金属焊接质量的红外成像检测

介绍一种基于红外成像技术的金属焊接质量的无损检测方法.首先介绍了检测的基本原理和检测装置,然后详细给出了以边缘检测为基础的缺陷检测方法及检测结果.最后通过比较说明,利用红外成像技术对金属焊接质量进行无损检测是一种很有效的方法.     

New insights into brazilwood lake pigments manufacture through the use of historically accurate reconstructions

A multi-analytical approach for the study of brazilwood and its lake pigments was carried out based on historically accurate reconstructions. Recipes for brazilwood lakes from the fifteenth century technical text Livro de como se fazem as cores and the Winsor & Newton nineteenth century colourman's archive were reproduced and compared. Both primary sources allowed for the successful preparation of brazilwood lake pigments with colours that vary from light pink to dark red. The main steps and ingredients for the manufacture of these pigments were common in both sources, particularly the addition of Al³⁺ in the form of alum, and calcium carbonate (chalk). Reconstructions revealed that the latter acts as a pH buffer and filler, controlling the pH at which the lake pigment precipitates. The main difference between the two sources is that the nineteenth century recipes give the quantities for all ingredients, the precise temperatures and time, and achieved higher relative pigment yields (75% versus 45%). Full chemical characterisation of the reconstructions provided detailed information on the individual steps in the pigment manufacture and revealed that the presence of calcium sulphate dihydrate (gypsum) in the final pigment was a result of its formation in situ. Infrared, reflectance, and fluorescence spectroscopy proved to be essential and complementary techniques: while infrared was used to characterise additives and binders, reflectance and fluorescence data were fundamental for identifying the chromophore. The pigments and paints produced can now be used as standards for the identification and investigation of brazilwood lake pigments found in artworks.     

基于鉴相原理的高性能金属探测仪的设计

本文所设计的金属探测仪主要用于探测食品中微粒金属的含量.根据电磁场中恒速通过金属微粒会引起接收载波信号相角变化这一现象来检测金属微粒.该金属探测仪主要由发射机单元和接收机单元组成.利用鉴相原理设计锁相接收机以提高灵敏度.通过厂家现场长期使用表明该方案完全可行.     

水杨酸铁的流变相合成和红外光谱

用流变相反应法合成了水杨酸铁配合物，对样品在4000—400cm^-1。范围内的主要红外光谱吸收峰进行了归属，通过元素分析、TG和IR确定该配合物的组成为Fe(HSal)3．3H2O(HSal=O-OHC6H4CO2)。     

基于AT89C51单片机的苯类检测仪的设计

基于AT89C51单片机的苯类检测仪由AT89C51单片机、苯类传感器、12位A／D转换器TLC2543组成,以液晶屏显示苯类含量．软件系统包括初始化程序、数据采集程序和显示程序三部分．     

Infrared Absorption Spectra of Serpentine Cat＇s Eye from Sichuan Province of China

Infrared （IR） absorption spectra and X-ray powder diffraction （XRD） patterrns of sexpenfine cat＇s eye from Sichuan Province have been investigated, and infrared absorption bands of the serpentine have been assigned in this paper. The results indicate that the bands near 3 600 - 3 700 cm^-1 belong to the stretching absorption band VOH, the bands in 948 - 1 100 cm^-1 axe assigned to the stretching vibraling band Usvo, and the bands at 600 570 and 440 cm^-1 respectively belong to the bending vibration band VOH, δMg-O and δSi-O. The serpentine cat＇ s eye includes two types： chrysotile and antigorite. Chrysotile has a sharp and intensive band at 3 688 cm^-1 and a weak band at 3 643 cm^-1 , while antigorite has only one intensive band in the region. At vibration band VSi-O, chrysotile and antigorite have a similar feature at 1 071 cm^-1, but the band at 980 cm^-1 in anfigorite has been split into two bands in chrysotile - a strong one at 1 027 cm^-1 and a weak one at 949 cm^-1. In addition, antigorite has a characteristic bending vibrating band δMg-O at 570 cm^-1. Based on the analysis of the feature of crystal structure, their IR differences axe well explained.     

智能车光电传感器和摄像头的选择

智能车设计综合了光学传感器、硬件电路和软件算法等多方面跨领域的知识技巧。本文针对黑白赛道智能车的赛道光学识别模块,系统地介绍了红外反射式光电传感器、激光传感器和可见光摄像头的实现原理及硬件电路;同时结合实际比较了其优缺点。     

取代基酞菁铜的合成与表征

首先以3,6-二羟基邻苯二甲腈和氯代正丁烷为起始反应物,在无水碳酸钾的催化作用下,经亲核取代反应,在DMF（N,N-二甲基甲酰胺）溶剂中合成了中间配体3,6-二丁氧基邻苯二腈,再以此配体和氯化亚铜为前体,采用DBU液相催化法合成了周边烷氧基取代的1,4,8,11,15,18,22,25-八丁氧基酞菁铜,经过元素分析、红外、荧光、紫外可见光谱和原子吸收表征证明,产物就是目标化合物取代基酞菁铜。     

夜视成像技术与图像融合算法的研究

夜视成像技术是借助于光电成像器件实现夜间观察的一种新的光电技术。本文扼要阐述了夜视成像技术中的红外夜视技术、激光夜视技术和微光夜视技术的基本原理,并以此重点研究分析夜视成像技术的四种图像融合算法：灰度调制融合法、加权平均法、微分算子法和基于小波变换的图像融合方法。     

大孔吸附树脂柱色谱法分离纯化重楼皂苷过程中的质量控制与评价

以重楼根茎粉末为原料,加热回流提取粗皂苷后,用近红外在线检测AB-8大孔吸附树脂除杂和洗脱分离的全过程,并以近红外光谱判别变量为表征手段,将分离过程分为四个阶段。分别对每个阶段收集的洗脱液进行比色和水解,通过离线的紫外光谱和高效液相色谱分析,结果显示,用70%的乙醇对大孔吸附树脂中除杂以后的重楼总皂苷进行洗脱,基本能将重楼总皂苷分为几类有效组分群。