一种平面四连杆机构轨迹综合的新方法

根据平面闭合曲线切线象理论，定义了切线全旋转角的概念，提出并论证了一种用曲线的曲率关于切线全旋转角的函数和进行平面四连杆机构轨迹综合的新方法。这是一种可应用于工程设计的几何系统分析法。     

CORDIC algorithm based on FPGA

It is an important problem that we implement floating point trigonometric functions of high precision with suitable hardware cost for high performance in digit image processing.The coordinate rotational digital computer (CORDIC) arithmetic to is used to solve the above problem in this paper.In order to increase the speed of operation,it chooses the pipeline architecture.The results are disposed by IEEE-754 standard.The CORDIC architecture is modeled by using the verilog HDL and verified with MATLAB program ...     

利用PLC中断功能测定转速

介绍了利用PLC中断功能测定转速的原理,方法及软件设计。     

基于四阶累积量的CSPRIT算法

分析了基于二阶统计的CSPRIT算法在空间相关高斯噪声环境中存在的问题，提出将四阶累积量与CSPRIT算法相结合，处理一维二元相移键控信号（BPSK）和多元幅移键控信号（MASK），实现信号到达角（DOA）的估计和波束形成器的构造。与基于二阶统计的CSPRIT算法相比，基于四阶累积量的改进算法能够有效抑制空间相关的高斯噪声，提高信号估计精度。计算机仿真验证了该算法的有效性。     

任意六边形匀质刚板绕垂直板面质心轴的转动惯量公式

提出任意六边形匀质刚板绕垂直板面质心轴的转动惯量的几何方法,并且符合一些特例的转动惯量公式。     

热管系统作为连铸结晶器的试验研究

将热管系统的蒸发器作为连铸结晶器,通过测试蒸发室及熔融室内的温度,揭示热管运行温度和熔融室温度的关系。结果表明：在普通环境温度下和物质熔融温度为160℃时．热管工作温度为50-70℃,热管系统蒸发器面积和冷凝器面积之比从1：15增加到1：30时。热管工作温度降低较快,下降约23％;当面积比从1：30增加到1：60时,下降约8％：将热管系统运用于连铸生产时．增大热管系统的冷凝器面积,可以降低热管工作温度。但降低程度随面积比的增大而减小;当用于镁合金连铸时,热管的运行温度将超过100℃．     

Validation of a videogrammetry technique for analysing American football helmet kinematics

ABSTRACT

Professional American football games are recorded in digital video with multiple cameras, often at high resolution and high frame rates. The purpose of this study was to evaluate the accuracy of a videogrammetry technique to calculate translational and rotational helmet velocity before, during and after a helmet impact. In total, 10 football impacts were staged in a National Football League (NFL) stadium by propelling helmeted 50th percentile male crash test dummies into each other or the ground at speeds and orientations representative of concussive impacts for NFL players. The tests were recorded by experienced sports film crews to obtain video coverage and quality typically available for NFL games. A videogrammetry procedure was used to track the position and rotation of the helmet throughout the relevant time interval of the head impact. Compared with rigidly mounted retroreflective marker three dimensional (3-D) motion tracking that was concurrently collected in the experiments, videogrammetry accurately calculated changes in translational and rotational velocity of the helmet using high frame rate (two cameras at 240 Hz) video (7% and 15% error, respectively). Low frame rate (2 cameras at 60 Hz) video was adequate for calculating pre-impact translational velocity but not for calculating the translational or rotational velocity change of the helmet during impact.     

旋转二次曲面透镜基点和基面的位置确定

在光学仪器中,非球面透镜具有一定的实用价值,故对旋转二次曲面透镜光学性质的研究将有重要意义．根据等效光学系统理论和旋转二次曲面折射的焦距公式,并考虑了透镜两曲面的不同形状及不同曲率,导出了旋转二次曲面透镜的主距公式和焦距公式,统称为旋转二次曲面的基点位置公式．这些公式具有一般性,该文进行了分类讨论,最后给出了应用实例     

并流多效蒸发器设计中遗传算法的应用

应用遗传算法对并流多效蒸发器设计进行计算结果表明,采用遗传算法比传统的迭代法更准确、有效.     

旋转梁在横向铰支纵向自由约束下的耦合振动

研究绕一端旋转的弹性梁产生的拉压与弯曲的复合振动，采用分离变量法，求出旋转梁在横向受两端固定铰链约束、纵向两端自由弯曲和拉压耦合振动的微分方程通解．