| 基于监测技术的注塑工艺参数研究 |
| |
| 引用本文： | 李栋,陈良波.基于监测技术的注塑工艺参数研究[J].福建工程学院学报,2014,0(3):246-249. |
| |
| 作者姓名： | 李栋 陈良波 |
| |
| 作者单位： | 集美大学计算机工程学院 |
| |
| 摘 要： | 模腔温度对塑料制品的表面质量具有很大的影响。借助奇石乐模腔温度测量传感器，直接测量注塑成型过程中，塑料模具型腔中的温度最大值，然后采用正交实验的方法，分析工艺参数对模腔温度最大值的影响次序，根据效应关系图详细分析工艺参数对模腔温度最大值的影响规律。
|
| 关 键 词： | 模腔温度 正交实验 注塑工艺参数 |
Study on injection moulding process parameters based on monitoring technology |
| |
| Li Dong,Chen Liangbo.Study on injection moulding process parameters based on monitoring technology[J].Journal of Fujian University of Technology,2014,0(3):246-249. |
| |
| Authors: | Li Dong Chen Liangbo |
| |
| Institution: | College of Computer Engineering, Jimei University |
| |
| Abstract: | Cavity temperature exerts a great influence on plastic product surface quality. The maximum injection mould temperature during the injection process was measured via a Kistler cavity temperature sensor. Orthogonal experiment was adopted to analyse the influence order of process parameters affecting the maximum cavity temperature. The law of the process parameters affecting the maximum cavity temperature was analysed based on the effect diagram. |
| |
| Keywords: | cavity temperature orthogonal experiment injection moulding process parameter |
|
| 点击此处可从《福建工程学院学报》浏览原始摘要信息 |
| 点击此处可从《福建工程学院学报》下载免费的PDF全文 |
