和单片机控制的单板剪切机数控系统,主要由绝对位置测量系统、单片机控制系统、剪切系统和单板夹持系统四部分组成,可以通过设置剪切参数,方便调节剪切长度,最大程度避免浪费,提高工效.     

Overall plan and design of the task management system of ternary optical computer

In this paper an overall scheme of the task management system of ternary optical computer (TOC) is proposed, and the software architecture chart is given. The function and accomplishment of each module in the system are described in general. In addition, according to the aforementioned scheme a prototype of TOC task management system is implemented, and the feasibility, rationality and completeness of the scheme are verified via running and testing the prototype.     

Implementation of advanced peripheral bus interface for MV1O MCU

MV10 is an MCU which consists of PWM,ADC,CAN and some other function blocks.It is designed for car body's control.Advanced peripheral bus (APB) is a low speed AMBA bus connecting low-power peripherals.This paper presents an implementation of APB interface for MV10 MCU.After that,MV10 can be integrated into any AMBA system on chips (SoCs) easily.We have built a multi-core system with ABMA to verify this design.In this system ARM9 is a main processor mounted on AHB and MV10 acts as a low-power and low-speed slaver on APB.Before building this system,some operations are encapsulated into a task with dedicated ID.MV10 works as a co-processor with ARM by acquiring task ID from ARM.The result of simulation indicates that MCU can work well as expected.Based on our design,MV10 can be mounted on any AMBA system from now on.     

单片机控制硫化过程的研究与应用

文章阐述了单片机GMS97L52在控制硫化过程中的应用，具体介绍了系统的特点、系统硬件的设计方案、电路的组成、工作原理及软件的设计方案。