| 基于MOLDFLOW的板状注塑件加强筋优化设计 |
| |
| 引用本文： | 尤芳怡,刘晶峰,戴秋莲,吴彦鹏. 基于MOLDFLOW的板状注塑件加强筋优化设计[J]. 泉州师范学院学报, 2013, 0(6): 60-63 |
| |
| 作者姓名： | 尤芳怡 刘晶峰 戴秋莲 吴彦鹏 |
| |
| 作者单位： | [1]华侨大学机电及自动化学院,福建厦门361021 [2]华侨大学计算机科学与技术学院,福建厦门361021 |
| |
| 基金项目： | 国家自然科学基金项目（51375180）;中央高校基本科研业务费专项基金资助项目（JB-ZRl209） |
| |
| 摘 要： | 设置加强筋有利减小注塑件壁厚并降低充模阻力，但由于加强筋与塑件基体壁厚有差异会造成冷却和收缩不均，从而使塑件产生翘曲变形．借助Moldflow软件对典型板状注塑件进行模拟注塑成型分析，通过改变加强筋的尺寸研究加强筋的高度及厚度对塑件收缩和翘曲变形的影响规律．基于翘曲变形量优化设计加强筋尺寸，结果表明：典型板状塑件的加强筋的高度为塑件厚度的两倍，加强筋厚度应小于塑件厚度的0．5倍，此时塑件的翘曲变形量较小．
|
| 关 键 词： | 饭状注塑件 翘曲变形 收缩 加强筋 Moldflow软件 |
Optimize Design of the Rib of Injected Panel Parts with Moldflow |
| |
| YOU Fang-yi,LIU Jing-feng,DAI Qiu-lian,WU Yan-peng. Optimize Design of the Rib of Injected Panel Parts with Moldflow[J]. Journal of Quanzhou Normal College, 2013, 0(6): 60-63 |
| |
| Authors: | YOU Fang-yi LIU Jing-feng DAI Qiu-lian WU Yan-peng |
| |
| Affiliation: | 1.College of Mechanical Engineering and Automation, Huaqiao University,Fujian 361021 ,China; 2.College of Computer Science and Technology, Huaqiao University,Fujian 361021 ,China) |
| |
| Abstract: | Rib can reduce the wall thickness of an injection molded part,and can reduce the filling resistance of cavity.But uneven cooling speed and shrinkage will occur because of the different thickness between the rib and the part.Then the part will be warped.The software Moldflow was used to analyze shrinkage ratio and warped deformation of an injected panel parts.Change the dimension of the rib,the effects of thickness and height of the rib on the shrinkage ration and warped were discussed.Optimize design the size of the rib based on warped deformation.The results show that when the height of the rib is double the well thickness of the part and the thickness of the rib is less than half of the thickness of the parts, the warped deformation of the part will be well reduced. |
| |
| Keywords: | injected panel parts warped deformation shrinkage rib ~ Moldflow |
| 本文献已被 维普 等数据库收录！ |
