步进式冷床的结构分析及其现场维护

介绍了特钢厂800轧线大棒步进式冷床的结构形式及工作原理。总结了该装置使用以来由于设备安装缺陷而产生的故障,并对部分改进方案的实施性、可靠性进了的分析,并采取了相应的改进措施。     

Performance differences when using 26- and 29-inch-wheel bikes in Swiss National Team cross-country mountain bikers

The purpose of this study was to analyse the effect of bike type – the 26-inch-wheel bike (26“ bike) and the 29-inch-wheel bike (29“ bike) – on performance in elite mountain bikers. Ten Swiss National Team athletes (seven males, three females) completed six trials with individual start on a simulated cross-country course with 35 min of active recovery between trials (three trials on a 26“ bike and three trials on a 29“ bike, alternate order, randomised start-bike). The course consisted of two separate sections expected to favour either the 29“ bike (section A) or the 26“ bike (section B). For each trial performance, power output, cadence and heart rate were recorded and athletes’ experiences were documented. Mean overall performance (time: 304 ± 27 s vs. 311 ± 29 s; P < 0.01) and performance in sections A (P < 0.001) and B (P < 0.05) were better when using the 29“ bike. No significant differences were observed for power output, cadence or heart rate. Athletes rated the 29“ bike as better for performance in general, passing obstacles and traction. The 29“ bike supports superior performance for elite mountain bikers, even on sections supposed to favour the 26“ bike.     

车辆轮轴称重仪的误差分析

轮轴称重仪是测量车辆各轮、轴重及车辆总重的称重仪器,影响轮轴称重仪称重误差的因素很多,本文将车辆本身结构对轮轴称重仪的误差影响及其他因素的误差影响进行全面分析.     

4×4载货汽车的设计要点技术分析

以一吨4×4载货汽车的设计为例，对特殊性能进行专门系统的理论分析，寻求比较合适的4×4载货汽车的设计要点。通过计算分析，得出在轴距的选择、轮距的确定、动力总成及各大总成的布置、横向稳定杆的选择、汽车的摆振控制等方面应重点考虑，才能使4×4载货汽车设计趋于合理。     

Experimental Investigation of Modified Polypropylene Shell-Tube Column Using Humidification-Dehumidification Desalination Process

The desalination of brackishor sea wateris widelyap-plied to the water supply in China and around theworld[1—4]. The common desalination methods , such asmultistage flesh, multi-effect distillation and reverse osmo-sis, usually require high initial costs and skill oper-ation[5 ,6]. For this reason,these desalination techniquesare mostlyreliable for large capacity of fresh water produc-tion but not economical in the water-shortage areas wherewater demand is decentralized or proper infrastructu…     

高炉不停风更换转炮减速机蜗轮的方法

文章概述了高炉电动泥炮的主要机构及其转炮的工作情况,分析了高炉不停风更换转炮减速机蜗轮的原因,并提出更换转炮减速机蜗轮的方法.     

540MPa级高强度滚型车轮用钢的研制与应用

通过在碳锰钢的基础上添加Nb微合金化元素,成功开发出珠光体占10%的铁素体＋珠光体组织的高强度车轮用钢,该钢钢质纯净、晶粒细小、强度高、成形性能优良,已成功应用于轿车轮辋制造。     

刚玉类砂轮对轴承钢工件磨削表面质量的影响

针对生产中存在的轴承钢工件淬火处理后磨削表面质量不易保证这一实际问题,分别使用刚玉系列的几种砂轮磨削淬火轴承钢工件,测量出了工件表层的显微硬度、表面粗糙度和波纹度,并且以此来评定了各种刚玉砂轮磨出的工件表面质量的状况。同时,在每种砂轮的磨削过程中,还测量了磨削力、砂轮表面形貌和磨损的变化情况,分析了各种刚玉砂轮影响轴承钢工件磨削表面质量的机理。     

成形磨齿表面粗糙度分析及实验研究

表面粗糙度是用来评价一个加工后的零件的几何精度的标准,影响表面粗糙度的因素很多,其中包括砂轮的表面特性、形貌、磨削工艺参数等。通过磨削工艺实验并对数据分析找出表面粗糙度的影响因素及其变化规律,这样能够更好地找出使粗糙度变低的磨削参数以及砂轮的修整参数,所得出的参数能够为降低粗糙度提供更为充足的数学依据。